In this list you can find new KNX products that have been brought to the market.
The KNX Multi station combines 6 binary inputs, six switching outputs, two integrated room temperature controllers and two inputs for temperature sensors in the REG housing, which is just 4 TE wide. This allows a complete office, hotel or hospital room, for example, to be equipped with all the necessary functions. In order to keep the programming effort low despite this high function density, internal group communication between inputs and outputs as well as for logic functions can be used. KNX installations can thus be implemented efficiently and cost-optimised, especially for room-related applications with repetition factor or as a compact solution for entry into smart home installations. https://www.jung.de/en/online-catalogue/350288497/
The elegant room control unit for the F 50 series combines light, shade and temperature control in one unit. The room controller features an intuitive operating concept and two integrated temperature controllers. The backlit LC display shows the most important values and functions from every angle. The key symbols in the display can be individually selected during programming according to the respective functions. Keys marked with a graphic tool further support the assignment of functions. With the optionally connectable push-button extension module, function extensions are possible simply and cost-effectively. https://www.jung.de/en/5285/products/technology/knx-system/f-50-knx-compact-room-controller/
The "New" in EisBaer 3.0 integrated dynamic load management offers intelligent EV - charging controls integrated into your KNX installation for smart energy consumption control to eliminate the risk of overloading even when multiple chargers are being used simultaneously. EisBaer Scada 3.0 is the visualisation, management and control solution that helps solve the problems caused by the lack of connectivity and communication between KNX and the growing number of devices and systems. The innovative EisBaer multi-protocol engine enables system integrators and end users to communicate with all smart devices, building control and IoT devices in commercial, industrial and residential environments, and provides them with a graphical interface for any computer or smart device.
The Living Emotions® App – The Next Generation KNX Sensor – is the most luxurious sensor replacement with unlimited functionality for smart building control in one single app for iOS. Combined with an Apple Smart Device it enables convenient control and visualization of KNX installations. Choose freely between the simple and clear control from one single room control view in touch sensor design (e.g. for hotel room application) and the structured menu navigation with zones (e.g. in Smart Home). Combine the app with a smart device and the entirely smooth Glass Pad solution for ultra-flat in-wall mounting to create a completely new operating concept for smart building automation. Contact: www.controltronic.com
The next generation of our reliable control server for KNX installations offers computing power for many years. The integrated bus coupler serves as IP interface for ETS and powers the device directly from the KNX bus. Existing EibPC programs are executable without modification. Encrypted web server, VPN, 65,000 processing objects, telegram recording, emails, and much more is available on the EibPC². Our free EibStudio V4 is the graphical logic and visualization editor and project manager. For experts, text-based programming is possible. A display makes commissioning easy and shows system status and user-defined information. http://enertex.de/e-home.html
The KNX Multifunctional Thermostat fits 100% to standard EU 55mm system like Gira, Jung, Berker etc. It’s designed to control HVAC, AC, floor heating, ventilation with both PI and 2-point algorithm. In addition to the built-in temperature sensor, there are 2 extra terminals for external PT1000 sensor connection. The buttons can also be programmed to KNX scene functions, with logic function and scene group function. The product comes with matt and shiny finish in both white and black, contact GVS if it’s interesting.
Enviro is a multifunctional smart panel that runs on KNX. Covered by a 4.3-inch touch screen, it allows you to control lighting, air-conditioning, floor heating, climate, music, shading and more functions intuitively. When your hand approaches the panel, its display will automatically wake up. The icons and captions on the display directly tells you what to control. User-friendly in all types of buildings. Best of all, just ONE Enviro panel is able to control all devices in a room. Summary of main features: Multifunctional controlling; Drag-and-drop to organize icons; Adjustable display brightness; Built-in temperature sensor; Auto display wake up; Able to read and show room temperature
iRidium server UMC is a controller for automation systems, including KNX and IoT devices. It supports KNX, BACnet, Modbus, MQTT, Helvar, Beckhoff ADS and much more. Extensive API, database generation and a most beautiful UI with freehand graphics make it very different from most KNX solutions on the market. IoT-oriented approach gives you access to connection to cloud services with data analytics and a capability for personal developments as well as can be used totally offline. The new C3 model has KNX interface, 1-Wire, CAN and RS485 x 2 (outputs to Modbus RTU or HDL Buspro). When ordering you can choose which interfaces your own iRidium server UMC will have.
