Nuevos Productos KNX
En esta lista podrá encontrar nuevos productos KNX introducidos al mercado recientemente.
Total: 146 productos
The device uses a graphical programming interface in the ETS software environment. It comes also with a comprehensive library of functions to control all building applications. The library includes solutions for heating, ventilation and climate control. The installation of extra software is not necessary. Furthermore, the system comes with a simulator function. Using simulation the system integrator is able to make sure that the logic controller performs all commands correctly before commissioning the device on the project’s site. Thus, the logic lontroller is a reliable companion for KNX system integrators to successfully implement their projects.
Smart Buildings under control? With the new ABB Logic Controller ABA/S 1.2.1, system integrators can quickly and flexibly deal with the most challenging project requirements – with a maximum level of freedom in design. That is because the logic controller can easily and reliably accommodate altered or extended functionality requests during the construction or usage of buildings.
The F50 KNX compact room controller appeals due to its intuitive operation and two built-in temperature controllers. The backlit LCD clearly shows the most important values and functions, irrespective of the viewing angle. Depending on the respective functions, the button icons shown on the display may be individually selected during programming. Buttons labelled using the graphic tool further assist the user in assigning functions; the same applies to the RGB status LED. Push button sensor or controller functions may be assigned to each of the room controller buttons.
The Smart Visu Server is the optimum solution to visualise a KNX installation both quickly and cost-effectively. The compact device for wall or rail mounting certainly packs a punch: simply launch the integrated commissioning interface SV Control via the web browser and create the visualisation following an intuitive process. The operation is carried out via the clearly structured user interface Smart Visu Home, whereby the user can carry out their own settings or actions. The device has been conceived for mobile control via smart devices – independently of the operating system – and thus provides an added plus in terms of convenience and flexibility.
The modules, designed and built entirely in Italy, are optimal for energy metering, power and power swings in home automation, civil and industrial plants and photovoltaic systems. The compact size also makes it an ideal product for installation in narrow spaces. Each KNX module can be combined with Algodue UEC single- and three-phase counters, and can also be used in the event of product replacements. Algodue Elettronica, thanks to decades of experience in the field of industrial customisation (OEM), also offers versions designed and manufactured based on the customer’s specific needs.
The Apricum RF media coupler MECrf connects the RF media to the KNX TP bus system. With the MECrf, it is easily possible to suppress the configuration of devices from the RF subline to the TP main line. Filtering of messages can be temporarily suspended by a single push button action. The push button can be configured by the user and the period of suspension can be set with an ETS parameter. Other KNX lines can thus be accessed even without downloading from the ETS. This simplifies the commissioning of every KNX system. The MECrf supports long frames and enables telegram filtering according to Individual and Group Addresses. In addition, all faulty communication on the KNX bus is accurately indicated by the dual LED display.
Thermal energy calculators are an integral part of modern energy management systems. CALEC® ST II is characterised by its high accuracy and the multi-bus capability. It is recently also available with a KNX interface. It calculates the energy consumption on the basis of parameters, which can be transferred to a central monitoring system. CALEC ST® II is even more versatile thanks to KNX and it additionally offers BACnet MS / TP, M-Bus and interfaces for other technologies.. The regular energy reading can for example be performed with a conventional system and at the same time the energy and temperature values of CALEC® ST II can be integrated into the KNX system.
VFace is an easy configurable VRV / VRF gateway for KNX projects, supports most of the existing brands and provides end users with full control of all indoor units via KNX or web interface. Easy integration of VRF without any other equipment directly to KNX and simple configuration of all settings via the web interface. It can also be used remotely by web interface to control and monitor indoor units or to create timing scenes for indoor units. Moreover, VFace has a 7" touch screen option that can be used as a central remote controller.
Wherever you need professional media playout solutions to be integrated with effective KNX workflows, AV Stumpfl can offer both fully compatible software and hardware solutions. Using our Avio Manager software toolkit, building automation projects featuring audio visual displays can be easily set up using node point connections. The FHD Player hardware combines high quality and interactive media playout and natively integrates into KNX bus networks. Potential applications range from museums to corporate digital signage. You can maximise efficiency and remove compatibility issues when integrating AV displays by using AV Stumpfl products in this way.
Avio Manager is a software toolkit developed by AV Stumpfl which introduces a completely new workflow for home and building automation projects: All devices, KNX group addresses and user interfaces of an installation visualise their data points in a well-organised way and can be connected with each other by dragging graphical lines between them. It doesn’t even play a role between which physical entities these connections are made. On top of that it is also possible to add logical functions such as AND/ OR gates, IF/ELSE clauses or timers to be used with any datapoints of the system.
AUDIO AMP, a powerful amplifier with a power output of 2 x 50 watts, is the perfect supplement for the AUDIO MODULE KNX line. As a DIN rail mounted device, it is ideally suited for discrete and tamper-proof installations. An efficient class D amplifier and the integrated DSP chip (192 kHz / 24 bit sample rate) provide excellent sound quality, while the auto standby feature ensures a particularly low power consumption. With its 3.5 mm phone jack, the AUDIO AMP offers a flexible and convenient input. Volume and mute can additionally be controlled by floating contacts.
The AUDIO MODULE is a premium multi-room audio player which is alternatively available with a line-out or integrated amplifier. As a DIN rail device, installed in the distribution board, it is protected against theft and manipulation. This makes it ideally suited for commercial properties such as hotels. Thanks to the direct KNX connection the AUDIO MODULE can be easily integrated into KNX installations and allows on-site control with KNX sensors as well as control through building visualisations. It can play audio from local media servers as well as stream internet radio stations and Spotify contents. The analogue audio input allows playback from external devices such as CD players.
At ISE 2017, Basalte introduced the Deseo temperature controller, a comprehensive HVAC controller that directly integrates with KNX home automation. Its elegant design and use of top-quality materials enable HVAC control to blend into any interior, thanks to the high-quality finishes such as aluminium, bronze and glass. The internal temperature sensor and thermostat monitor heating, cooling and ventilation in the room. Its unique, user-friendly interface provides simple controls for setpoint, ventilation and modes. Combined with Basalte’s unique multi-touch functionalities, Deseo becomes the one-stop keypad for HVAC and quick lighting control in your room.
