Zur Startseite

Nouveaux Produits KNX

Dans cette liste, vous pouvez trouver de produits KNX récemment mis sur le marché.

Société Nom
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
  • #

Total: 132 produits

  • -

    The online KNX Tool is the perfect tool for system integrators to efficiently sell smart home and building automation projects. It creates stylish documents, saves time and keeps the focus on the functions you are selling. The KNX Tool has many new features such as an ETS lookalike online catalog from where you can download KNX devices with pictures into your own database. It has an improved PDF design for function description and actuator lists, new device types such as push buttons and displays with multiple pages and functions with calculation like square meter price, as well as branding of PDF reports with multilingual support plus many other new features.

    Website: http://www.3atel.es


    Somfy continues to improve the performance of façades by developing intelligent controls and motors for solar shading. The latest product extends the complete animeo KNX solution, offering a high functional level for occupants, facility managers and system integrators. The animeo KNX RTS receiver 433 MHz is a single gateway opening the RTS protocol to the KNX world to manage all devices such as solar shading, lighting, HVAC, etc. It can be implemented anywhere on the KNX bus, allowing the RTS (Radio Technology Somfy) remote control range to be used. Thanks to the cost-effective animeo KNX RTS receiver, wireless local and group commands (ten groups per interface) are possible without any motor controllers.

    Website: http://www.3atel.es


  • A

    Smart Buildings under control? With the new ABB Logic Controller ABA/S 1.2.1, system integrators can quickly and flexibly deal with the most challenging project requirements – with a maximum level of freedom in design. That is because the logic controller can easily and reliably accommodate altered or extended functionality requests during the construction or usage of buildings.

    Website: http://www.abb.com/knx


    The F50 KNX compact room controller appeals due to its intuitive operation and two built-in temperature controllers. The backlit LCD clearly shows the most important values and functions, irrespective of the viewing angle. Depending on the respective functions, the button icons shown on the display may be individually selected during programming. Buttons labelled using the graphic tool further assist the user in assigning functions; the same applies to the RGB status LED. Push button sensor or controller functions may be assigned to each of the room controller buttons.

    Website: http://www.jung.de


    Simulating daylight by changing the colour temperature (Tunable White): lighting which is based on daylight noticeably promotes our performance curve. The Jung KNX / DALI gateway TW forms the interface for controlling DALI Tunable White luminaires and other DALI luminaires in a KNX installation. The colour temperature and brightness can thus be set independently or combined if required. The behaviour of an incandescent lamp can for example be readjusted by dimming down the colour temperature in warmer areas and dimming it up in colder areas. It is the first KNX device to offer this functionality to such an extent.

    Website: http://www.jung.de


    The modules, designed and built entirely in Italy, are optimal for energy metering, power and power swings in home automation, civil and industrial plants and photovoltaic systems. The compact size also makes it an ideal product for installation in narrow spaces. Each KNX module can be combined with Algodue UEC single- and three-phase counters, and can also be used in the event of product replacements. Algodue Elettronica, thanks to decades of experience in the field of industrial customisation (OEM), also offers versions designed and manufactured based on the customer’s specific needs.

    Website: http://http://www.algodue.com


    Apricum’s KNX power supply IPS640 with alarms, diagnostics and remote reset makes all actual values of current, voltage, telegram traffic and internal temperature available to the KNX bus system. Together with number counters and time counters for operation, alarm, overload, shortcircuit, device start-up and KNX bus reset, the course of operation can be documented in detail. The measurement alarms (after exceeding the threshold value) or operational status alarms (overload, short-circuit) can be configured by the user via ETS and allow fast troubleshooting. In total, there are 36 Group Objects available. The IPS640 requires only two modules on the DIN-rail, less than any other similar device.

    Website: http://www.apricum.com


    The Apricum RF media coupler MECrf connects the RF media to the KNX TP bus system. With the MECrf, it is easily possible to suppress the configuration of devices from the RF subline to the TP main line. Filtering of messages can be temporarily suspended by a single push button action. The push button can be configured by the user and the period of suspension can be set with an ETS parameter. Other KNX lines can thus be accessed even without downloading from the ETS. This simplifies the commissioning of every KNX system. The MECrf supports long frames and enables telegram filtering according to Individual and Group Addresses. In addition, all faulty communication on the KNX bus is accurately indicated by the dual LED display.

    Website: http://www.apricum.com


    Thermal energy calculators are an integral part of modern energy management systems. CALEC® ST II is characterised by its high accuracy and the multi-bus capability. It is recently also available with a KNX interface. It calculates the energy consumption on the basis of parameters, which can be transferred to a central monitoring system. CALEC ST® II is even more versatile thanks to KNX and it additionally offers BACnet MS / TP, M-Bus and interfaces for other technologies.. The regular energy reading can for example be performed with a conventional system and at the same time the energy and temperature values of CALEC® ST II can be integrated into the KNX system.

    Website: http://www.aquametro.com


    VFace is an easy configurable VRV / VRF gateway for KNX projects, supports most of the existing brands and provides end users with full control of all indoor units via KNX or web interface. Easy integration of VRF without any other equipment directly to KNX and simple configuration of all settings via the web interface. It can also be used remotely by web interface to control and monitor indoor units or to create timing scenes for indoor units. Moreover, VFace has a 7" touch screen option that can be used as a central remote controller.

    Website: http://www.astrum.com.tr


    Wherever you need professional media playout solutions to be integrated with effective KNX workflows, AV Stumpfl can offer both fully compatible software and hardware solutions. Using our Avio Manager software toolkit, building automation projects featuring audio visual displays can be easily set up using node point connections. The FHD Player hardware combines high quality and interactive media playout and natively integrates into KNX bus networks. Potential applications range from museums to corporate digital signage. You can maximise efficiency and remove compatibility issues when integrating AV displays by using AV Stumpfl products in this way.

    Website: http://www.avstumpfl.com


    AVE System 44 design in KNX technology. The control device cod.442KNXTC6 has six independent channels and three modules S44. It can be configured with one to six sensitive areas to which three colours can be assigned for optical signalling. It can be personalised with AVE Touch front plates. Available in glass or aluminium versions and in many colour variants, AVE Touch front plates rediscover an aesthetically minimalist design in order to redefine the concept of style: you can manage the lighting and your home by simply touching a surface, since it is coordinated with all the rest of your home automation system.

    Website: http://www.ave.it


  • B

    AUDIO AMP, a powerful amplifier with a power output of 2 x 50 watts, is the perfect supplement for the AUDIO MODULE KNX line. As a DIN rail mounted device, it is ideally suited for discrete and tamper-proof installations. An efficient class D amplifier and the integrated DSP chip (192 kHz / 24 bit sample rate) provide excellent sound quality, while the auto standby feature ensures a particularly low power consumption. With its 3.5 mm phone jack, the AUDIO AMP offers a flexible and convenient input. Volume and mute can additionally be controlled by floating contacts.

    Website: http://www.bab-tec.de


    Luxury-grade building visualisation: The touch panel computer with its gorgeous full HD display combines state-of-the-art technology and architectural design flexibility. The flush-mounted touch panel seamlessly integrates into nearly any surface. Its “Smart Dots”, which are integrated into the high-quality full glass front, allow you to directly access useful functions. With an integrated presence detector, the “Smart Surface” is immediately available as a control and information centre. Its uncompromising selection of components guarantees an undisturbed and noiseless 24 / 7 operation. The “Smart Surface” is available from 13.3" up to 21.5".

    Website: http://www.bab-tec.de


    At ISE 2017, Basalte introduced the Deseo temperature controller, a comprehensive HVAC controller that directly integrates with KNX home automation. Its elegant design and use of top-quality materials enable HVAC control to blend into any interior, thanks to the high-quality finishes such as aluminium, bronze and glass. The internal temperature sensor and thermostat monitor heating, cooling and ventilation in the room. Its unique, user-friendly interface provides simple controls for setpoint, ventilation and modes. Combined with Basalte’s unique multi-touch functionalities, Deseo becomes the one-stop keypad for HVAC and quick lighting control in your room.

    Website: http://www.basalte.be


    Basalte’s Asano multiroom audio amplifies and distributes uncompressed hi-fi music in projects worldwide. Now, Spotify Connect is an integrated service in the S4 music server, the core of the Asano system. As a result, Spotify Premium subscribers can listen to millions of songs in their home: anything they like, wherever they want! This completes Asano’s music services, also including internet radio and other streaming services. Thanks to the direct KNX integration of the S4, no interface is required. Users can control tracks, playlists and volume with their favourite KNX device, whether this is a remote, a switch or a touch screen! You can also use the intuitive Asano Music app for iOS and Android.

