Dinuy Thermostat
TM KNT 001_002
ATTENTION:
ETS application valid for versions S1.2 or lower (see the back of the product)
· The new DINUY Touch Temperature Room Controllers are built on a functional evolution of the Laüka Capacitive Push Buttons.
· Two different models are available :
· TM KNT 001: with key for adjusting the fan speed of the fan coil.
· TM KNT 002: with key for setting the HVAC operating mode.
· Among their keys, there are 2 freely-configurable buttons, which can be configured as a Switch, Dimmer, Control of Blinds / Awnings, Scenes, etc.
· The 2 freely-configurable buttons incorporate an RGB LED for pressing or state advice.
· Incorporate a Display that shows both the Setpoint or Ambient Temperature and the Relative Humidity of the environment.
· Built-in Temperature, Luminosity and Relative Humidity Sensors.
· Their main functionality is complemented by 4 Binary / Analog Inputs, which can be connected to a Door / Window Sensor or a DINUY Temperature Probe.
· They have 4 keys with preset functionality and 2 freely configurable ones.
· No need external power, only the KNX Bus.
· Flush-mounting design in universal mechanism boxes.
· Programming and commissioning via ETS5 or later versions
| Catégorie | Valeur |
|---|---|
| Catalog Item Name | Dinuy Thermostat |
| Application Program Name | TMKNT001_002 |
| Order Number | TM KNT 001_002 |
| Rail Mounted | Non |
| Manufacturer Website | Dinuy |