Als kostengünstige Einheit aus Differenzdrucksensor, Regler und Antrieb setzt der VAV-Compact seit 1990 Maßstäbe für die Volumenstromregelung in Räumen und Zonen. Der VAV-Compact KNX lässt sich direkt in ein KNX TP Netzwerke einbinden und überzeugt mit einer umfassenden Auswahl an Kommunikationsobjekten. Damit lässt sich der Betrieb der Luftaufbereitung auf den effektiven Bedarf regeln. Zusätzlich kann ein Sensor (0 – 10 V) oder ein Schaltkontakt angeschlossen werden. Das KNX Sortiment umfasst neben Volumenstromreglern auch Antriebe für Luftklappen und Regelkugelhähne (2-/3- und 6-Weg).
AUTOMATION KNX Project Tool offers a unique solution to create, manage and follow up your KNX projects. On top of that, a detailed function description and actuator report to hand out to your clients is easily generated. Visually create your project by drag and drop KNX devices onto your drawing board, in the same way you can add functions you are selling to your client. The tool will automatically calculate costs and programming time.
The new RGBWL-K (reference DM480440) is a 4-channel controller for controlling RGB, RGBW or any other low voltage (10 – 24 V DC) LED strip modules. It allows each output to be controlled independently to regulate four monochrome channels or all channels simultaneously for RGB and RGBW applications. It is able to select a particular colour using a colour selector and to modify the brightness of the chosen colour or of each channel individually. This device also allows the programming of scenes and sequences and also has an advanced logic unit with eight blocks of operations including logic, comparison and arithmetic operations as well as timer blocks and counters.
The new DMXBUS-K is the renovated and bidirectional communication gateway between the KNX protocol and the DMX 512 protocol. This device allows you to regulate each channel supported by the DMX protocol, being easily programmable through the project software ETS. Thanks to this gateway it is possible to develop the integration of a DMX device or system into a KNX home automation installation, and individually regulate each DMX channel in a simple way like any other KNX dimmer. It also incorporates new functionalities, mainly the possibility to program and execute up to eight scenarios and eight different sequences, as well as RGB and RGBW controlling.
The optimum effect of the light is only achieved through professional LED lighting management. BILTON offers control units in three devices and in all standard signal variants. The SXT series is a 1 – 4 channel LED dimmer for constant voltage-powered LED modules, with an integrated power supply. The new control unit provides an output load of 96 W with an input current of 24 V. Each channel can have a maximum load of 4 A. Further advantages are the simple control of scenes and sequences, quick configuration time and the adjustment of the dimming curve. The Bilton LED dimmer SXT is available in the following signal options: KNX, DALI, Switch Dim, DMX, 1 – 10 V Analogue.
Smaller design, more power – that is offered by the new LED dimmer by BILTON. The name BILTON represents innovation “Made in Austria”. A further proof is the new KNX LED dimmer Basic. The redesign does not only convince because of its small design – which is therefore ideal for areas with difficult access – but it also provides more power with 2.5 A per channel. In addition, the new BILTON LED dimmer also offers the option to control the device using a test button – and this without a bus connection. Additional benefits include the easy scene and sequence control, fast programming time and the selection of the dimming curve.
Use voice control and query through Siri® for KNX. The realKNX mini server acts as a bridge between a KNX installation and Apple’s iDevices. realKNX enables voice control and powerful automation including geofencing. realKNX requires no configuration. The realKNX mini server will automatically find the KNX proServ gateway, then load the building structure that has been configured in ETS and expose it to the Apple clients. This will take five minutes and requires no interaction. Finally launch the realKNX app – it will automatically sort all KNX functions in the rooms. Siri and HomeKit compatible apps are now ready to use.
Blumotix has designed a new high performance touch panel dedicated to home automation. BX-T10IP is a device born to be your Internal IP Video Door Station and your KNX Supervisor. Multi-ﬁnger capacitive touch, Android operating system supported by 1 GHz dual core microprocessor, and a Giga Ethernet network interface. New sound system based on bass reﬂex technology obtained from the wall mount cavity enables you to reduce noise and echo in IP Door phone application. BX-T10IP is an open device so you are free to install any available Android application.
The main and sub modules for 24 V DC drives include four motor outputs and eight binary inputs per device. The connection to the KNX bus is realised via the main module. Thus each combination is just one KNX participant. Integrated security objects and priority management ensure that the controlled products like blinds, awnings, large louvre blades, roller shutters, windows, light domes, etc. are damage-proof at any time. The speed control during acceleration and braking protects the drives and the blockage detection ensures a risk-free operation. The automatic detection of end positions, the 6-byte “SunControl” object as well as the preconfigured product libraries and movement strategies provide support with fast commissioning.
To control the complete sun shading system in a compact way – that’s why BMS has developed the new KNX Touch-Display. The 3.5" colour display with touch function is mounted on a standard switch box and communicates with the Quadra weather controller directly via KNX. Both the control and the display functions were particularly designed for this purpose. Thus the user is able to observe the current weather data as well as active alarms at any time. All eight sectors of the Quadra weather controller can be operated individually and limit values can be adjusted specifically to the user. Simply touch to activate cleaning and maintenance functions or to move the complete sun shading into a preferred position.
The new PD2N-KNX is available in three different functional variants: BA (simple requirements), ST (common requirements) und DX (demanding applications). Innovative functions such as short presence, i. e. reduced follow-up time after only a short period of presence or offset via three light zones enable perfect lighting control. Thanks to birectional remote control, the parameters can be read out easily at any time. Due to an internal and external light sensor and an additional brightness object as well as the possibility to connect an external light sensor via infrared, light measurement is optimised.
In order to meet almost every demand, B.E.G. offers its new KNX detector generation 6 in three different versions: Basic (BA), Standard (ST), and Deluxe (DX). Highlights of the functional improvement of the ST version are the improved light measurement thanks to two light sensors and the possibility to address every motion sensor individually using ETS. The DX version offers a lot of new features, e. g. the presence simulation. The BA detectors, being able to switch lights, offer the possibility of integrating engineering rooms or storage rooms into the KNX system costefficiently.
24 / 16 / 8 / 4-fold KNX binary output for switching and control of loads or 12 / 8 / 4 / 2-fold KNX actuator for the control of drives for motorised blinds, shutters or curtains. To be used in KNX installations for home and building automation. BSmart KNX products make it possible to achieve the most convenient solutions for projects and also increase the comfort of living spaces while decreasing energy costs.