    Website: http://www.basalte.be


    The new RGBWL-K (reference DM480440) is a 4-channel controller for controlling RGB, RGBW or any other low voltage (10 – 24 V DC) LED strip modules. It allows each output to be controlled independently to regulate four monochrome channels or all channels simultaneously for RGB and RGBW applications. It is able to select a particular colour using a colour selector and to modify the brightness of the chosen colour or of each channel individually. This device also allows the programming of scenes and sequences and also has an advanced logic unit with eight blocks of operations including logic, comparison and arithmetic operations as well as timer blocks and counters.

    Website: http://www.besknx.com


    hase introduced its new actuator, which maintains the hallmark of the brand: simple, complete, easily programmable and intuitive devices. It is a binary actuator with 22 potential-free relay outputs. As a direct result of the multifunctional programming of its outputs, it provides the ability to work either independently or simultaneously in different modes: binary outputs, blinds, valves or fan coils. Additionally, it has up to eight arithmetic and logical units (ALU) as well as up to eight timers. These features allow the programming of complex logical operations, timings, counters, etc, using external or internal variables. Programming is accomplished through ETS.

    Website: http://www.besknx.com


    The optimum effect of the light is only achieved through professional LED lighting management. BILTON offers control units in three devices and in all standard signal variants. The SXT series is a 1 – 4 channel LED dimmer for constant voltage-powered LED modules, with an integrated power supply. The new control unit provides an output load of 96 W with an input current of 24 V. Each channel can have a maximum load of 4 A. Further advantages are the simple control of scenes and sequences, quick configuration time and the adjustment of the dimming curve. The Bilton LED dimmer SXT is available in the following signal options: KNX, DALI, Switch Dim, DMX, 1 – 10 V Analogue.

    Website: http://www.bilton.at


    Use voice control and query through Siri® for KNX. The realKNX mini server acts as a bridge between a KNX installation and Apple’s iDevices. realKNX enables voice control and powerful automation including geofencing. realKNX requires no configuration. The realKNX mini server will automatically find the KNX proServ gateway, then load the building structure that has been configured in ETS and expose it to the Apple clients. This will take five minutes and requires no interaction. Finally launch the realKNX app – it will automatically sort all KNX functions in the rooms. Siri and HomeKit compatible apps are now ready to use.

    Website: http://www.proknx.com


    In addition to the KNX control by Augmented Reality based on the smartphone camera, RealKNX became a complete voice control centre. One single configuration carried out with an ETS product database now offers voice recognition with Siri (iOS devices such as iPhone, AppleWatch, iPad, Apple TV), Alexa (Amazon Echo, Echo Dot, Echo Show) and our powerful RealKNX Skill and Google Home Assistant. Functions (lights, scenes, HVAC, values, states) are automatically assigned to their rooms and translated to the corresponding function of the voice controller without requiring special knowledge.

    Website: http://www.proknx.com


    KNX universal dimming actuator (RLC, LED, CFL) 2-channel, capable of loads of up to 300 W at 230 V AC on each of the two lines. The dimming curves are configured with ETS by adapting the type of source light used. The front panel has manual controls for the adjustment of the outputs. The most important feature of this new dimmer is the ability to dim the new energy-saving lamps (Type E27). In fact, the dimmer is able to dim small loads from 5 W.

    Website: http://www.blumotix.it


    The main and sub modules for 24 V DC drives include four motor outputs and eight binary inputs per device. The connection to the KNX bus is realised via the main module. Thus each combination is just one KNX participant. Integrated security objects and priority management ensure that the controlled products like blinds, awnings, large louvre blades, roller shutters, windows, light domes, etc. are damage-proof at any time. The speed control during acceleration and braking protects the drives and the blockage detection ensures a risk-free operation. The automatic detection of end positions, the 6-byte “SunControl” object as well as the preconfigured product libraries and movement strategies provide support with fast commissioning.

    Website: http://www.bms-solutions.de


    Why run to the switch when you can carry it with you all the time? With the KNX app, all BMS blind actuators of the MCU-Modular series can be controlled from mobile iOS devices. The app communicates directly with the actuator – no server, no additional module – just a single interface between WLAN and KNX and each user can individually adjust the sun protection to his needs. Contact: www.bms-solutions.de

    Website: http://www.bms-solutions.de


    The new PD2N-KNX is available in three different functional variants: BA (simple requirements), ST (common requirements) und DX (demanding applications). Innovative functions such as short presence, i. e. reduced follow-up time after only a short period of presence or offset via three light zones enable perfect lighting control. Thanks to birectional remote control, the parameters can be read out easily at any time. Due to an internal and external light sensor and an additional brightness object as well as the possibility to connect an external light sensor via infrared, light measurement is optimised.

    Website: http://www.beg.de


    The new PD4N-KNX is available in three different functional variants: for simple requirements, common requirements and demanding applications. Innovative functions such as short presence, i. e. reduced follow-up time after only a short presence of persons, and offset for three light zones enable a perfect light regulation. Thanks to bidirectional remote control, the parameters can be read easily. Thanks to an internal and external light sensor and an additional brightness object and furthermore the possibility to connect an external light sensor via infrared, light measurement is optimised.

    Website: http://www.beg.de


    24 / 16 / 8 / 4-fold KNX binary output for switching and control of loads or 12 / 8 / 4 / 2-fold KNX actuator for the control of drives for motorised blinds, shutters or curtains. To be used in KNX installations for home and building automation. BSmart KNX products make it possible to achieve the most convenient solutions for projects and also increase the comfort of living spaces while decreasing energy costs.

    Website: http://www.bsmart-knx.com


    The new Busch-Presence detector Corridor KNX is especially designed for use in hallways and long corridors. The detector reaches a detection range of up to 30 metres. This single device covers areas which previously required several detectors to be used. Its extra-flat design blends seamlessly into the existing room design. With the integrated room temperature controller, the premium version of the Busch-Presence detector Corridor KNX can additionally regulate heating and cooling. Moreover, constant lighting control as well as two power off stages can be implemented. The detector can also be set to programming mode via the infrared remote control.

    Website: http://www.busch-jaeger.com


    Although they have an extremely flat design, the new Busch-Jaeger KNX presence and movement detectors are outstanding as regards their detection quality and enormous range. Their simple installation and start-up are extra advantages – e.g. at high installation heights the Premium and Sky versions can be switched to programming mode using a standard, Busch-Jaeger, infrared, remote control. Premium models are fitted with a temperature sensor and can also act as room-temperature controllers. The new ETS applications also include the option for switching the light off in two stages.

    Website: http://www.busch-jaeger.com


    The Busch-SmartTouch combines the functionality of smart home automation with the comfort of modern door communication. And it does this with an extremely slim, elegant device with a high-quality 7" touch panel whose capacitive glass surface makes operation possible with total ease. Fully intuitive, as with a smartphone – with the tip of the finger and swiping gestures. Furthermore the Busch-SmartTouch® supports the DCA function of the ETS5 protocol for easier graphic programming.

    Website: http://www.busch-jaeger.com


  • C

    The Maestro-Server-4 is a very cost effective, extremely powerful and flexible Control Center for the KNX system and an ultimate gateway between KNX, IoT and other systems as it controls them using RS232,IP and IR. The MS4 is a web and Smart-Phone server utilizing the same unmatched, user friendly, Maestro GUI, simplifying control of home and building systems. It provides all essential functions: schedule and macro manager, powerful function blocks controller, event logger and a KNXnet/IP gateway. The MS4 enables two-way control of external systems such as multimedia and VRV A/C systems. The Maestro script language modules enable writing of complex protocols and energy management algorithms.

    Website: http://www.cdinnovation.com


    The Belgian pioneer in design switches launched their famous “NINA” collection on KNX so you can now easily integrate this KNX design switch into your KNX project. The cover plate, made out of aluminium, is available in more than 14 high-end finishes. Each lever is available in chrome, gold, antique silver and antique bronze and has a separate function for upward and downward movement. Other possibilities: short and long keystroke, night and day LED indicators, brightness adaptability, dimming, blind / shutter control, lightscenes etc. This collection is available with or without control LED and can be equipped with an optional temperature and humidity sensor. It is available with up to two levers on a single cover plate and is to be installed in universal built-in boxes.

    Website: http://www.cjcsystems.com


    ComfortClick Jigsaw is the new server for controlling KNX-based smart homes. Jigsaw now comes with an integrated KNX interface and bOS visualisation software, which enables you to control all devices in your smart building from a single app on any mobile device. In addition to KNX, Jigsaw also supports: Z-Wave, Modbus, DSC alarm, Sonos, IP cameras, Kodi, Global Caché, IRTrans, Philips Hue, SMA devices, TCP / IP devices and IP intercoms. bOS Configurator enables you to design your own custom GUI, logical operations, scenes and schedules. Control and monitor your smart home with free bOS Client apps for iOS, Android and Windows or Amazon Echo.