The KAA-4R4V dimming actuator is a 4 channels device with high-quality independent latching relay. A DC 0(1)-10V signal to perform the dimming on the connected driver at each channel. The dimming curve can be adjusted to linear or logarithmic mode which is suitable for all kinds of luminaire. The product specification indicates the maximum number of LED driver per channel which is easy for building planning. KNX system integrators can easily program it through the ETS system, and it can be operated manually via a push button. The compact design with 4 SU(72mm) wide modular makes it suitable for quick and simple installation, and one green LED on each channel for indicating the switching status.
The USB-Connector is more than just a classic KNX USB interface. It combines KNX USB interface, IP router and analysis tool in one device. As an integrator you use it to program the KNX network with the ETS. The included software IP router makes a hardware router redundant. The bus monitor is used for analysis and troubleshooting. It logs all telegrams that are transmitted on the KNX bus. Unique filtering capabilities, such as defining and retrieving complex filtering rules, are especially helpful in troubleshooting. For remote maintenance, data can be exported as a CSV file or sent automatically by e-mail.
In addition to the well-known voice assistants Siri, Alexa and Google Home, the new realKNX AIR now also offers an extremely powerful, offline voice control. Privacy is guaranteed, the voice data stays in the room. Finally, voice control is not dependent on updates or internet accounts, it runs as standalone. The vocabulary is not limited: Any words can be used for room and function names. For operation, neither smartphone nor tablet are needed. realKNX AIR comes with a table microphone/speaker that may be connected through USB or WiFi to the installation. The configuration is done via a standard product database in the ETS software. Thus, no specific configuration knowledge is necessary. realKNX offers visualization, voice, logic and augmented reality and it is always based on exactly one data pool. Find more information visit https://proknx.com/realknx
For more than 13 years Siemens offers the KNX Gamma Training Kit, which is perfectly tailored for all KNX certified trainings. Its great advantage is, that it is compact, transportable and offers a huge number of functions. So KNX training can be carried out at any place and with any topic. Now this kit has again been significantly refurbished, as all panels on the right wing are now fastened by camlock screws which serves for quick swapping of the modules. A constantly growing portfolio of additional theme panels enables the user to learn and test practically every situation in a KNX installation. Own devices can as well easily be integrated. More info: http://www.hqs.sbt.siemens.com/cps_product_data/data/en/support/gtk/GTK_5_1_Information_en_2018.pdf
TAPKO extended its product line of 640 mA KNX bus power supplies. The KPS640 has been developed to be able to offer a cost-efficient device having no ETS application together with the world´s narrowest KNX power supplies (IPS640) equipped with diagnostic functions and KNX Data Secure. The internal structure has been optimized under the most modern technical aspects and impresses with quality and reliability. The DIN rail device, which is only 4 SU wide, has an additional unchoked voltage output. The KNX bus can be reset by push button. LEDs indicate overload, reset and normal operation. www.tapko.de/kps640
Vimar’s KNX range of control units has been recently expanded with the addition of new modules with more functions. The range now includes 2- and 3-module devices in three different versions: without actuator, with actuator or with roller shutter actuator. Specifically, the new control unit with roller shutter actuator is a major technological development, specifically designed to meet current market needs. One of the main novelties of this new control unit is that it can be connected directly to the motor of the shutter, thus allowing for more streamlined and immediate wiring, which makes things easier for the installer who no longer has to connect the wiring to the electrical panel. https://www.vimar.com/en/int/vimar-knx-controls-14705132.html
The KNX IP Multi IO 580 is a universal input and output device with 48 channels for direct connection to KNX IP. Each channel can be configured as input or output. The inputs are designed for floating contacts and can be used to control e.g. lights or blinds. The outputs can control signal LEDs or external coupling relays. With the IO Extensions 590 and 592 from Weinzierl, bi-stable relays and shutter relays are also available. The device is also available as TP version with an integrated USB interface. Both devices offer a fast download via IP or USB. An OLED display on the front allows manual operation. www.weinzierl.de/en/products/580
Multifunctional (lighting, shutter, blind, FCU valve -on-off and floor heating) relay module of Interra with extended parameter. 16A@250AC, 165 mA inrush. From 4 up to 24 channel variants. Only one combo for all your needs. Lighting. - Heating. - Shutter and Blind. - Shutter and Blind 24V. - Fan Coil 2 pipes. - Fan Coil 4 pipes The combo has been developed for providing the whole control in the residential and hotel sectors. The use of this device guarantees the efficient management and provision of rooms. www.interra.com.tr