The new Busch-Presence detector Corridor KNX is especially designed for use in hallways and long corridors. The detector reaches a detection range of up to 30 metres. This single device covers areas which previously required several detectors to be used. Its extra-flat design blends seamlessly into the existing room design. With the integrated room temperature controller, the premium version of the Busch-Presence detector Corridor KNX can additionally regulate heating and cooling. Moreover, constant lighting control as well as two power off stages can be implemented. The detector can also be set to programming mode via the infrared remote control.
Although they have an extremely flat design, the new Busch-Jaeger KNX presence and movement detectors are outstanding as regards their detection quality and enormous range. Their simple installation and start-up are extra advantages – e.g. at high installation heights the Premium and Sky versions can be switched to programming mode using a standard, Busch-Jaeger, infrared, remote control. Premium models are fitted with a temperature sensor and can also act as room-temperature controllers. The new ETS applications also include the option for switching the light off in two stages.
Busch-Jaeger now offers comprehensive solutions in commercial buildings including security with movement detectors; the right balance between heating and cooling with room temperature controller; fresh air from a new CO2 air sensor; and push button connection. This complete KNX assortment consists of approved movement detectors, new room temperature controller with five gang universal input, air-quality CO2 sensor incl. humidity and at least push button connection with integrated RGB LED per rocker switch. The entire KNX product range can be combined with ABB/Busch-Jaeger light switch ranges future® linear, Busch-axcent®, solo®, carat®, Busch-Duro 2000® SI and Reflex SI.
The Maestro-Server-4 is a very cost effective, extremely powerful and flexible Control Center for the KNX system and an ultimate gateway between KNX, IoT and other systems as it controls them using RS232,IP and IR. The MS4 is a web and Smart-Phone server utilizing the same unmatched, user friendly, Maestro GUI, simplifying control of home and building systems. It provides all essential functions: schedule and macro manager, powerful function blocks controller, event logger and a KNXnet/IP gateway. The MS4 enables two-way control of external systems such as multimedia and VRV A/C systems. The Maestro script language modules enable writing of complex protocols and energy management algorithms.
The Belgian pioneer in design switches launched their famous “NINA” collection on KNX so you can now easily integrate this KNX design switch into your KNX project. The cover plate, made out of aluminium, is available in more than 14 high-end finishes. Each lever is available in chrome, gold, antique silver and antique bronze and has a separate function for upward and downward movement. Other possibilities: short and long keystroke, night and day LED indicators, brightness adaptability, dimming, blind / shutter control, lightscenes etc. This collection is available with or without control LED and can be equipped with an optional temperature and humidity sensor. It is available with up to two levers on a single cover plate and is to be installed in universal built-in boxes.
As the name already suggests, the ‘flatline’ is a very thin design of only 2 mm thickness. Two KNX collections, LARA and LOLA, are now available in this stunning unique flatline design. The LARA collection is a collection with square push buttons and the LOLA collection has small square flat push buttons (one up to eight push buttons). Each available with or without LEDs. Next to these two collections of KNX switches there is also a flatline series available for the VICTOR collection of cover plates for sockets / modules so that this flatline style can be integrated in the entire project. Like the other collections, this flatline edition is made out of aluminium and is available in more than 14 high-end finishes.
ComfortClick Jigsaw is the new server for controlling KNX-based smart homes. Jigsaw now comes with an integrated KNX interface and bOS visualisation software, which enables you to control all devices in your smart building from a single app on any mobile device. In addition to KNX, Jigsaw also supports: Z-Wave, Modbus, DSC alarm, Sonos, IP cameras, Kodi, Global Caché, IRTrans, Philips Hue, SMA devices, TCP / IP devices and IP intercoms. bOS Configurator enables you to design your own custom GUI, logical operations, scenes and schedules. Control and monitor your smart home with free bOS Client apps for iOS, Android and Windows or Amazon Echo.
Innovative technology and superior design. The unique flat touch sensor made of real glass with precisely ground edges provides innovative character in every room. A sensor detects proximity and activates the user interface. Depending on configuration up to seven touch icons light up (dimmable and coloured according to choice). Easy to understand and self-exchangeable icons (patent pending) allow purely intuitive operation and maximum flexibility. Extensive configurations can simply be carried out due to a user-friendly structured ETS product database without plug-in. The whole sensor is entirely powered via KNX connection.
The UCM/KNX2, which connects directly to the KNX bus, is the 3rd generation KNX interface for the comfort intruder alarm/automation system. All doors, windows, motion, smoke and other sensors can be mapped to KNX objects to show real-time status. A KNX touch screen can show a virtual security keypad, which can be used to arm and disarm the security system. Intruder, fire, panic and other alarms can be mapped to KNX objects. KNX motion sensors can be used as virtual inputs for the alarm so that they can cause an alarm when the system is armed. The system includes conditional logic programming and scheduling, and allows KNX and alarm control by mobile Apps, SMS messages and telephone voice menu.
Now with two HDMI and USB ports. A monitoring system that simplifies everything: The new Minor generation from Dialogic Systems has two HMDI and USB ports, so two PCs can be connected and controlled simultaneously. The KNX visualisation for building automation can thus be run on one computer, while the other PC monitors security technology, for instance. To this end, there is a 3 mm thick, touch-operated, real glass panel and a sound card, plus loudspeakers and a microphone. A voice performance module and a 5 MP camera are available as options too. Get in touch with the future!
Dialogic Systems GmbH & Co. KG (Germany)HomeAmp4: 4-zone stereo amplifier with KNX and button control
A unique innovation for every smart home: this new Dialogic Systems 19-inch multiroom amplifier is directly controllable via bus and KNX systems with no ETS plug-in – as well as controllable by conventional buttons as a single amplifier. Especially handy: no external power supply required. The HomeAmp4’s top features include automatic switching to the appropriate slave audio source 1 – 4 on detection of a channel signal. Plus ready-to-use plug-in software solutions for Wago, Beckhoff, HomeServer and HomeCockpit. Get in touch with the future.
New Laüka range of touch-sensitive glass pushbuttons, allowing control of lighting and blinds. Control: The Laüka series is a range of switches designed to provide full control to the user over the lighting, the blinds and, in turn, the ability to memorise scenes to generate the desired ambience. Versatility: Created to meet the diverse needs of both professional and private types of installations: home, restaurants, hotels, etc. Integration: Perfect integration in all types of interiors. Functionality: Formed by 4 / 8 buttons where direct functions can be assigned to control the lighting, move the blinds or create personalised scenes. It incorporates temperature sensors and a configurable thermostat.