    Website: http://www.comfortclick.com


  • D

    Now with two HDMI and USB ports. A monitoring system that simplifies everything: The new Minor generation from Dialogic Systems has two HMDI and USB ports, so two PCs can be connected and controlled simultaneously. The KNX visualisation for building automation can thus be run on one computer, while the other PC monitors security technology, for instance. To this end, there is a 3 mm thick, touch-operated, real glass panel and a sound card, plus loudspeakers and a microphone. A voice performance module and a 5 MP camera are available as options too. Get in touch with the future!

    Website: http://www.home-cockpit.eu


    New Laüka range of touch-sensitive glass pushbuttons, allowing control of lighting and blinds. Control: The Laüka series is a range of switches designed to provide full control to the user over the lighting, the blinds and, in turn, the ability to memorise scenes to generate the desired ambience. Versatility: Created to meet the diverse needs of both professional and private types of installations: home, restaurants, hotels, etc. Integration: Perfect integration in all types of interiors. Functionality: Formed by 4 / 8 buttons where direct functions can be assigned to control the lighting, move the blinds or create personalised scenes. It incorporates temperature sensors and a configurable thermostat.

    Website: http://www.dinuy.com


    The solution for your stable, secure and controlled network. DIVUS HEARTBEAT is a hardware software solution, composed of a PoE+ enabled managed switch and an innovative manager for KNX CONTROL. Integrated into the network, it creates a secure area for building automation, the “DIVUS SECURE NET”. A protected intranet, in which the devices interact perfectly, but can not be attacked from the outside. Additional features such as status scan, real-time monitoring, system diagnostics and troubleshooting provide support through automatically generated system reports making it to an indispensable innovation for your building network!

    Website: http://www.divus.eu


    Securing smart homes is becoming more and more important. HEARTBEAT guarantees a stable and secure connection of the DIVUS devices in a protected area of the network. You have the network and all connected components fully under control. Comprehensive protection and full security can be guaranteed! Important components for building automation, which belong to a secured building network, can be connected to DIVUS HEARTBEAT and be controlled. Security gaps are closed, the network is stable and the auto configuration makes it easier to handle the network with this complexity.

    Website: http://www.divus.eu


  • E

    XD100 KNX detector with a compact and unobtrusive design is ideal for interior rooms such as medium- to large-sized offices, corridors, classrooms, car parks, conference and meeting rooms. The detector is available in two models; PD100 presence detector, MD100 motion detector. Both models have flush-mounted and surface-mounted versions. XD100 has three independent channels; presence, lighting (up to four lighting groups) and HVAC. The constant lighting function can be applied with two different setpoints related to the presence information (e. g. during presence: 500 lux, during absence: 100 lux). The lighting can be set to different brightness levels or scenes can be recalled based on motion detection thanks to the corridor function. XD100 KNX detector can either be used as a standalone device or master-slave device (parallel operation with other XD100s) according to the requirements.

    Website: http://www.eaeaydinlatma.com


    Oria premium switch and thermostat series creates a natural harmony and adds value to your interior designs with an elegant look and sophisticated technology. Combined with the KNX system, use of a single Oria switch would provide you with the means to activate light scenes, control blinds and set a comfortable temperature. Oria series devices, which combine the familiar push button feeling with the latest technology, are available in anthracite, ivory and cloud grey.

    Website: http://www.eaeaydinlatma.com


    DM04A01KNX is a KNX universal power dimmer with four channels x 300 W, automatic identification of the load type and with configurable parameters to optimise the control of different lamps such as LED, incandescent and halogen, CFL dimmable lights and low voltage lamps with electronic or ferromagnetic transformer.

    Website: http://www.eelectron.com


    The GlassPad KNX is available in two colors (white and black). The product comes in four different versions: three and six channels for three modules in-wall box or four and eight channels for four modules in-wall box. Every product of the range has LED signaling for each channel and can be installed vertically or horizontally. Pressing the switch can be long or short and every GlassPad can manage scenarios or sequences. The customization of the glass color, texts and icons for residential and commercial environments is available on demand. The product is fully programmable with ETS.

    Website: http://www.eelectron.com


    CR/CH70A02KNX is a KNX® room temperature controller with seven capacitive push buttons that can be configured to manage on / off controls, dimming, shutter and blind control, scene management, sequences of three objects, etc. The device also includes a 2-stage room temperature controller with integrated PI to control heating and cooling equipment, valves, 2- and 4-pipe fan coils etc. Embedded temperature sensor included and a rear connector (2 poles) configurable as digital or analogue input. Using digital inputs, window contacts, door contacts or presence detectors, outputs can be detected to implement specific embedded logic functions.

    Website: http://www.eelectron.com


    By integrating ekey fingerprint access control systems via a KNX interface, the ultimate benefit will be added to your installation: personalised building control using biometric data that guarantees unique identification. Save up to 99 fingerprints within one installation and use up to ten ekey events to program customised scenarios through the ETS. Apart from these ten standard events, there is a dedicated event available for unknown fingerprints / users. A security event can be triggered automatically after a certain number of rejections were recognised by the ekey finger scanner within a configurable time period.

    Website: http://www.ekey.net


    The KNX B8-TH is a compact interface that fits into any switch box. Via eight binary inputs, for example, contacts for windows or push buttons for dimming, switching or up / down movement are integrated into the KNX system. Wall sensors for 55 mm switch series and a feed probe connected to special inputs provide values for the internal ambient and ventilation control of the interface. The room temperature and air humidity are thus recorded. If required, the surface temperature of a heating / cooling system is also measured and the dew point is monitored.

    Website: http://www.elsner-elektronik.de


    Remo KNX communicates according to the KNX RF standard and can be used for various functions in the KNX system. The wireless hand-held transmitter which was awarded the Red Dot 2017 has a flat and handy shape. The touch display is activated automatically when the hand-held transmitter is picked up (vibration recognition). The well-arranged screen surface provides an overview for the operation of up to 32 radio components. For example, light is dimmed or shading elements are positioned with a touch of the finger. After the setup in ETS, the user can change the names for the radio channels directly in the display. The individual adaptation of the names is thus possible at any time and independently of the integrator.

    Website: http://www.elsner-elektronik.de


    Cloud services like Amazon Echo, Apple HomeKit and others, can now speak to KNX. Amazon provides a voice interface to combine home control, music control, home shopping, news, traffic and weather updates and more. Voice-assisted living has never been so easy to implement with new LogicMachine5. LogicMachine5 controls and interconnects all Amazon Echo and Apple devices and allows you to control your installation via voice commands.

    Website: http://www.logicmachine.net


    KNX to CAN gateway provides 1:1 group communication mapping between CAN / FT and KNX without any manual configuration. The device fully supports common KNX Datapoint Types, auto-addressing and import of KNX project files. CAN bus is used in environments where the highest reliability is a must: aerospace, automotive and railway. CAN / FT is an international standard (ISO 11898-3:2006).

    Website: http://www.logicmachine.net


    Keypads with metal and glass surface options are now available. HTP95-PB series push-buttons have large backlit buttons. These buttons can be laser engraved to form text and / or icons for ease of use. EMT Controls with expertise and attractive prices in a glass touch panel series has now been expanded with metal and glass keypads, using the same installation mechanism that supports many backbox types.

    Website: http://www.emtcontrols.com


    Enertex introduces a new variant of its SmartMeter with an integrated clock. The variant includes all the features of the basic device: bidirectional energy meter, measurement of current, voltage, active power, reactive power, power factor, THD, harmonics, zero system current. Due to its internal clock, the SmartMeter can even record all the values with a correct time stamp, if no KNX bus is connected. Therefore the device can also be used as a standalone data logger to record the power supply quality and energy consumption or generation, without the need for any software configuration. In this mode, all the measurement values are recorded at each minute on an SD card in the CSV text format.

    Website: http://www.enertex.de


    MeTa® KNX is a KNX touch sensor and room controller with electronic labels and mechanical rockers. Each rocker can be programmed for use of four or eight (left / right) KNX functions. The function is selected with the menu button at the lower end. 32 KNX functions can be implemented. Room thermostat, temperature measurement, humidity measurement, an external binary input for potential-free contacts, feedback and operating symbols are integrated. The high-quality housing made of milled aluminum is available in “brushed”, “black anodised” or “white powder coated” versions.

    Website: http://www.enertex.de


    Panno S, the next generation “all in one” product, is the world’s first home automation system control panel from enno electronics that integrates multiple protocols and is compatible with KNX bus technology, EnOcean wireless technology, Apple HomeKit and RS485 standards. Aircraft-grade aluminum metal with vibration feedback, adaptive 320*320 AMOLED backlit LED display, 8 zone 0 – 10 V dimming control, Apple Siri voice control, iOS App control and proximity sensor. Without additional modules or switches installed, you can easily set up and control the lights, air conditioning and HVAC ventilation system in your home. Numerous functions are integrated that allow most of the demands to be satisfied.

