KNX Secure Header

KNX Secure Products

KNX Association is proud to present the first KNX IP Secure and KNX Data Secure products. With devices coming from various manufacturers, KNX Secure is ushering the new era of security for smart homes and smart buildings all over the world.

ABB i-bus® KNX IP Secure – IPR/S 3.5.1

ABB Nowadays security is one of the key decision factors when it comes to smarter buildings. ABB’s IP Secure products protect the KNX installation and offer the highest security which is available on the building automation market. KNX telegrams are now transmitted in encrypted form between KNX IP routers on the IP network. Runtime communication on IP as well as commissioning via ETS is secure now, ensuring that KNX telegrams cannot be read on IP.

Contact: www.new.abb.com

ABBzoom
 
Controltroniczoom

GT – Glas Touch Sensor

CONTROLTRONIC GMBH KNX Glass Touch Sensor and KNX Room Thermostat with KNX Data Secure: The CONTROLtronic glass touch series Living Emotions® offers innovative technology and superior design: Real glass in different colors and finishes, Icons self-exchangeable for one to seven sensor fields, Color LED illumination RGBW,

 

Proximity detection, Temperature and air humidity sensor and Flat in-wall mounting with invisible magnetic fixing. With the support of KNX Data Secure, the CONTROLtronic KNX Glass Touch Sensors and KNX Room Thermostats make it possible to set up a secure and protected KNX installation. In commercial buildings, hotels and in outside and public areas of residential buildings – so wherever the KNX Line is free accessible – protection of the installation by data encryption is essential.

Contact: www.controltronic.com

IO16F01KNX

EELECTRON The IO16F01KNX has 16 inputs / 16 outputs, 16a rated module for lights, fan coils, venetians and valve controls. It controls up to four analogue inputs, has manual control and an SD card to save ETS configuration for fast recovery. The product supports KNX Data Secure, allowing ETS security activation over Group Addresses with data protection password.

eelectron
 

The device allows: device authentication, where sender MAC address is decrypted and authenticated to avoid fraudulent message replication; message confidentiality, were message content is encrypted and decrypted from authorised receivers; or both.

Contact: www.eelectron.com

enertexzoom

Enertex KNX IP Secure Interface

ENERTEX The KNX IP Secure Interface (2TE) authenticates and encrypts KNX and IP telegrams. Up to eight tunnel connections can be used encrypted or unencrypted. The communication performance is impressive with up to 49 telegrams per second. The interface has a buffered real-time clock and SNTP server. An OLED display shows important device parameters. Telnet provides further parameterization and diagnostics functions. The interface is powered directly from the KNX bus.

Contact: www.enertex.de

 

Enertex KNX IP Secure Router

ENERTEX The KNX IP Secure Router (2TE) authenticates and encrypts KNX and IP telegrams. Up to eight tunnel connections can be used encrypted or unencrypted. The communication performance is impressive with up to 49 telegrams per second. The device can be used as a line or area couple. The router has a buffered real-time clock and SNTP server. An OLED display shows important device parameters. Telnet provides further parameterization and diagnostics functions. The router is powered directly from the KNX bus.

Contact: www.enertex.de

enertexzoom
 
Girazoom

Gira KNX IP-Router Secure

GIRA GIERSIEPEN GMBH & CO. KG The Gira KNX IP-Router connects KNX Lines via IP networks with the function of a Line / Area coupler und serves as ETS data interface. Next to the many benefits of an IP infrastructure, it also offers of course an obvious threat of being tampered with. Thanks to the support of KNX Secure for protected communication, the Gira KNX IP Router is the first choice to counter this kind of attacks. Smart additional functions, such as a KNX timer or the KNX telegram recording on microSD card, top the device off.

Contact: www.gira.de

 

RNX-GW1

REDFISH The RNX-GW1 is a modern security focused interface between the KNX network and the rest of the world. At its core, it supports the KNXnet/IP Secure protocol, with up to 25 concurrent tunnelling connections. Secure end-to-end remote access (including programming with the ETS) is included with the KNX Anywhere cloud service.

Redfishzoom
 

Also included: web ready (management app, web services), configured for guaranteed automatic security updates, multi-user support with roles, google home integration, modbus, ...

Contact: www.redfish.com.au/edge

Tapkozoom

KAIstack-secure

TAPKO Due to growing demand for secure communication, TAPKO is offering full KNX Secure support in its latest KNX communication software release, KAIstack-secure. In spite of increased complexity, the application developer has almost no additional effort despite KNX Secure.