DINUY introduces a new four-channel, powerful dimmer designed for the control of RGBW LED strips. Suitable for LED strips with constant 12 – 24 V input. The four channels can be configured as: four independent channels, one RGBW channel or one RGB channel + one independent channel. High capacity, with 16 A per channel and a total combined output current of 32 A. Pulse Width Modulation (PWM) dimming technology. Output relay to control the power supply. Modular installation device and five modules wide. Several functions and parameters are available via ETS: dimming speed, scenes and sequences, supervision of over-current or over-temperature, minimum and maximum dimming level, soft dimming, colour mixture and much more.
The solution for your stable, secure and controlled network. DIVUS HEARTBEAT is a hardware software solution, composed of a PoE+ enabled managed switch and an innovative manager for KNX CONTROL. Integrated into the network, it creates a secure area for building automation, the “DIVUS SECURE NET”. A protected intranet, in which the devices interact perfectly, but can not be attacked from the outside. Additional features such as status scan, real-time monitoring, system diagnostics and troubleshooting provide support through automatically generated system reports making it to an indispensable innovation for your building network!
DIVUS presents its new System Manager. The hardware-software solution is composed of a PoE+ capable managed switch and an innovative manager. Integrated into the network, it is the heart of a smart building and ensures a secure and stable connection between DIVUS devices. The software provides novel functionalities that will benefit the system integrator as well as the end-user: system-wide configuration for an easy and quick installation, system scan, system diagnostics and trouble-shooting support through automatically generated system reports, real-time monitoring and usage analytics. A first of its kind solution for a stable, secure and controlled network!
XD100 KNX detector with a compact and unobtrusive design is ideal for interior rooms such as medium- to large-sized offices, corridors, classrooms, car parks, conference and meeting rooms. The detector is available in two models; PD100 presence detector, MD100 motion detector. Both models have flush-mounted and surface-mounted versions. XD100 has three independent channels; presence, lighting (up to four lighting groups) and HVAC. The constant lighting function can be applied with two different setpoints related to the presence information (e. g. during presence: 500 lux, during absence: 100 lux). The lighting can be set to different brightness levels or scenes can be recalled based on motion detection thanks to the corridor function. XD100 KNX detector can either be used as a standalone device or master-slave device (parallel operation with other XD100s) according to the requirements.
DM04A01KNX is a KNX universal power dimmer with four channels x 300 W, automatic identification of the load type and with configurable parameters to optimise the control of different lamps such as LED, incandescent and halogen, CFL dimmable lights and low voltage lamps with electronic or ferromagnetic transformer.
The GlassPad KNX is available in two colors (white and black). The product comes in four different versions: three and six channels for three modules in-wall box or four and eight channels for four modules in-wall box. Every product of the range has LED signaling for each channel and can be installed vertically or horizontally. Pressing the switch can be long or short and every GlassPad can manage scenarios or sequences. The customization of the glass color, texts and icons for residential and commercial environments is available on demand. The product is fully programmable with ETS.
The DL04A01KNX is a four-channel LED dimmer for constant voltage application at 12/24/48 V. Each channel can manage up to 70 W @ 24 V DC. Local control and signalling available on the product. DL04A01KNX can manage four channels independently or RGB / RGBW channels. Four module dimension and suitable for distribution box and DIN rail installation.
By integrating ekey fingerprint access control systems via a KNX interface, the ultimate benefit will be added to your installation: personalised building control using biometric data that guarantees unique identification. Save up to 99 fingerprints within one installation and use up to ten ekey events to program customised scenarios through the ETS. Apart from these ten standard events, there is a dedicated event available for unknown fingerprints / users. A security event can be triggered automatically after a certain number of rejections were recognised by the ekey finger scanner within a configurable time period.
The KNX B8-TH is a compact interface that fits into any switch box. Via eight binary inputs, for example, contacts for windows or push buttons for dimming, switching or up / down movement are integrated into the KNX system. Wall sensors for 55 mm switch series and a feed probe connected to special inputs provide values for the internal ambient and ventilation control of the interface. The room temperature and air humidity are thus recorded. If required, the surface temperature of a heating / cooling system is also measured and the dew point is monitored.
Salva KNX is a smoke detector tested according to DIN EN 14604:2005/AC:2008 with sensors for temperature, humidity and air pressure. Smoke is detected optically by the scattered light principle. Temperature variations are taken into account and the contamination of the chamber is monitored. Alarm is output locally/acoustically and also as bus telegram. Salva KNX can report smoke and act as a heat alarm. The unit carries out a self-test regularly and indicates faults locally and via the bus. In daily operation, Salva KNX is an ambient climate sensor which controls heating/ cooling and ventilation. Other useful built-in features are, for example, the dew point calculation, logic gates and calculator modules.
Cloud services like Amazon Echo, Apple HomeKit and others, can now speak to KNX. Amazon provides a voice interface to combine home control, music control, home shopping, news, traffic and weather updates and more. Voice-assisted living has never been so easy to implement with new LogicMachine5. LogicMachine5 controls and interconnects all Amazon Echo and Apple devices and allows you to control your installation via voice commands.
Embedded Systems prepared a useful tool which can strongly extend ETS functionality and can be useful for any KNX professional. It is a free, online KNX project file parser. You can get a list of devices, their relations and visualise topology. You can also get metadata and filtering table with group addresses. This data can be exported directly into Excel via CSV or to Cloud (Microsoft Azure, AWS and others). This service will be expanded with new modules for preparing project documentation, labelling, visualisation and so on.
All-in-one room controller in compact DIN rail enclosure (just 2 MCB size) links KNX to multiple other systems. They are expandable with cascaded modules of choice (8 x 16 A + 8i, 12 x 16 A + 12 inputs, 12 x 16 A + 12 0 – 10 V outputs). Objects, group addresses and scenarios (trigger/executor) are configurable from built-in web interface. It also works as a KNX TP to IP converter or USB sniffer and comes with free iOS and Android mobile apps. HCM340 can connect to cloud systems to control your premises even when you don’t have a static IP address. All functionality can be optional, to match the project budget.
Enertex introduces a new variant of its SmartMeter with an integrated clock. The variant includes all the features of the basic device: bidirectional energy meter, measurement of current, voltage, active power, reactive power, power factor, THD, harmonics, zero system current. Due to its internal clock, the SmartMeter can even record all the values with a correct time stamp, if no KNX bus is connected. Therefore the device can also be used as a standalone data logger to record the power supply quality and energy consumption or generation, without the need for any software configuration. In this mode, all the measurement values are recorded at each minute on an SD card in the CSV text format.