    Website: http://www.enno.com


    ESYLUX GMBH presents the first KNX-compatible DALI lighting system in the form of a new design of the NOVA system solution. A KNX module directly integrated in the master lights permits seamless integration in KNX building automation systems and means that there is no need to install a separate gateway. This allows the master lights – and in turn, the entire system – to be conveniently controlled and read out from a central control point. As you would expect, the master lights, together with the slave lights, provide constant lighting control based on the amount of natural light. At higher configuration levels, the lights emit biologically effective lighting using ESYLUX’s SymbiLogic technology.

    Website: http://www.esylux.com


    EXOR International eSMART Series are advanced KNX HMI devices for a flexible and lightweight solution in building automation. The products have been designed for budget home control. The support of KNX IP and other protocols with JMobile efficient gateway capability is a bonus for integration. The compact mechanical size results in an easier installation in a home or building environment. With the availability of OPC UA server and client, the product is IoT ready. Ready for wall mounting. Display size 4.3", 7" and 10.1".

    Website: http://www.exorint.net


  • F

    The new movement sensor is specifically designed to sense micro movements and is the ideal solution for managing of lighting systems in offices, work environments in general, and schools. The type 18.5K movement and presence sensor comes with two software outputs, one of which is controlled according to the light measured by the internal sensor, and is also appropriate for particular types of systems where it is necessary to control both the lighting and the heating / air conditioning. There is also a third software output that sends only movement information to the KNX bus: thanks to specific software inputs, sensors can be networked in master / slave configurations.

    Website: http://www.findernet.com


  • G

    The MAT uses eleven RGB LEDs and an acoustic signal to process physical variables and display critical states. The states of valves, blinds etc. (1 byte) are monitored as well as 2-byte and 4-byte objects with threshold value and hysteresis temperatures, volumes, pressure and voltages. The eleven inputs can be linked internally with the integrated buzzer with the help of the internal logic. The buzzer reacts to changes in the alarm state. It is acknowledged with the button. The change is visible through the LED ring and sent on the KNX. Several MATs can be cascaded via the bus and unnecessary acknowledgement buttons can be used as normal bus buttons.

    Website: http://www.eib-tab.de


    Fully realised with plate glass, commands, touch type, circular slider, rear projection display and RGB LED, THERMO ICE KNX allows you to manage heating / cooling systems in a 2- or 4-way system, using algorithms of two-point control, proportional-integral control and fan coil. If combined with a humidity outdoor sensor, it enables a system for humidification / dehumidification to be managed. It includes temperature and proximity sensors as well as two inputs for potential-free contacts (window contact, temperature sensor NTC external, etc.). Available in white, black and titanium, it can be implemented either in KNX systems or KNX Easy systems. Suitable for round, square and rectangular boxes.

    Website: http://www.gewiss.com


    KNX push button panel with four independent channels, with interchangeable button keys and customisable illuminated symbols for a quick and easy identification of the functions controlled by the button. Each channel is associated with a RGB LED for night-time locating or status display for the commanded load. The panel can manage the switching of loads on / off, the control of roller shutters / venetian blinds, dimmers, memorisation and activation of scenarios. The push button, available in KNX and KNX Easy versions, is a 2-module Chorus device and is suitable for mounting in round / square and rectangular boxes. It is available in white, black and titanium and fits all the plates in the Chorus range.

    Website: http://www.gewiss.com


    A natural, energy-efficient supply of fresh air whenever needed on demand and under control at all times: the new GEZE IQ box KNX interface module allows GEZE IQ window drives to be directly incorporated in KNX building systems, thus enabling a dialogue with other KNX-enabled components. In contrast to simple switch contacts, the IQ box KNX uses the intelligence of the window drives and after performing a “command”, reports the mode of a window to the KNX building system or building management system. More detailed window information is also made available via the module.

    Website: http://www.geze.com


    The Gira X1 is the simple and cost-efficient way to achieve an intelligent home with a KNX system. It can do all the things that are necessary and practical in a single-family home: switching lights on and off, activating light scenes, controlling blinds, setting a comfortable temperature and visualising the various functions – inside the building or remotely via the app. The X1 can be rapidly and easily installed on a DIN-rail and quickly parameterised by an electrician. Functions such as device-less logic simulation and the ability to set up or maintain the project remotely via Internet and VPN accelerate the start-up process and reduce costs for the customer.

    Website: http://www.gira.de


    Heating and cooling using KNX: The Gira 6-gang heating actuator with integrated controller facilitates the integration of heating and cooling systems into intelligent building technology with KNX. The heating actuator controls up to six heating or cooling circuits in the building. 230 V or 24 V thermal valve drives can be used as drives. Integrated room temperature controllers in the heating actuator mean that separate room temperature controllers are not needed in the respective rooms. In short: where a Gira KNX touch sensor 3 Plus with room temperature controller was previously needed, the cheaper touch sensor 3 Komfort can now be used.

    Website: http://www.gira.de


    The dimmer with LED constant current can drive the LED directly, has four independent channels and two independent outputs. The output current of each channel can be set via the linked switch button and can produce 350 mA / 700 mA or 700 mA / 1 A. When the output current exceeds the rated current of the load, the load will probably burn out and cannot use a 700 mA output to drive 350 mA LED. In the case of a full load, if all LED are 350 mA, the dimmer can output eight fold, but if some LED are 700 mA or 1 A, it cannot output eight fold in certain configurations and the LED cannot reach the expected brightness value.

    Website: http://www.geigcl.com


    The new GreenControls 12-channel switching actuator is designed for installation on DIN 35 mm and programming with ETS to perform different switching parameters. This switching actuator can switch 12 independent electrical AC loads or three-phase loads with 16 A maximal load. Each channel relay can be switched ON or OFF manually without connection to electricity. The switching actuator also comes with four and eight channels. Model: GC04SA003

    Website: http://https://www.seikousystec.com


    The push button can be used as separate rockers or as a pair; short / long operation for different KNX function; customisable template (middle part) for printing of function titles as well as icons; built-in temperature sensor; RGB status indication; brightness adjustment; integrated bus coupling unit, all in one piece; matt, and shiny finish available.

    Website: http://www.gzrishun.com


  • H

    Hager’s KNX pulse gateways TXE771 and TXE773 with one or three channels can be connected to any mechanical electricity, water, gas or heat meter using the S0 interface in accordance with DIN 43864. The devices convert the analogue pulse values into digital KNX telegrams and transmit them at intervals specified between one minute and 24 hours to e. g. a KNX server.The programming of the device can be carried out using either the ETS or the easy configuration tool. Thanks to its waterproof IP44 housing and an operating temperature ranging from -20°C to +55°C, assembly is also possible in damp locations or outside.

    Website: http://www.hager.com


    Hager IoT controller (TJA560) is a gateway that enhances your KNX electrical installation by making it compatible with tens of IoTs (IoT: Internet of Things). With the IoT Controller, you can use multiple applications such as controlling your Sonos Home Sound System, expanding the lighting with Philips Hue, integrating voice control with Amazon Echo (Alexa) or an IFTTT compatible device. List of compatible products / services: Amazon Echo (Alexa), Sonos, Philips Hue, Netatmo weather station, IFTTT (Cloud Service).

    Website: http://www.hager.com


    The award-winning design of the Berker Q.7 switch range is pleasing to the eye, using materials such as aluminium, stainless steel, glass, slate or concrete and translucent frames that make the switches appear to float on the wall. Moreover, the technology is also impressive, because the Berker Q.7 fits a broad range of KNX: the range runs from buttons and modern touch sensors, to particularly convenient touch sensors with displays for controlling lighting, heating, shutters and blinds, to new room controls with highly contrasting black displays.

    Website: http://www.hager.com


    The M/4.20.1, M/8.20.1, M/12.20.1 and M/16.20.1 expansion switch actuators all feature current detection technology and fully comply with EU safety standards as well as with KNX. Capable of single channel current reporting, total current reporting and dual current threshold control, the HDL range of channel switching expansion actuators with current detection precisely combine form and function into a singularly unique package. For effective current detection three modes are available, these being automatic mode, trigger mode and comparison mode. The current report generated by the modules supports 2-byte and 4-byte floating point type data types.

    Website: http://www.hdlautomation.com


    The air quality sensor (AQS) GS 41.00 KNX offers detection of the air quality (CO2 concentration compensated by atmospheric pressure, temperature, relative humidity) as well as air quality control functions. The sensors are commonly found in office buildings, schools and private homes. Due to wall-mounted housing, ideal sensor positioning is possible. In addition, the two-part device setup guarantees a simple installation. Manual adjustment of the setpoint temperature (range: +/- 3°C) is available via the integrated touch panel. Various options and parameters within the ETS application offer adaption to multiple solutions.

