Besoin d'aide ?
Centre d'assistance
Boutique MyKNX
Logiciel ETS
Téléchargez ETS pour concevoir, mettre en service et gérer des projets KNX. Commencez par un essai gratuit ou choisissez une licence.
Applications ETS
Les applications ETS enrichissent votre flux de travail ETS grâce à des outils spécialisés pour la documentation, la mise en service, le diagnostic, et bien plus encore. Visitez notre boutique pour découvrir les applications ETS disponibles.
Image
Image
Bosch / Buderus office in Lviv, Ukraine
Office building in Lviv
Applications utilisées
Lighting
Heating, Ventilation & Air conditioning (HVAC)
Security and Safety
Operation and Visualisation
Energy Management/Smart Metering
Other
Automation and Remote Access
Blind and Shutter Control
Détails du projet
| Catégorie | Valeur |
|---|---|
| Catégorie de projet | Office building |
| Type de projet | Commercial |
| Année d'achèvement | 2019 |
| Taille du projet | 101 – 500 |
| Nombre d'appareils KNX utilisés | 1 – 25 |
| Supports de transmission KNX | Twisted pair |
| Heures-hommes | 101 – 250 |
| Main-d'œuvre | 1 – 5 |
Mis en vedette dans ce projet
Description détaillée
Energy Efficiency
The usage of automated functions already save energy in every installation. Especially the usage of KNX has a lot of potential for further energy savings, which can contribute to a better environmental footprint. Be extending KNX to more functions and applications, energy savings of up to 60% can be realised. Thanks to the flexibility of KNX, these functions can easily be implemented in this installation
Innovation
Smart homes and buildings are always an upgrade in comparison to a conventional installation. Not only automated functions and a higher level of comfort contribute to a higher living standard, but also the possibility to be ready for coming innovations. Thanks to the usage of KNX, the door has been opened to integrate new innovative solutions, using the worldwide STANDARD for home and building control.
Applications utilisées
- Lighting - Switching, Constant Light Control
- Heating, Ventilation & Air conditioning (HVAC) - Central & Automatic Control, Individual Room Control / Zone Control, Valve Drive Control / Fan Coil Control, Natural Ventilation, Floor Heating Control, Boiler and burner Control
- Security and Safety
- Operation and Visualisation - Switches / Push Buttons, PC Visualisation, Touch Panels & Display Panels, Tablets and smart phones
- Energy Management/Smart Metering - Metering, Visualisation, Current Detection
- Other
- Automation and Remote Access - Internet Access
- Blind and Shutter Control
Description des clients
The office is located in an old boiler house where we have implemented the concept of an energy efficient office with minimal heat losses at the A ++ class level.
For the heating and cooling of the premises, a combined system was implemented where the main source is 2 Buderus WPL air-to-water heat pumps and Bosch Compress 3000 AWS with a capacity of 17 kW each. An additional source of heating is the cascade of condensing gas boilers Logamax plus GB172i, with a total power of 48 kW.
In addition, Logasol SKT 1.0 solar collectors are installed for hot water preparation. KNX control system with open protocol controls ventilation, heating and cooling, power consumption, office lighting and dynamically different areas of the building.
Gira visualization and Zennio button interfaces are used to control light and climate.
Lighting in the office area is maintained automatically by Jung sensors
The KNX Bosch-X10 module provides complete fuel control
Coordonnées
| Nom de l'entreprise | IQdim |
| E-mail de l'entreprise | iqdim.ua@gmail.com |
| Company Website | http://iqdim.com/ |
| Nom du contact | Roman |
| Fonction de contact | Installer |
