Selbu Sykehjem

Health care in Selbu

Applicazioni utilizzate

Illuminazione

Riscaldamento, ventilazione e condizionamento dell'aria (HVAC)

Sicurezza e incolumità

Funzionamento e visualizzazione

Gestione dell'energia/Smart metering

Altro

Automazione e accesso remoto

Controllo di tapparelle e persiane

Dettagli del progetto

Categoria Valore
Categoria del progetto Health care
Tipo di progetto Commercial
Anno di completamento 2020
Dimensioni del progetto 5.000+
Numero di dispositivi KNX utilizzati 301 – 500
Mezzi di trasmissione KNX Twisted pair
Ore-uomo 251 – 500
Manodopera 1 – 5

In evidenza in questo progetto

ABB AG - STOTZ-KONTAKT
ise Individuelle Software und Elektronik GmbH
BELIMO Automation AG
Glamox AS

Descrizione dettagliata

Energy Efficiency

The usage of automated functions already save energy in every installation. Especially the usage of KNX has a lot of potential for further energy savings, which can contribute to a better environmental footprint. Be extending KNX to more functions and applications, energy savings of up to 60% can be realised. Thanks to the flexibility of KNX, these functions can easily be implemented in this installation

Innovazione

Smart homes and buildings are always an upgrade in comparison to a conventional installation. Not only automated functions and a higher level of comfort contribute to a higher living standard, but also the possibility to be ready for coming innovations. Thanks to the usage of KNX, the door has been opened to integrate new innovative solutions, using the worldwide STANDARD for home and building control.

Applicazioni utilizzate

  • Illuminazione
  • Riscaldamento, ventilazione e condizionamento dell'aria (HVAC)
  • Sicurezza e incolumità
  • Funzionamento e visualizzazione
  • Gestione dell'energia/Smart metering
  • Altro
  • Automazione e accesso remoto
  • Controllo di tapparelle e persiane

Descrizione dei clienti

Selbu Sykehjem is a nursing home of 10.000 m2. It has 52 nursing beds and also houses most of the healthcare functions in Selbu. In this installation KNX is used for controlling lighting, heating, ventilation (VAV) and sunprotection. All the lighting is controlled by DALI, and the corridorlights are also HCL which means that the colortemperature is adjusted to simulate the natural daylight. This is done by a HCL Scheduler that sends out telegram with temperature each minute to KNX/DALI. The heating in this building is mostly based on floorheating (water). This is controlled by KNX thermostats and valveactuators. Ventilation (VAV) is also controlled by KNX, this is done by combining temperature/co2/movement which controls the VAV actuators.

Informazioni sui contatti

Nome dell'azienda Proel AS
Email aziendale sjs@proel.no
Sito web aziendale http://www.proel.no
Nome del contatto Stig Joar Sanden
Funzione di contatto System Integrator