    Website: http://www.hugo-mueller.de


    The new air quality sensors (AQS) GS 40.10 KNX / GS 41.10 KNX offer detection of air quality (atmospheric pressure compensated CO2 concentration, temperature, relative humidity), as well as air quality control functions (via integrated PI / step controllers). Up to five integrated binary / analogue inputs allow you to connect external push buttons, 0 – 10 V / 1 – 10 V signals as well as one external temperature sensor. Manual adjustment of setpoint temperature (range: +/- 3°C) is available in the GS 41.10 KNX via an integrated touch panel. The compact wall-mounted housing ensures variable positioning of the sensor. Various options and parameters within the ETS application offer adaptation to multiple solutions.

    Website: http://www.hugo-mueller.de


  • I

    Iddero presents the new MURA IP door station: An elegant, robust door intercom unit that provides full colour video and high-quality digital audio over IP, allowing users to talk to the visitor at their door from a dedicated indoor monitor, a standard SIP (VoIP) phone, or a smartphone or tablet. Together with Iddero’s HCx-KNX touch panels, the MURA IP door station provides a solution that fully integrates IP door communications into any KNX installation. The door phone events function makes it possible to trigger actions – such as opening the door – with KNX telegrams, or to receive KNX notifications in response to events such as the reception of an incoming call. Available in multiple configurations.

    Website: http://www.iddero.com


    HCx-KNX touch panels and the Iddero Home Server are now fully compatible with the By-me product range from Vimar. Projects generated with Vimar’s EasyTool Professional software can be easily imported into the Iddero configuration tool. This makes it straightforward to use the Iddero HCx-KNX touch panels or the Iddero Home Server for visualisation and control of a mixed installation containing both KNX devices and Vimar By-me products, as well as supported IP door stations and cameras. This functionality is available starting with firmware/software version 3.3, at no additional cost.

    Website: http://www.iddero.com


    The professional hybrid solution for all smart home situations: iHaus is a unique platform to link and control KNX automated devices with all other intelligent IP-based smart home devices, no matter which manufacturer, brand or system they work with. In combination with a JUNG KNX IP router or gateway, the iHaus app enables commands between KNX and other systems such as Apple HomeKit, Ikea Trådfri, Home Connect, SONOS, Philips Hue or Amazon Echo, which can be set and called up individually – even by voice command to assistant Alexa or via touch screen when you are away from home. An additional hub or gateway is not necessary as iHaus uses iOS or Android smart mobile devices as a 24/7 server solution.

    Website: http://www.ihaus.de


    IntesisBox® adds to its portfolio the DK-RC-KNX-1i gateway, expanding its range of products for the integration of Daikin’s air conditioning products. The new gateway, like the current DK-RC-KNX-1, allows you to control and monitor all the air conditioner’s operating parameters from KNX in an entirely bi-directional way. The main novelty is that the DK-RC-KNX-1i incorporates four binary inputs that will allow KNX integrators to integrate different external devices into their home automation projects. These binary inputs can develop four standard KNX functions such as switching, regulation, shutter control and value sending. In addition, they enable three internal functions to be executed from the own gateway.

    Website: http://www.intesis.com


    IntesisBox® presents an updated gateway PA-AW2-KNX-1 for the control of Aquarea H, the new air to water system series of Panasonic. The IntesisBox® AW gateways series is the only solution in the market that integrates air to water systems into KNX. The connection is carried out directly on the hydro unit using the supplied cable making the installation extremely simple and quick. The gateway allows the control of the two zones available in Aquarea H and the hot water tank. The zone temperature can be set as the ambient temperature or otherwise as the water flow temperature. Furthermore, a high number of signals can be monitored by using different KNX objects. The remarkable feature is the monitoring of the system energy consumption and alarms.

    Website: http://www.intesis.com


    With Power Block, IPAS presents for the first time 16 AC load switch actuators with 8 and 16 outputs in a DIN-rail enclosure. The Power Block actuator series stands out due to its compact format and the extremely powerful application. In addition to numerous parameters defining individual functions or switch outputs, alarm, time, scene and regulator functions can also be activated in the application. These can be used independently of the configuration of the outputs. The switch outputs can be configured individually as binary or shutter outputs.

    Website: http://www.ipas-products.com


    It’s a solution for the fast setup of KNX projects with no programming. To control equipment, download i3 lite from the Apple Store or Google Play and import your ETS project or configure it via Weinzierl 771 / 772 / 777. Next, create the floors, rooms and add control modules to different zones. A graphic interface is created automatically. The project is ready to use. You can create routines and schedules of equipment. If necessary, your customers can add A / V and IoT gadgets to the project. iRidium lite can be used with the iRidium server to collect, store and process data, compile trends, run routines and logic functions 24 / 7. iRidium lite enables the control of KNX equipment combined with other automation systems, A / V and IoT gadgets.

    Website: http://www.iridiummobile.net


    offers three tools to enable voice control in KNX installations. Depending on your customer’s choice, you can choose one of the voice control options: iRidium gate for Homekit®; Amazon Echo® module or Google Home® module. Add voice control to your installation in a matter of minutes. There is no need to make any changes in an automation project. Your customer can control the smart home with his voice via the Home app, Amazon Alexa app or Google Home app. iRidium gate for Homekit, Amazon Echo, Google Home allows you to integrate in one project the voice control from KNX and other professional automation systems, as well as IoT devices supported by iRidium. iRidium gate for Homekit® works only on Raspberry Pi 3.

    Website: http://www.iridiummobile.net


    The new “Remote Access” is the revised version of the “ise smart connect KNX Secure”. The easy-to-install secure remote access is not only a significant assistance for the electrical installer and a cost reduction for parameterisation and maintenance. Customers also benefit from the significant advantages of remote access. In addition to access control and access to cameras and web-based visualisations, the gateway has been extended by a notification system. Now messages can be sent directly via individual rules from the KNX as an email (with attachment), SMS or voice call.

    Website: http://www.ise.de


    KNbriX from ITK Engineering links smart home solutions with the KNX bus and works to achieve a fast integration of components and functions. The KNX Stack is available in two editions: the basic version serves as a gateway solution. KNbriX Plus is a single chip solution for both application and stack. The user-friendly form of the API allows for smooth communication between the client application and the KNX Stack from ITK. Both make up the perfect core package for development of KNX devices from small to large quantities within very short development timeframes.

    Website: http://www.itk-engineering.de


  • L

    Legrand recently announced KNX compatibility for its Nuvo Player Portfolio home audio system. Created by audiophiles and designed for professional installation, Player Portfolio streams audio over Wi-Fi and wired networks to up to 16 zones. The Player Portfolio line covers several models of players, including a new TV sound bar and tabletop speaker, as well as 1RU multi-zone amplifiers. Contact: www.legrand.us

    Website: http://www.legrandelectric.com


    Light control offers all the safety and durability advantages of a capacitive keyboard, since there is no mechanical wear of any kind, and ease of use is improved with the introduction of luminous and acoustic feedback, made possible by the ability to program the backlighting and the buzzer based on any event notified on the bus. The devices are also equipped with a proximity sensor through which the keyboard is activated, the wall-mounted backlighting is turned on to make the keyboard visible or an actual KNX command is generated. LC-GL offers the complete KNX command set needed to control any type of device: on / off commands, light dimming, window actions and transmission of scenarios. Printed icons / names on paper that slides inside the back of the glass.

    Website: http://www.lightcontrol-knx.com


  • M

    The five second installation: This product offers a fast installation with a very discrete and well-designed appearance. It is one product out of an identical family. If you know one product, you can handle all installation situations. The product family offers spring clips, flush mounting, surface mounting IP20 to IP55. Functionality focused on lighting control and presence detection. To facilitate the commissioning, the functionality is optimised for on / off or daylight control with a wide variety of applications such as manual override, standby light, presence detection, lightscenes and run time configuration of time and lux value.

    Website: http://www.zublin.ch


    The Swiss Garde 360 Präsenz KNX / KLR offers a fast installation with a very discreet and well-designed visible part. It is one product out of an identical family. You know one product, you can handle all installation situations. The product family offers spring clips, flush mounting and surface mounting IP20 to IP55. Functionality focused on light control and presence detection. To ease the commissioning, the functionality is optimised for on / off or daylight control with a wide variety of applications such as manual override, standby lighting, presence detection, lighting scenarios and runtime configuration of time and lux values. Ideal for KNX applications in offices, classrooms, meeting rooms, etc.

    Website: http://www.zublin.ch


    The new series of MDT Shutter Actuators has been enhanced with extensive functions. These functions are: Integrated logical functions for window contacts (open / tilt) with practical ventilation function; automatic sun protection / slat guidance with sun protection calculation; plain text diagnosis with 14 byte Group Object; enhanced block functions. Each channel can be parameterised individually. Status response, block functions, central switch functions and functions for calibrating and positioning can be selected. It is possible to create eight scenes per channel and the behaviour in event of bus voltage failure or recovery is adjustable.