 

Updating existing KAIstacks and applications is straightforward. The required update ability is satisfied with a sophisticated robust remote update process for reprogramming the complete firmware – KAIstacksecure together with application. Since KNX Secure has also hardware impacts, new hardware EVAL boards are offered for evaluation.

Contact: www.tapko.com

MECtp-secure

TAPKO presents the Line / Area Coupler MECtp-secure as first system component supporting KNX Secure. Its ability to process secured telegrams guarantees safe commissioning. Being particularly important for Couplers and Routers, the configuration communication is protected. To prevent access to the Main Line, MECtp-secure can block device-oriented messages from the secondary Line.

Tapkozoom
 

The function button, originally introduced by TAPKO for temporary deactivation of message filtering, is further improving the comfort and reliability of this device.

Contact: www.tapko.com

Tapkozoom

TAI4-secure

TAPKO TAPKO´s proven TAI4-secure 4-fold binary I/O module is now available with KNX Secure. Any kind of manipulation during runtime communication and commissioning is not possible anymore. All usual input functions of the I/O module like switching, dimming, shutters, blinds control and scenes can be used in a common way.

 

Besides the input functionality of TAI4-secure for sensing NO/NC floating contacts of push-buttons, conventional switches and contact sensors, it is also a perfect binary output for driving various loads, like status LEDs, with a comparably high amount of power. Even dimming of the connected LEDs is possible. Due to its small housing, TAI4-secure finds place in a flush-mounted box behind the switch.

Contact: www.tapko.com

UIMip-secure

TAPKO In times of hackers intrude in building technology, UIMip-secure, the security enhanced version of our existing UIMip, is the proper an-swer. While KNX Secure is a red-hot subject, UIMip-secure connects the ETS for commissioning and monitoring in a reliable and secure way over IP. UIMip-secure protects the tunnelling protocol successfully against intrusion, according to the standard EN  50090-4-3. UIMip-secure is preserving valuable features like no external power supply, device info and firmware update via web frontend. Also available as OEM.

Contact: www.tapko.com

Tapkozoom
 
Tapkozoom

MECip-secure

TAPKO MECip-secure is the security enhanced version of our existing high performance KNXnet IP Router, connecting the upper KNXnet IP Line and the lower KNX TP Line. MECip-secure protects successfully against intrusion attempts, according to the standard EN 50090-4-3. Of course, valuable features like: no external power supply, reduction of unnecessary traffic in case of misconfiguration, manual suspend-ing of filtering, device access and firmware update via web frontend are preserved. The integrated tunnelling protocol connecting ETS for commissioning and monitoring is also secured. Also available as OEM.

Contact: www.tapko.com

 

IPS640-secure

TAPKO IPS640-secure, the security enhanced version of our existing intelligent KNX Power Supply. IPS640-secure is fully protected against hacker attacks, according to the standard EN 50090-4-3. This way cru-cial functions like KNX bus reset of a Line, sending of alarm messages like: internal temperature, overload, short-circuit, device start-up and measurement alarms (after threshold value crossing) are protected against misuse. IPS640-secure is the slimmest intelligent 640 mA KNX Power Supply on the market at only 2 TE (35 mm). It is minimising costs as more KNX devices can be mounted on a single DIN-rail. Also available as OEM.

Contact: www.tapko.com

Tapkozoom
 
Weinzierlzoom

KNX IO 511 (Secure)

WEINZIERL ENGINEERING With the KNX IO 511 Secure, Weinzierl has ex-panded its product range of the IO product family with a device with support for KNX Data Secure. The compact switch actuator with one bi-stable output and two binary inputs provides functions for universal outputs including scene control, on / off delay, staircase light switching and control of heating valves. The inputs can be connected to conven-tional switches with an external voltage of 12 to 230 V. The actuator combined with input B1 serves as a latching relay. Input B2 is used for zero crossing detection. The configuration is encrypted with the ETS5.

Contact: www.weinzierl.de

 

KNX RF Push Button Insert 440

WEINZIERL ENGINEERING The KNX RF Push Button Insert 440 by Wein-zierl is compatible with standard switch housings and is characterised by a soft pressure point of the buttons. It is suitable as an alternative for wired switches without routing bus cables. The device is commis-sioned with the ETS5 and supports KNX Data Secure.

Weinzierlzoom
 

The push button is freely configurable as single or double rockers for switching, dim-ming and blind functions. In addition, values can be sent and scenes can be called up. The connection to KNX TP is made via a KNX TP / RF Coupler (e. g. new Weinzierl KNX TP / RF 672). An integrated USB in-terface is used both to configure the device and to program other KNX RF devices. It is powered by a standard CR2032 battery.

Contact: www.weinzierl.de