The ProxyTouch KNX is a capacitive touch sensor, which can be plugged behind surfaces as ceramics, wood and glass. It has three sensor panels in a plastic housing 210 x 140 x 12 mm and is impermeable to splash-water. The sensors are addressed together, individually or by wiping with double click gesture. Optionally there is an acoustic feedback and a cleaning mode with time lock. The reach of operation through the surface material, behind which the device is plugged is 25 mm. The sensors are robust against splash-water on the surface material.
Panno S, the next generation “all in one” product, is the world’s first home automation system control panel from enno electronics that integrates multiple protocols and is compatible with KNX bus technology, EnOcean wireless technology, Apple HomeKit and RS485 standards. Aircraft-grade aluminum metal with vibration feedback, adaptive 320*320 AMOLED backlit LED display, 8 zone 0 – 10 V dimming control, Apple Siri voice control, iOS App control and proximity sensor. Without additional modules or switches installed, you can easily set up and control the lights, air conditioning and HVAC ventilation system in your home. Numerous functions are integrated that allow most of the demands to be satisfied.
New technologies open up paths for new possibilities in building automation. KNX control via iPad or iPhone – no problem, thanks to the user-friendly EBOX from ergo3. With this device, you have access to sensors for brightness, wind, precipitation, temperature and global solar radiation for controlling your solar shading as required. All this is just a download away with the Ergo3 App, free of charge from the App Store. The EBOX can do much more than this, however. You can program various scenarios, e. g. for when no one is home, for vacation time or for watching TV. Whether it be information, settings, timer, automation or weather – the functions of the EBOX are practically inexhaustible.
ESYLUX GMBH presents the first KNX-compatible DALI lighting system in the form of a new design of the NOVA system solution. A KNX module directly integrated in the master lights permits seamless integration in KNX building automation systems and means that there is no need to install a separate gateway. This allows the master lights – and in turn, the entire system – to be conveniently controlled and read out from a central control point. As you would expect, the master lights, together with the slave lights, provide constant lighting control based on the amount of natural light. At higher configuration levels, the lights emit biologically effective lighting using ESYLUX’s SymbiLogic technology.
The elegant FLAT presence detectors from ESYLUX are now available for KNX systems – in all colours and shapes and with a glass cover on request. Two separate output channels are used for lighting control. In semiautomatic mode, these channels can also be controlled separately using an external KNX button. If no one is present, the detectors are able to initiate an orientation light which can either be activated permanently or with a switchoff delay time. To enable energy-efficient switching of HVAC devices, a presence signal can be sent to the KNX system via an additional output channel. The detectors can be combined and then configured as either a master or a slave.
The new KNX 4-channel dimming actuator from EVN is most suitable for LED-Unicolor applications. Due to its compact design, it offers a variety of application possibilities for different kinds of use. It allows various functions such as for example relative/absolute dimming, status report/failure report, 15 scenes for selecting, staircase lighting timer function, BUS recovery and reset function, selecting the present value or modification, switching/relative dimming via manual buttons. Furthermore the actuator has various safety functions such as for example short circuit/over-voltage/overtemperature protection available.
EXOR International eSMART Series are advanced KNX HMI devices for a flexible and lightweight solution in building automation. The products have been designed for budget home control. The support of KNX IP and other protocols with JMobile efficient gateway capability is a bonus for integration. The compact mechanical size results in an easier installation in a home or building environment. With the availability of OPC UA server and client, the product is IoT ready. Ready for wall mounting. Display size 4.3", 7" and 10.1".
EXOR International eBIS513 is an advanced KNX HMI device combining top performance with an outstanding design. The eBIS513 features a 13"3 widescreen TFT display with 1280 x 800 pixel (WXGA) resolution. JMobile, Exor International’s software platform for monitoring and control, offers an innovative and efficient solution for the new requirements in home automation. The product supports the KNX protocol with IP and TP interfaces. Additionally the product adds support for the new OPC UA standard, both server and client and BACnet network (MS/TP and IP). The native gateway capability of JMobile makes this device a natural way to implement a IoT-level integration with the home and building control systems.
FS Cables KNX cable has been approved by London Underground for use on their transport system. Similar in construction to the standard two pair green cable, the LU version has undergone extensive redesign to meet the requirements of LUL 1-085 A3:2011 and is now suitable for installations in stations covered by Section 12, having been independently tested by BRE and 4-Rail Services. It is clearly identified from the standard cable with a white stripe along the jacket and comes with full batch traceability. Available from stock, the cable is held on 100 m, 200 m or 500 m reels and cut to length. We offer a nationwide next day delivery service as well as same-day deliveries into central London.
The AQUA 3000 open water management system allows operators of large drinking water installation systems to enhance their efficiency in terms of both water and energy consumption. The goal is to achieve the best possible level of drinking water hygiene at every withdrawal point in the building. Limited resources are conserved and therefore CO2 emissions are not produced. The Ethernet CAN coupler (ECC2) with an integrated web server and two supplementary modules helps with mobile controlling and monitoring of the entire drinking water installation inside the building.
Fully realised with plate glass, commands, touch type, circular slider, rear projection display and RGB LED, THERMO ICE KNX allows you to manage heating / cooling systems in a 2- or 4-way system, using algorithms of two-point control, proportional-integral control and fan coil. If combined with a humidity outdoor sensor, it enables a system for humidification / dehumidification to be managed. It includes temperature and proximity sensors as well as two inputs for potential-free contacts (window contact, temperature sensor NTC external, etc.). Available in white, black and titanium, it can be implemented either in KNX systems or KNX Easy systems. Suitable for round, square and rectangular boxes.
The new GEZE interface module IQ box KNX allows GEZE IQ window drives to be directly incorporated in KNX building systems. Thus enabling a dialogue with other KNX-enabled components, such as push buttons and sensors. For example, all windows in a building can be closed at the touch of a button – simply and efficiently. If a sensor reports rain or increased CO2 levels, the intelligent GEZE window drivers receive a signal to open or close via the IQ box KNX. The box also supplies the building management system with exact information about the drives – e. g. opening width, window position or any faults.
