¿Necesitar ayuda?
Centro de soporte
Meldal Helsetun
Health care in Meldal
Aplicaciones utilizadas
Iluminación
HVAC
Seguridad y protección
Operación y visualización
Gestión de la energía / Medición inteligente
Otro
Automatización y acceso remoto
Control de persianas y contraventanas
Detalles del proyecto
| Categoría | Valor |
|---|---|
| Categoría del proyecto | Health care |
| Tipo de proyecto | Commercial |
| Año de finalización | 2025 |
| Tamaño del proyecto | 5.000+ |
| Número de dispositivos KNX utilizados | 501 – 1.000 |
| Medios de transmisión KNX | Twisted pair |
| Horas-hombre | 501 – 1.000 |
| Mano de obra | 1 – 5 |
Presentado en este proyecto
Descripción detallada
Energy Efficiency
The usage of automated functions already save energy in every installation. Especially the usage of KNX has a lot of potential for further energy savings, which can contribute to a better environmental footprint. Be extending KNX to more functions and applications, energy savings of up to 60% can be realised. Thanks to the flexibility of KNX, these functions can easily be implemented in this installation
Innovación
Smart homes and buildings are always an upgrade in comparison to a conventional installation. Not only automated functions and a higher level of comfort contribute to a higher living standard, but also the possibility to be ready for coming innovations. Thanks to the usage of KNX, the door has been opened to integrate new innovative solutions, using the worldwide STANDARD for home and building control.
Aplicaciones utilizadas
- Iluminación
- HVAC
- Seguridad y protección
- Operación y visualización
- Gestión de la energía / Medición inteligente
- Otro
- Automatización y acceso remoto
- Control de persianas y contraventanas
Descripción de los clientes
The new Meldal Helsetun in Orkland municipality is designed for 75 housing units, and currently accommodates a total of 67 residents. The building also houses 50 care homes in shared housing units, 25 institutional beds for short-term stays and rehabilitation and base for the home care service. The building mass has a total floor area of approximately 9,400 square meters.
KNX was chosen as the preferred system for controlling of light with the use of DALI. The emergency lighting is also controlled and supervised via KNX and DALI, and this is reported back to the buildings BMS system for visualisation and logging. The communication with the BMS system is done with BacNet.
With KNX and DALI the customer has got a system that can easily be adjusted to meet the desired functions.
Información del contacto
| nombre de empresa | Proel AS |
| Correo electrónico de la empresa | sjs@proel.no |
| Company Website | http://www.proel.no |
| Nombre del contacto | Stig Joar Sanden |
| Función de contacto | System Integrator |
