Seminarios web

La Asociación KNX ofrece muchos seminarios web para informarle sobre diversos temas relacionados con KNX. Se trata de presentaciones en línea sobre temas técnicos y no técnicos que usted puede seguir desde detrás de su ordenador. Además, también puede interactuar si tiene preguntas.

A continuación puede ver una lista de todos los seminarios web que ofrecemos. Haga clic en el título del seminario web para ver mas información, fechas y registros.

Información adicional

  • Todos los seminarios web se ofrecen de una manera completamente gratuita
  • Tiene que registrarse previamente para poder participar en un seminario web
  • Regístrese lo antes posible, ya que siempre hay un límite de registro
  • Después de registrarse recibirá un enlace para unirse al seminario web
  • Si no tiene unos auriculares, también puede unirse al seminario web por teléfono
  • Compruebe esta página con frecuencia, ya que se añaden nuevas fechas de vez en cuando

¡Esperamos conocerle pronto en línea en uno de nuestros seminarios web!

Tipo de Webinar

Webinar Período de tiempo

Webinars para


Create an HVAC function with ETS5 Professional

The webinar is based on KNX Virtual, we therefore recommend to have a look at it prior to the webinar.
- more information can be found here: https://support.knx.org/hc/en-us/sections/360000827779-KNX-Virtual
- especially the videos on this page might be interesting to you: https://support.knx.org/hc/en-us/articles/360002413240-What-is-KNX-Virtual-
- KNX Virtual can be found here: https://my.knx.org/shop/product?product_type_category=software&product_type=knx-virtual

-----------------------------------------------------------------------------------
The presented HVAC function will include:
- heating and cooling
- comfort mode and standby mode
- building protection mode in combination with window contacts (via binary input)
- outside temperature (via weather station)

During this webinar the following aspects/features will be explained too:
- KNX devices: programming mode & reset via ETS
- ETS group monitor

Language: English

From: 06-08-2019 10:00
To: 06-08-2019 11:00


Intended for:
- Newcomers

Create an HVAC function with ETS5 Professional

The webinar is based on KNX Virtual, we therefore recommend to have a look at it prior to the webinar.
- more information can be found here: https://support.knx.org/hc/en-us/sections/360000827779-KNX-Virtual
- especially the videos on this page might be interesting to you: https://support.knx.org/hc/en-us/articles/360002413240-What-is-KNX-Virtual-
- KNX Virtual can be found here: https://my.knx.org/shop/product?product_type_category=software&product_type=knx-virtual

-----------------------------------------------------------------------------------
The presented HVAC function will include:
- heating and cooling
- comfort mode and standby mode
- building protection mode in combination with window contacts (via binary input)
- outside temperature (via weather station)

During this webinar the following aspects/features will be explained too:
- KNX devices: programming mode & reset via ETS
- ETS group monitor

Language: English

From: 13-08-2019 14:00
To: 13-08-2019 15:00


Intended for:
- Newcomers

Create scenes with ETS5 Professional

The webinar is based on KNX Virtual, we therefore recommend to have a look at it prior to the webinar.
- more information can be found here: https://support.knx.org/hc/en-us/sections/360000827779-KNX-Virtual
- especially the videos on this page might be interesting to you: https://support.knx.org/hc/en-us/articles/360002413240-What-is-KNX-Virtual-
- KNX Virtual can be found here: https://my.knx.org/shop/product?product_type_category=software&product_type=knx-virtual

-----------------------------------------------------------------------------------
The presented scenes will include:
- switching and/or dimming control (value) and/or blinds control (position) and/or temperature set point (RTC)
- scene number
- scene 'activation' vs. scene 'learning'

During this webinar the following aspects/features will be explained too:
- KNX devices: programming mode & reset via ETS
- ETS group monitor

Language: English

From: 20-08-2019 10:00
To: 20-08-2019 11:00


Intended for:
- Newcomers

Create scenes with ETS5 Professional

The webinar is based on KNX Virtual, we therefore recommend to have a look at it prior to the webinar.
- more information can be found here: https://support.knx.org/hc/en-us/sections/360000827779-KNX-Virtual
- especially the videos on this page might be interesting to you: https://support.knx.org/hc/en-us/articles/360002413240-What-is-KNX-Virtual-
- KNX Virtual can be found here: https://my.knx.org/shop/product?product_type_category=software&product_type=knx-virtual

-----------------------------------------------------------------------------------
The presented scenes will include:
- switching and/or dimming control (value) and/or blinds control (position) and/or temperature set point (RTC)
- scene number
- scene 'activation' vs. scene 'learning'

During this webinar the following aspects/features will be explained too:
- KNX devices: programming mode & reset via ETS
- ETS group monitor

Language: English

From: 27-08-2019 14:00
To: 27-08-2019 15:00


Intended for:
- Newcomers

KNX RF Multi development

Webinar delivered by Mr. Philippe Magneron, Connected Buildings standardization manager at Hager Controls SAS. This Webinar addresses the development of KNX RF Multi devices and its communication advantages over single frequency devices.

Language: English

From: 12-09-2019 11:00
To: 12-09-2019 12:00


Intended for:
- Developers
- Members

Grabaciones de Webinars

Está ocupado y no puede asistir? O tal vez no hay plaza para usted? No se preocupe, siempre puede reproducir las grabaciones de los webinars aquí.