The Gira X1 is the simple and cost-efficient way to achieve an intelligent home with a KNX system. It can do all the things that are necessary and practical in a single-family home: switching lights on and off, activating light scenes, controlling blinds, setting a comfortable temperature and visualising the various functions – inside the building or remotely via the app. The X1 can be rapidly and easily installed on a DIN-rail and quickly parameterised by an electrician. Functions such as device-less logic simulation and the ability to set up or maintain the project remotely via Internet and VPN accelerate the start-up process and reduce costs for the customer.
Gira KNX RF uses 100 % of the universal KNX standard “KNX RF1. R S-Mode”; it allows access to the full functionality of the KNX system. This means that all KNX products available on the market can be seamlessly integrated into the system. Another advantage is that the KNX system with coupled wireless connection reduces the wiring effort considerably if the last routes are bridged to the KNX devices in each room wirelessly. This saves time and therefore expense. Via the KNX RF USB data interface in the form of a USB key the electrician can access a KNX installation wirelessly via radio from a PC or laptop, for addressing, programming and diagnosing via ETS5.
The dimmer with LED constant current can drive the LED directly, has four independent channels and two independent outputs. The output current of each channel can be set via the linked switch button and can produce 350 mA / 700 mA or 700 mA / 1 A. When the output current exceeds the rated current of the load, the load will probably burn out and cannot use a 700 mA output to drive 350 mA LED. In the case of a full load, if all LED are 350 mA, the dimmer can output eight fold, but if some LED are 700 mA or 1 A, it cannot output eight fold in certain configurations and the LED cannot reach the expected brightness value.
Hager’s KNX pulse gateways TXE771 and TXE773 with one or three channels can be connected to any mechanical electricity, water, gas or heat meter using the S0 interface in accordance with DIN 43864. The devices convert the analogue pulse values into digital KNX telegrams and transmit them at intervals specified between one minute and 24 hours to e. g. a KNX server.The programming of the device can be carried out using either the ETS or the easy configuration tool. Thanks to its waterproof IP44 housing and an operating temperature ranging from -20°C to +55°C, assembly is also possible in damp locations or outside.
With the easy system, Hager provides the latest in simplicity for implementation of smart homes with the KNX standard. The system consists of the TXA100 commissioning case with configuration server and WLAN adapter, the free easy App, a comprehensive set of actuators and the new Berker sensors. The way it works: The server is connected via bus terminals to the KNX installation and via the WLAN adapter to a tablet, smartphone or PC. The App is then used to configure by drag and drop up to 255 Twisted Pair components, and as many KNX radio components (RF), and to label them with clear names – the domovea visualisation is then also ready.
The M/4.20.1, M/8.20.1, M/12.20.1 and M/16.20.1 expansion switch actuators all feature current detection technology and fully comply with EU safety standards as well as with KNX. Capable of single channel current reporting, total current reporting and dual current threshold control, the HDL range of channel switching expansion actuators with current detection precisely combine form and function into a singularly unique package. For effective current detection three modes are available, these being automatic mode, trigger mode and comparison mode. The current report generated by the modules supports 2-byte and 4-byte floating point type data types.
HDL KNX sensor -M/WS05.1 includes four independent logic blocks and one combined logic block. Each logic block is combined with the condition of microwave sensor, lux, temperature, humidity, dry contact, external telegram value. Logical relationship for AND or OR switch, absolute dimming, shutter, alarm, percentage, sequence, scene, string (14 bytes) can be used as a control function. The sensor can be configured as the master and slave mode; it can report the current status of every condition, in order to adapt to different environmental requirements.
The air quality sensor (AQS) GS 41.00 KNX offers detection of the air quality (CO2 concentration compensated by atmospheric pressure, temperature, relative humidity) as well as air quality control functions. The sensors are commonly found in office buildings, schools and private homes. Due to wall-mounted housing, ideal sensor positioning is possible. In addition, the two-part device setup guarantees a simple installation. Manual adjustment of the setpoint temperature (range: +/- 3°C) is available via the integrated touch panel. Various options and parameters within the ETS application offer adaption to multiple solutions.
Iddero presents the new MURA IP door station: An elegant, robust door intercom unit that provides full colour video and high-quality digital audio over IP, allowing users to talk to the visitor at their door from a dedicated indoor monitor, a standard SIP (VoIP) phone, or a smartphone or tablet. Together with Iddero’s HCx-KNX touch panels, the MURA IP door station provides a solution that fully integrates IP door communications into any KNX installation. The door phone events function makes it possible to trigger actions – such as opening the door – with KNX telegrams, or to receive KNX notifications in response to events such as the reception of an incoming call. Available in multiple configurations.
Idderocloud is Iddero’s new cloud-based remote access service. Idderocloud lets users control their Iddero KNX devices remotely from anywhere, without the need for fixed IP addresses or external DynDNS services, and without interfering with the home router’s configuration. The service is available for IP-enabled Iddero devices, and can be set up in a matter of minutes. Once enabled, transparent remote access is possible from any location using a smartphone or tablet (Android, iOS, etc.) or through standard PC web browsers, as long as an Internet connection is available. All communications are fully encrypted and 100 % secure. The idderocloud service is provided completely free of charge.
IntesisBox® adds to its portfolio the DK-RC-KNX-1i gateway, expanding its range of products for the integration of Daikin’s air conditioning products. The new gateway, like the current DK-RC-KNX-1, allows you to control and monitor all the air conditioner’s operating parameters from KNX in an entirely bi-directional way. The main novelty is that the DK-RC-KNX-1i incorporates four binary inputs that will allow KNX integrators to integrate different external devices into their home automation projects. These binary inputs can develop four standard KNX functions such as switching, regulation, shutter control and value sending. In addition, they enable three internal functions to be executed from the own gateway.
IntesisBox presents the IS-IR-KNX-1, compatible with more than 40 different air conditioner brands. This gateway stands out as the only one in the market that offers control and monitoring of the system. The device is installed next to the air conditioner and sends commands using infrared codes. Thanks to a built-in infrared receiver, it can also capture the changes made by the user through their own AC IR remote controller and show them in KNX. Another feature of this gateway is its easy configuration, carried out through ETS using a simple plug-in. This configuration can be downloaded via USB or via KNX TP1. Moreover, the IS-IR-KNX-1 is powered directly from the KNX bus.