    Website: http://www.mdt.de


    The new generation of object servers VisuControl Easy for controlling building functions has been comprehensively extended. It includes: The VisuControl app for iOS is compatible with the iPhone and the iPad, and includes iPhone and iPad, support for four object server / locations, up to four IP cameras per object server / location, an integrated VPN support, an email function for status /notifications, visualisation and control of up to 120 functions, automatic generation of the graphical user interface, individual division into rooms, zones or groups, usable as an IP interface for programming the bus system, a time server function and power supply from the KNX bus.

    Website: http://www.mdt.de


  • N

    For KNX beginners, the parameterisation of KNX devices may present a hurdle. Therefore, Nautibus has assembled sets of pre-configured devices. Device kits contain XML files with all the necessary parameter settings. The standard actuators (switching, dimming, heating, blinds) as well as touch sensors and room temperature controllers are available. The device kit can be downloaded free of charge from the Nautibus website and copied to the EiPlan Device directory. Then projects can be created without the user having to go into the details of the device parameters. A kit with MDT devices is available. Other manufacturers will follow.

    Website: http://www.nautibus.de


    The XLogic Editor is a graphical editor for implementing logics within the NETx BMS Server. Via these logics new control functions can be added and existing data can be extended. Following functions are available: • reading and writing of data points • performing of mathematical operations • sending e-mails • writing of logging information • accessing the current status of the server • invoking LUA functions The user gets a number of pre-defined functional blocks provided, which cover various applications. In the latest version of the NETx BMS Server the XLogic Editor is available without extra charge.

    Website: http://www.netxautomation.com


    With the NETx BMS visualisation, the further development of NETx Voyager visualisation will be launched in 2017. The NETx BMS visualisation is part of the NETx BMS solution and impresses with numerous new features, such as configurable pages / groups and objects with variables, freely scalable view / pages, new button mode for XLogic functions and long / short click or secure server client communication thanks to TLS. Multiple pages and screens are also possible with the new visualisation. In addition, the user is free to choose between PC or web-based visualisation.

    Website: http://www.netxautomation.com


    To make the management the KNX /DALI gateways easier, the NETx BMS Server provides a new module – LaMPS. Its main goal is to provide an interface to initiate DALI tests independent of the KNX / DALI gateway vendor used. The most important features of LaMPS are: Generic interface to initiate DALI tests and show test results, support for DALI emergency lighting including emergency tests, vendor-independent representation of DALI gateways and devices, data and commands that are all available as normal data points (server items), and can be used in any client (e. g. visualisation) and reporting tool to generate test reports

    Website: http://www.netxautomation.com


  • O

    ON SEMICONDUCTOR has introduced three new KNX controllers: NCN5121 and NCN5130 contain the complete KNX PHY and MAC layers, while NCN5110 is an analogue-only bit transceiver. New features include a fixed 3.3 V and a programmable 1.2 – 21 V DC-DC controller, an analogue signal monitoring output, the option to work with one crystal in the application, ex-cellent efficiency by a proprietary energy recovery method. The minimum bus coupler capacitor is reduced to 27µF. NCN5130 DC-DC controllers can draw 100 mA; the total allowable bus current is increased to 40 mA. All parts come in 6 x 6 QFN-40 pin packages and have a junction temperature range of -40 to 125°. Evaluation boards with user manuals and documentation are available.

    Website: http://www.onsemi.com


  • P

    The TFT is connected to the bus via the KNX connection terminals and need a 30 V DC additional supply voltage to assign the Individual Address and configure the software parameter settings and to update the data directly through an SD card. The TFT functions are summarised as follows: 1. capacitive touch screen, TFT colour display; 2. switching, scenes, dimming, curtain control, intelligent scene control and other control functions 3. time and date display 4. screensaver options: clock, electronic photo album, gradient black or do not use; 5. configuration of the database through the PC software and updating data directly via an SD card and 6. customising the setting of the main interfaces

    Website: http://www.prolitecontrols.com


    Audiofy, the powerful, integrated, multiroom professional audio system now includes ThinKnx supervision functionalities. Just with a dedicated plug-in, you can now have complete control of KNX plants and of all the integrated devices even from other technologies. like every ThinKnx server. Controlled by a complete set of native apps, Audiofy streams music content from internal players (which can play all the most diffused digital audio format from DLNA and UPnP Media server, Spotify, AirPlay etc.) or from analogue stereo inputs towards up to 16 rooms, allowing the end user to manage the routing of audio sources directly from his smartphone / tablet or KNX.

    Website: http://www.thinknx.com


    Thinknx is introducing its new Thinknx Portal, a cloud service dedicated to system integrators and users with multiple installations such as multi-site point of sales system, a cluster of villas or several branches with the same headquarters. It enables all the installed servers to be connected virtually regardless of their physical position and for them to be controlled with a centralised Thinknx user interface. Each user also has access to a customisable web page that groups data from all enabled installations into charts and reports, and that allows the user to perform the same actions on all selected servers.

    Website: http://www.thinknx.com


  • R

    The KNX Edge is a modern, secure interface between the KNX network and the rest of the world. At its core, it supports the KNXnet/IP protocol, with up to 100 concurrent tunnelling connections. Secure end-to-end remote access (including programming with the ETS) is included with the KNX Anywhere cloud service. Individual connections can be configured via the firewall service. Also included: KNXnet/IP secure. Web ready (management app, web services). Group object data cache. Configured for guaranteed automatic security updates (manual updates possible).

    Website: http://http://redfish.com.au


    The KNX LED dimmer 80120 is used for 1 – 4 colour 24 V DC LED lighting strips and has an integrated power supply for up to 100 W. The intelligent load identification system distributes the total channel output depending on the occupancy. With the extensive application file, various types of regulation and switching behaviour such as relative / absolute dimming, soft dimming function, 60 scenes, six colour sequences and colour circle function are possible. The device also has features and safety elements like reset function, short circuit / overvoltage protection and overtemperature protection. Due to its compact design, it is suitable for a variety of installation situations.

    Website: http://www.rutec.de


  • S

    The new ekinex® EK-ED2-TP pushbuttons are KNX devices for switching loads, dimming lighting devices, controlling shutters or other programmable functions. Thanks to the integrated temperature sensor, the device can be configured to work also as a room temperature controller. The push buttons can be completed with square or rectangular rockers; in addition to plastic and aluminum, Fenix NTM® is now available – an innovative nanotech material with outstanding features. Two LED (blue / green or white / red) for each channel are programmable as status feedback or orientation light. The devices are designed for wall installation in a flush mounting box and are equipped with an integrated KNX bus communication module.

    Website: http://www.ekinex.com


    delégo is the new control system by ekinex that allows you to control and monitor a KNX home automation system with a mobile device equipped with an Apple iOS or Android operating system. The system is based on a dedicated PC with an Ethernet port connected to the user’s local area network (LAN) and a USB dongle containing the activation system. The graphic interface is simple and intuitive and the app allows the user to control lights, temperatures, actuators, audio / video devices and much more with a simple touch from any place reached by a wi-fi connection, as well as remotely through a web connection. The immediate integration with the ekinex® devices is enriched by the full compatibility with any device based on the KNX open standard.

    Website: http://www.ekinex.com


    The U.motion touch panels put an elegant frame around the visualisation. The ultra-slim Android-based 7 inch touch panel is now powered with Android 4.2. It is compatible with many apps on the market and can be used in combination with U.motion servers, homeLYnk, spaceLYnk or InSideControl, through dedicated apps. This complete solution is especially interesting with the new firmware of homeLYnk and spaceLYnk. Now the end user can use the same interface at home and anywhere in the world using smartphones, tablets and touch screens.

    Website: http://http://schielecn.com


    “eConfigure KNX Expert” is a new ETS App from Schneider Electric for a seamless graphical design and configuration of KNX home and building automation systems. This tool is perfect for KNX Partners who want to gain time and improve the quality of their repetitive KNX projects. The design of the KNX project is carried out graphically on the floor plans, using drag-and-drop and easy links between devices and loads. All the DIN-rail devices are then automatically calculated and generated by the tool including homeLYnk and spaceLYnk controllers. This version includes all the main products from the Schneider Electric KNX catalogue, including a special tool for creating and integrating additional KNX devices.

    Website: http://www.lk.dk


    New: Merten KNX/DALI-Gateway MEG6725-0001 supports DT8 tunable white and colour control. Tunable white enables the change between warm white and cold white. This can be used to enhance the feeling of well-being (Human Centric Lighting). Additionally RGBW and XY control format is supported. The typical application for these formats is improved product presentation – making fruit look good in a supermarket etc. or to attract attention to an advertisement. A new timer enables the smooth change of brightness and colour for all three formats. A firmware upgrade is available to upgrade older devices.

