¿Necesitar ayuda?
Centro de soporte
Selbu Sykehjem
Health care in Selbu
Aplicaciones utilizadas
Iluminación
HVAC
Seguridad y protección
Operación y visualización
Gestión de la energía / Medición inteligente
Otro
Automatización y acceso remoto
Control de persianas y contraventanas
Detalles del proyecto
| Categoría | Valor |
|---|---|
| Categoría del proyecto | Health care |
| Tipo de proyecto | Commercial |
| Año de finalización | 2020 |
| Tamaño del proyecto | 5.000+ |
| Número de dispositivos KNX utilizados | 301 – 500 |
| Medios de transmisión KNX | Twisted pair |
| Horas-hombre | 251 – 500 |
| Mano de obra | 1 – 5 |
Presentado en este proyecto
Descripción detallada
Energy Efficiency
The usage of automated functions already save energy in every installation. Especially the usage of KNX has a lot of potential for further energy savings, which can contribute to a better environmental footprint. Be extending KNX to more functions and applications, energy savings of up to 60% can be realised. Thanks to the flexibility of KNX, these functions can easily be implemented in this installation
Innovación
Smart homes and buildings are always an upgrade in comparison to a conventional installation. Not only automated functions and a higher level of comfort contribute to a higher living standard, but also the possibility to be ready for coming innovations. Thanks to the usage of KNX, the door has been opened to integrate new innovative solutions, using the worldwide STANDARD for home and building control.
Aplicaciones utilizadas
- Iluminación
- HVAC
- Seguridad y protección
- Operación y visualización
- Gestión de la energía / Medición inteligente
- Otro
- Automatización y acceso remoto
- Control de persianas y contraventanas
Descripción de los clientes
Selbu Sykehjem is a nursing home of 10.000 m2. It has 52 nursing beds and also houses most of the healthcare functions in Selbu. In this installation KNX is used for controlling lighting, heating, ventilation (VAV) and sunprotection. All the lighting is controlled by DALI, and the corridorlights are also HCL which means that the colortemperature is adjusted to simulate the natural daylight. This is done by a HCL Scheduler that sends out telegram with temperature each minute to KNX/DALI. The heating in this building is mostly based on floorheating (water). This is controlled by KNX thermostats and valveactuators. Ventilation (VAV) is also controlled by KNX, this is done by combining temperature/co2/movement which controls the VAV actuators.
Información del contacto
| nombre de empresa | Proel AS |
| Correo electrónico de la empresa | sjs@proel.no |
| Company Website | http://www.proel.no |
| Nombre del contacto | Stig Joar Sanden |
| Función de contacto | System Integrator |