With Power Block, IPAS presents for the first time 16 AC load switch actuators with 8 and 16 outputs in a DIN-rail enclosure. The Power Block actuator series stands out due to its compact format and the extremely powerful application. In addition to numerous parameters defining individual functions or switch outputs, alarm, time, scene and regulator functions can also be activated in the application. These can be used independently of the configuration of the outputs. The switch outputs can be configured individually as binary or shutter outputs.
It’s a solution for the fast setup of KNX projects with no programming. To control equipment, download i3 lite from the Apple Store or Google Play and import your ETS project or configure it via Weinzierl 771 / 772 / 777. Next, create the floors, rooms and add control modules to different zones. A graphic interface is created automatically. The project is ready to use. You can create routines and schedules of equipment. If necessary, your customers can add A / V and IoT gadgets to the project. iRidium lite can be used with the iRidium server to collect, store and process data, compile trends, run routines and logic functions 24 / 7. iRidium lite enables the control of KNX equipment combined with other automation systems, A / V and IoT gadgets.
iRidium lite is a solution for fast project setup, part of iRidium 3.0 – platform to control the smart home: professional automation equipment, including KNX, A/V equipment and IoT gadgets. An automation project is configured directly on a control panel - the users’ favourite mobile device. Automatic device search finds all equipment available to control in the network. Control modules for the equipment are downloaded from the store and the graphic interface is ready to use. A project is given to the user via iRidium Cloud. Users themselves can create scenes and schedules of equipment. For convenience, iRidium lite can be used in two modes: online and offline with optional iRidium Server working 24/7.
The new “Remote Access” is the revised version of the “ise smart connect KNX Secure”. The easy-to-install secure remote access is not only a significant assistance for the electrical installer and a cost reduction for parameterisation and maintenance. Customers also benefit from the significant advantages of remote access. In addition to access control and access to cameras and web-based visualisations, the gateway has been extended by a notification system. Now messages can be sent directly via individual rules from the KNX as an email (with attachment), SMS or voice call.
ise Individuelle Software-Entwicklung GmbH (Germany)World’s first KNX connection for Axis IP products
From now on, the ise smart app KNX Axis connects to the KNX building system technology with the extensive IP portfolio of Axis Communications. Benefit from both systems, such as the KNX motion detector that starts close to the light as well as the recording of the camera when there is movement. Use the detection of the camera (even through glass) to see whether objects move (Motion Detection) or virtual line crossing (Cross Line Detection) and trigger scenes in KNX. Other third-party applications, which are also installed on the camera, can also be used to provide numerous other possibilities.
KNbriX from ITK Engineering links smart home solutions with the KNX bus and works to achieve a fast integration of components and functions. The KNX Stack is available in two editions: the basic version serves as a gateway solution. KNbriX Plus is a single chip solution for both application and stack. The user-friendly form of the API allows for smooth communication between the client application and the KNX Stack from ITK. Both make up the perfect core package for development of KNX devices from small to large quantities within very short development timeframes.
With the new CHROMOFLEX PRO KNX CC Barthelme LED Solutions offers users a comfortable LED management with constant current as an alternative to the controller version with constant voltage. The new KNX controller can be operated with adjustable currents up to 1050 mA per channel. Maximum safety is ensured with integrated protection against short-circuits, reverse polarity, overloading and overheating. The associated ETS software enables simple and intuitive handling in a variety of applications for 1 – 4 channel light solutions. Suitable CHROMOFLEX KNX software libraries are freely available on the Barthelme website.
Legrand presents its new flush-mounted KNX temperature control panel: a 1.6" backlit display with four push buttons embedding a temperature probe. Used in combination with a KNX HVAC controller, it can manage different types of heating/cooling systems (FCU, heating/cooling valve, electric load, etc.) to display the ambient temperature, adjust the temperature setpoint and/or fan speed, select the operating mode. Especially designed for hotels, several catalogue items are available in line with the Legrand and Bticino aesthetic finishes (Arteor, Valena Life, Valena Allure, Axolute and Living Light). Data to be displayed and action from push buttons may be set to meet specific requirements.
The New LC-A0816 is a multi-function 8-channel actuator, programmable with ETS to perform different tasks like switching loads, open and close shutters and blinds, drive valves operating in PWM and control two or four pipe fan coils. Each output uses bitable relays with 16 A maximal load. Block terminals are very wide to insert wires with a section up to 5 mm². The relays can be operated manually via a push button mounted on the front of the device, a green LED indicates the switching status of each channel. The power supply is provided from the KNX bus through TPUART2 that provides better performance in terms of switching speed. The protection class of the package is IP20 and it is designed for installation on DIN 35 mm.
Lithoss upgraded its KNX switch in combination with an interface towards a fully integrated KNX switch. The Lithoss integrated KNX switch is available in the well-known stylish Lithoss Select finishes. Finishes that generate a striking effect in both traditional and ultramodern interiors. Features: fully integrated KNX sensor, individual RGB LED feedback for each button, 4-8-12 button solutions, integrated temperature sensor, 1 bit commands: on/ off toggle with short/long press, 1 byte commands (0 – 255/HVAC/value %), orientation light led function, connect external temperature sensor, sequences with different group addresses, scene management and easy setup (compatible with ETS4 and ETS5).
The LOYTEC Universal Gateway LGATE-902 with integrated graphical visualisation concurrently integrates KNX and several other systems. It also comes with two 100Base-T-Ethernet ports that can be operated in switch mode. A built-in firewall, a web interface for device configuration using HTTPS and separate IP networks on the two Ethernet ports (LAN and WAN) ensure network security. Local operation and override is provided by the built-in jog dial and the backlit display (128 x 64 pixels). L-GATE also supports connectivity to WLAN and MESH networks via LWLAN-800 interface and connection to EnOcean wireless devices via LENO-80x interface.
The five second installation: This product offers a fast installation with a very discrete and well-designed appearance. It is one product out of an identical family. If you know one product, you can handle all installation situations. The product family offers spring clips, flush mounting, surface mounting IP20 to IP55. Functionality focused on lighting control and presence detection. To facilitate the commissioning, the functionality is optimised for on / off or daylight control with a wide variety of applications such as manual override, standby light, presence detection, lightscenes and run time configuration of time and lux value.
The new series of MDT Shutter Actuators has been enhanced with extensive functions. These functions are: Integrated logical functions for window contacts (open / tilt) with practical ventilation function; automatic sun protection / slat guidance with sun protection calculation; plain text diagnosis with 14 byte Group Object; enhanced block functions. Each channel can be parameterised individually. Status response, block functions, central switch functions and functions for calibrating and positioning can be selected. It is possible to create eight scenes per channel and the behaviour in event of bus voltage failure or recovery is adjustable.