    Website: http://www.merten.com


    Merten’s new weather station basic V2 MEG6904-0001 combines a wind, precipitation and temperature sensor and three brightness sensors. It provides fully automatic blind and sun protection control with automatic adjustment of blinds according to the position of the sun. Rain sensor with integrated heating. If the mains (AC 110 – 230 V, 50 – 60 Hz) is not connected, the device runs without the heating. Automatic sun protection for up to three façades via three integrated brightness sensors is provided. Shading can be temporarily interrupted via an object. There are two brightness objects for external sensors and threshold functions with delay and logic operation for flexible solutions.

    Website: http://www.merten.com


    The new KNX push buttons are available with two, four, six, or eight button surfaces, which are arranged vertically and can be used in pairs or as individual button surfaces. The device provides extensive functions including switching and dimming (absolute or relative), lightscene control, blind and shutter control and room thermostat control which are freely configurable with ETS to any button. The push buttons fit in 55 mm systems with direct connection to the KNX bus and are powered by the KNX bus.

    Website: http://www.sunricher.com


    With the new application program “000131” for line and backbone coupler N 140/_3, it is now possible with ETS4/5 to set the “filter” function for the Main Groups 16 to 31, also for devices that have already been installed. The Group Address based communication on the KNX bus can thus be optimised. Additionally, the new blocking function of individually addressed telegrams provides increased protection against sabotage. If the transmission of these telegrams is blocked at the Line Coupler e. g. from main line to the line, then the commissioning of these devices is only possible within the line. The described function is also available for IP router N 146/02.

    Website: http://www.siemens.com/knx


    Synco IC ist ein cloudbasiertes System, welches von überall und jederzeit eine komplette Anlagenübersicht auf mobile Endgeräte, Tablets oder PC bietet. Per Fernzugriff reduziert sich der Serviceaufwand und verbessert die energieeffiziente Nutzung. Ein Gebäude zu verbinden, ist leicht und dauert nur wenige Minuten. Die Konfiguration des Systems kann ebenso wie Servicearbeiten per Fernzugriff erfolgen und die verteilten Liegenschaften lassen sich zentral steuern. Auf einen Blick sind die wichtigsten Informationen über die Anlage zu sehen und erlauben dem Anwender die Einstellungen mit einem Mausklick schnell zu korrigieren.

    Website: http://www.siemens.com/buildingtechnologies


    SIN.EQRTUEVO1T is a web server with an integrated data logger to acquire data from sinapsitech℗ smart repeaters, which collects information from devices that use wireless M-Bus protocol such as meters, heat cost allocators, digital and analogue I/O, probes. It also integrates a 20-device M-Bus port for wired applications. SIN.EQRTUEVO1T is SSL compliant and can manage up to 500 meters providing storage of daily readings for 10 years. The web interface allows report generation, M-Bus network setup and I/O management. The B.M.S. version allows a simple integration into most complete and complex building automation systems, making communication available via TCP / IP in KNX and other protocols.

    Website: http://www.sinapsitech.com


    Thanks to the universal radio receiver, commands from the Somfy RTS remotes can conveniently be transmitted to the KNX bus network for integration with any application. The receiver enables the control of any shading application, any switch function, lighting, dimming, heating, cooling, or ventilation via the same wireless RTS remote control. Up to ten universal radio inputs with max. five transmitters can be used per input. The device is powered over the KNX bus network. The RTS receiver for 447 MHz is available in 2 / 2017 while the 433 MHz variant will follow Q3 / 2017.

    Website: http://www.somfy.com


    The IS 3360 KNX infrared motion detector from STEINEL PROFESSIONAL watches over more than 1,000 m2 of space in large buildings, multi-storey car parks and indoor facilities. Providing a 360 degree angle of coverage, it ensures precision detection of any movement within a range of 20 m from a height of up to 4 m. Designed either for concealed or surface-mounted installation, it is available with a square or round enclosure for maximum versatility. Giving a range of user-friendly functions, it can be integrated into any chosen KNX installation with effortless ease.

    Website: http://www.steinel.de


    Ideal for logistics areas: the IS 345 MX Highbay infrared motion detector is the specialist for watching over narrow aisles with high ceilings between high-bay racking. It ensures the exact detection of movements at mounting heights of up to 14 metres. In a typical aisle shape, its detection zone has a maximum radial reach of 30 x 4 metres. It is available as a surface-mounted or concealed version with KNX, COM1, PF, DALI or LiveLink interfaces in a square housing. Thus, the IS 345 MX Highbay is easy to integrate into chosen installations in storage facilities or high-bay warehouses and is perfect for buildings with high ceilings, such as machine halls or departure lounges.

    Website: http://www.steinel.de


    A new member has recently joined the elite circle of KNX TP interface: STKITT (ST KNX Interface Twisted Pair Transceiver) samples are now available. Born from the collaboration between STMicroelectronics and Tapko Technologies, the new device has recently received KNX certification. STKITT is the smallest footprint solution using a QFN24L, 4 x 4 mm2 housing for the chip. This makes the STKITT a long awaited, low-cost solution. In addition, it has been designed to achieve high energy efficiency, allowing energy-saving implementations. To summarise, STKITT represents the right choice that, due to its flexibility, allows various configurations to provide the optimum solution in terms of energy, component count, footprint and cost.

    Website: http://www.st.com


  • T

    TAPKO TECHNOLOGIES TAPKO’s TP USB interface device UIM-KNX 42 enables addressing of every device in a KNX bus system with no extra application program required. It provides a PC / KNX data connection for commissioning, visualisation, protocolling and diagnosis. Via cEMI protocol, any software based on Falcon can use the UIM-KNX 42 for communication with other bus devices. Due to USB HID profile support, no specific USB driver is required. The UIM-KNX 42 supports long frames as well as a special diagnostic mode. To be ready for KNX Data Security, it is mandatory for a USB TP interface device to support long telegrams.

    Website: http://www.tapko.de


    TAPKO’s new version of TP Line Coupler MECtp is able to process telegram filtering over the entire group address range. In the ETS, there is also a new parameter available for suppressing device configurations from secondary line to main line. Useful as a Line Coupler, Area Coupler or Line Repeater in any KNX network, the MECtp provides a data connection with galvanic isolation between two separate KNX TP bus lines. The MECtp supports long telegrams and is able to (selectively) suspend telegram filtering at the single press of a button. Convenient during commissioning, this short-time access to other lines is possible even without ETS. The suspension period can be set via an ETS parameter.

    Website: http://www.tapko.de


    The new touch panel pureKNX-line7 completes the pureKNX family. Functionally it is oriented on the KNX base unit. Thanks to its glass touch-sensitive surface, it also convinces with its high-quality design. The system-wide operating concept “easy smart home” is simple and clear: four touch zones in the corners, a touchpad at the centre and a control ring for dimming or setting the room temperature. The functions of the individual control interfaces are freely parameterisable. Thanks to mobile apps for Android and iOS, the visualisation via smartphone can be operated with the same “look and feel”. Through the simultaneous use of touch panels and mobile devices, users enjoy the benefits of both worlds even globally.

    Website: http://www.ambiento.de


    presents the design touch panels aluna for mounting directly on the wall. The touch panels are equipped with a capacitive multi-touch display available in 7, 10 or 16 inches. They are particularly flat and have an enclosed housing. The panel can be mounted on exposed concrete, historic timber frame or other wall structures onto which housings cannot be installed. KNX and IP interfaces make the touch panels suitable for various applications such as building control, conference technology and digital signage. The integrated microphone and the speaker with echo cancellation allow the user hands-free conversations with high audio quality.

    Website: http://www.ambiento.de


    TENSE TOP DESIGN SWITCHES has launched an innovative built-on motion detector which combines functionality and an elegant design in a beautiful way. Thanks to its discrete housing, you can easily install the built-on motion detector on walls, plasterboard and concrete. Furthermore, this product is waterproof so this motion detector can be mounted outside as well. This product is available in white. But do you have a dark ceiling or wall? Do not worry, then just use the black variant. This built-on motion detector has a subtle cylindrical design due to its 30 x 73 mm dimensions. And it will create a uniform look in a project. In short, this design product offers every comfort and convenience to the customer.

    Website: http://www.tense.be


    The Belgian designer and manufacturer of Top Design KNX products has developed a PAINTABLE 1,2,4 & 8-fold touch-button switch which you can paint and varnish yourself in the same colour of the wall. In case you would use wallpaper, no problem, the WALLPAPER 1,2,4 & 8-fold switch has an inlay in which you can glue a piece of wallpaper, wood veneer, cork, leather, fish skin, etc., matching the same material of the wall.

    Website: http://www.tense.be


    Two field buses, one installation – the connection inbetween is this little box, which enables the bidirectional exchange of data between the OT boiler and the heat distribution via the KNX system. The KNX-OT-Box S allows demand-oriented and weather-compensated flow control, control of domestic hot water, and much more. It even provides a legionella protection program. As practical as with the MIX2 actuators: Also here, the KNX bus module can be removed, replaced and programmed, independently of the device.

    Website: http://www.theben.de/en


    With the AMUN 716 S KNX, Theben is presenting a new CO2 sensor for energy-efficient temperature control and for ventilation systems dependent on the room air quality. AMUN measures CO2 concentration, relative humidity, temperature and barometric air pressure. Thanks to three independently parameterisable thresholds for CO2 concentration and relative humidity, AMUN allows maximum air quality with minimum energy consumption. The integrated temperature controller allows, amongst other things, the control of actuators. With four binary inputs, AMUN can be flexibly integrated into any KNX installation.

    Website: http://www.theben.de/en


    The KNX/DALI Gateway combines the DALI protocol of digital lighting control with the building automation across rooms. It controls up to 64 operating units with DALI interface and assigns a DALI address to each DALI participant. The DALI participants can be combined in up to 16 groups of lights, and be controlled via KNX, individually or via scenes. Which lamps shine full of ambience at which brightness, or in which RGB colour – all this can be controlled via the KNX/DALI Gateway.

    Website: http://www.theben-hts.ch


    The new presence detector theRonda S360 KNX FLAT from ThebenHTS is attractive not only a result of its extremely flat design, but also thanks to convenient functions such as self-learning time delay, short-term presence, manual override, constant lighting control with standby function and dimmable lighting. Adjusting of the brightness measurement by entering the measured lux value via remote control is extremely simple. Teach-in and scene functions make the operation easier. Thanks to the high protection class IP54, theRonda is also suitable for wet rooms.

    Website: http://www.theben-hts.ch


    The Vitrum KNX series becomes more versatile for all users’ needs, while staying true to the elegant Vitrum design. Now a 6-fold device enriches the Vitrum KNX series, which includes interfaces, actuators and the new climate control. With our switches, you can manage all lighting functions. Switching lights on and off and dimming, but that’s not all: it can adjust the temperature, control window blinds and configure scenarios. KNX series devices have RGB backlighting (six different colours available) and proximity sensors to optimise energy consumption. It’s also possible to customise the aesthetics with icons. Lastly, the KNX series can be installed in Italian 3- or 4-gang modules and 1-gang British standard wall boxes.

    Website: http://www.vitrum.com


    This release focuses on intuitive blind and slat control using sliders and a modern graphical user interface for HVAC functions with individual presets and scheduling. Currently 12 common thermostat manufacturers are supported directly. Light and multimedia scenes can be fully customised by the user. Multimedia zones can be controlled using a text display and keypads. For advanced integration modules for text messages, ntp time master, logic and generic communication are available.

    Website: http://www.tisco.at


  • V

    The multi-room audio system Autrix now offers with the “AutrixCast” a free internet service as an extension to the MusicClientOne (integrated webradio and MP3 player). In addition to free storable favorite stations the “AutrixCast” automatically provides other channels, which are compiled by a team of music experts and updated regularly – sorted by genre. So there is something for every musical taste: whether you are looking for a new soundtrack for your fitness training or for the perfect feel-good mix – just push a button. And the handling? Simple and clear as usual. A true plug-and-play Internet radio solution – fully integrated in KNX!

    Website: http://www.viatron.de


    The KNX IR Linker from Viatron is a solution for combining infrared devices with the KNX bus system. The KNX IR Linker allows KNX devices such as switches, dimmers and blinds to be controlled via an infrared signal. In addition, the controlling of AV devices such as TV, blu-ray player etc. via the KNX bus system is also possible. All common infrared protocols are supported. Up to 22 switches, seven dimmers and seven blinds can be controlled and a total of 64 infrared signals can be emitted. The KNX IR Linker can be configured very easily and innovatively via the KNX bus system. Supported by KNbriX.

    Website: http://www.viatron.de


    Alluring at first sight, the Eikon Tactil ranges make a smooth, bright glass surface come alive. And beneath this elegant material you will find the Vimar KNX transponder readers for installation outside rooms. These devices have two relays to control the door lock, a courtesy light, or for other uses. With two inputs for connecting On/Off electrical equipment (for example to control the switch for opening and closing the door, a magnetic contact for signalling windows are open or closed, ceiling pull alarm, etc.) they are supplied with a front panel with four LED, each one associated to an icon for signalling a state.

    Website: http://www.vimar.it


  • W

    Adding the new WAREMA KNX multiple actuator to the surface-mounted housing allows between two and eight sun shading drives of 24 V DC voltage or 230 V AC voltage to be controlled independently of each other. The manual override operation and activation of the KNX programming button via Bluetooth and smartphone app are innovative and unique. Another advantage: easily replaceable miniature fuses provide the optimum line protection for the connected components, guaranteeing an extra level of safety. Standard commercial (venetian blind) push buttons can be connected via integrated binary inputs.

    Website: http://www.warema.de


    The KNX USB Stick 332 is a compact interface for the KNX bus. Like the new KNX USB interface 312 (DIN-rail mounted, 18 mm), the new stick supports the so-called KNX long frames. Longer telegrams speed up the download and are required for KNX security. The integrated LED show the connection status, telegram traffic as well as communication errors on the bus. The stick is compatible with the ETS® software (ETS3 or higher) and with numerous visualisations. The SDK kDrive is available for Windows and Linux to integrate the interface into its own programs. A module variant is also available for integration into the device.

    Website: http://www.weinzierl.de


    The KNX ENO 626 secure and 636 secure by Weinzierl are the first KNX gateways on the market to support secure radio communication with EnOcean devices. Commissioning is very simple: encryption can be activated individually for each channel. EnOcean sensors and actuators which support security can be linked as usual. The expanded scope is also new with over 100 device profiles (EEP EnOcean equipment profiles) now supported. The model 626 has eight channels and is suitable for installation in a flush-mounting box. The KNX ENO 636 supports up to 32 channels and has a discreet housing for wall mounting.

    Website: http://www.weinzierl.de


  • Y

    With the combo multifunction switch actuator, Yonnet provides control for lighting, shutters/blinds, underfloor heating and on/off valve. The product ranges is from 4-gang up to 24-gang with six different sizes available (4-, 8-, 12-, 16-, 20- and 24-gang modules). Yonnet offers good quality, very competitive prices and strong support.

    Website: http://www.yonnet.com.tr


    is again taking to the stage with a new product which drew attention at ISE Amsterdam on the KNX booth and at Frankfurt L+B. The last self-developed product from Yönnet is a KNX switch that outshines everything with its brilliant design and its functions. Iswitch has integrated light and temperature sensors in different button configurations, from one button to 12 buttons. There will be two models with and without VATN display. Iswitch offers perfect touch sensitivity, so the traditional customer who doesn’t like using touch keys will be more than satisfied. Besides, the unit is only 12 mm thick. Interra continues to work hard at full speed and will have new surprises soon.

    Website: http://www.yonnet.com.tr


  • Z

    IWAC Display is the Zennio access controller with display for hotels, which allows room access to guests through NFC or Bluetooth. Its design is printed on a high-strength tempered glass with exclusive customisation (images, icons, texts or logo) to give the desired aesthetic impression. The 2.4" backlit display shows the room number / name, an image or message when a guest is trying to access the room. IWAC Display allows each button to be selected to be used as a door bell, switch or any other action. Two outputs make it possible to open the door as well as the activation of other systems, such as the door bell. Two analogue / digital inputs are included.

    Website: http://www.zennio.com


    Z35 is the new Zennio capacitive touch panel with a 3.5" display, internal temperature probe and thermostat for two independent areas. It is able to contain up to 42 controls / indicators, distributed over up to seven pages with a navigation menu. A screensaver with date, time and / or temperature is set when the touch panel is not in use, and the device wakes up automatically when the user approaches thanks to the proximity sensor. Its brightness is regulated by the included ambient luminosity sensor. In addition, it incorporates four analogue-digital inputs that may be configured as binary inputs, for sensors and potential-free push-buttons, as temperature probe inputs or as motion sensor inputs.

    Website: http://www.zennio.com


    If you are looking for a price-optimised solution for single room regulation, then the KNX push button with room temperature sensor is the best choice. To measure the temperature in the living room, a feeler cable or an external temperature sensor can be attached to the KNX push-button at any time. Therefore the costs for expensive KNX room temperature sensors are dispensed with. If the temperature sensor is attached outside the KNX push button, the push button is also not influenced by the dissipated heat of the LEDs. The room temperature sensor can be mounted to save space on the wall and is programmed occurs via ETS. Contact: www.zidatech.ch

    Website: http://www.zidatech.ch