The redundant MDT bus power supply has two integrated power supplies to increase the operation reliability if power, a fuse or one integrated power supply fails. This prevents loss times on the KNX site for the customer. The integrated controller with diagnostics function monitors group addresses, bus voltage, bus current, temperature, overload, bus traffic and all devices inside the KNX line by their physical address. If a device fails a message is released. Events like mains voltage failure/return are stored in a ring buffer.
The new KNX visualisation EiVisu4 is free of charge for all KNX users who make their ETS projects with the Nautibus ETS App EiPLAN. EiVisu enables display and operation of a KNX system in a floor plan view. Lighting, heating, blinds and energy monitoring are supported. Moreover EiVisu can generate log files and send e-mails. EiVisu runs on a Windows 10 PC or tablet and can be connected via USB or routing to the KNX bus. And the best part is: the visualisation is already finished if you have created your ETS project with EiPLAN.
The XLogic Editor is a graphical editor for implementing logics within the NETx BMS Server. Via these logics new control functions can be added and existing data can be extended. Following functions are available: • reading and writing of data points • performing of mathematical operations • sending e-mails • writing of logging information • accessing the current status of the server • invoking LUA functions The user gets a number of pre-defined functional blocks provided, which cover various applications. In the latest version of the NETx BMS Server the XLogic Editor is available without extra charge.
NETxAutomation Software GmbH (Austria)New NETx BMS visualisation for modern building automation projects
With the NETx BMS visualisation, the further development of NETx Voyager visualisation will be launched in 2017. The NETx BMS visualisation is part of the NETx BMS solution and impresses with numerous new features, such as configurable pages / groups and objects with variables, freely scalable view / pages, new button mode for XLogic functions and long / short click or secure server client communication thanks to TLS. Multiple pages and screens are also possible with the new visualisation. In addition, the user is free to choose between PC or web-based visualisation.
NETxAutomation Software GmbH (Austria)NETx BMS Server allows KNX project extension by access control systems
The NETx BMS Server offers new interfaces to access control systems VingCard, Kaba and Salto. Thereby an extension of KNX projects by the information of the above mentioned systems is possible. The NETx BMS Server retrieves the data from access control systems and forwards it to any clients for further processing. The Server supports the exchange of data between different fieldbus technologies and applicationspecific systems, whereby sophisticated building automation projects can be realised effectively.
ON SEMICONDUCTOR hat drei neue KNX Controller in den Markt eingeführt: NCN5121 und NCN5130 beinhalten den KNX Physical und MAC layer, NCN5110 ist ein rein analoger Bit Transceiver. Die neuen Eigenschaften umfassen einen festen 3,3V und einen programmierbaren 1,2-21V DC-DC Controller, einen analogen Signalüberwachungsausgang, die Option in der Anwendung einen Quarz zu verwenden sowie eine exzellente Energieeffizienz durch eine urheberrechtlich geschütztes Verfahren zur Energierückgewinnung. Für den Busankoppler ist nur noch ein Kondensator von 27µF erforderlich. Die NCN5130 DC-DC Controller können bis zu 100mA ziehen, der gesamte zulässige Busstrom ist auf 40mA erhöht. Alle Teile sind in einem 6x6 QFN-40 Pin Gehäuse verfügbar und haben einen Sperrschicht-Temperaturbereich von -40 bis 125°. Evaluationsboards mit Bedienungsanleitung und Dokumentation sind verfügbar.
Streaming, lighting, energy and climate management, air quality and video surveillance – the KNX-based, comfort touch panel Controlpro, built by PEAKnx – the experts for intelligent building controls – transforms houses into individual homes. The Controlpro stands out with a quad-core processor, open software architecture based on Windows 10 Pro and a variable front panel design. Houses become multimedia centres: surfing, installing apps, watching TV, listening to music – the panel is a full computer running all Windows 8 and 10 applications.
Progea recently showcased the long awaited preview of the latest Movicon.NExT 3.0 release to offer users a cutting-edge product that features the most innovative technology and maximum usability. This version undoubtedly exalts the already renowned product for its superior quality. Movicon.NExT, based on the Automation Platform.NexT technology, is the modular.NET platform designed to make industrial software more open and scalable. This has been achieved by integrating functional modules that are capable of managing all enterprise-wide business needs from supervision to control, Historian modules, MES and industrial analysis.
The TFT is connected to the bus via the KNX connection terminals and need a 30 V DC additional supply voltage to assign the Individual Address and configure the software parameter settings and to update the data directly through an SD card. The TFT functions are summarised as follows: 1. capacitive touch screen, TFT colour display; 2. switching, scenes, dimming, curtain control, intelligent scene control and other control functions 3. time and date display 4. screensaver options: clock, electronic photo album, gradient black or do not use; 5. configuration of the database through the PC software and updating data directly via an SD card and 6. customising the setting of the main interfaces
Audiofy, the powerful, integrated, multiroom professional audio system now includes ThinKnx supervision functionalities. Just with a dedicated plug-in, you can now have complete control of KNX plants and of all the integrated devices even from other technologies. like every ThinKnx server. Controlled by a complete set of native apps, Audiofy streams music content from internal players (which can play all the most diffused digital audio format from DLNA and UPnP Media server, Spotify, AirPlay etc.) or from analogue stereo inputs towards up to 16 rooms, allowing the end user to manage the routing of audio sources directly from his smartphone / tablet or KNX.
Thinknx products family is growing with the new line of all-in-one touch servers. Envision devices combine the comfort of a first-class touch panel running a customised user design with all the powerful features of a Thinknx server. Each Envision touch server is characterised by stylish high-quality materials: the screen with very high resolution and brightness grants an optimal user experience and enhances the richness of the customised graphics created with Thinknx Configurator. The anodised aluminum frame, available in four different colours, permits a perfect accommodation to the location where Envision will be installed.
The KNX Edge is a modern, secure interface between the KNX network and the rest of the world. At its core, it supports the KNXnet/IP protocol, with up to 100 concurrent tunnelling connections. Secure end-to-end remote access (including programming with the ETS) is included with the KNX Anywhere cloud service. Individual connections can be configured via the firewall service. Also included: KNXnet/IP secure. Web ready (management app, web services). Group object data cache. Configured for guaranteed automatic security updates (manual updates possible).
With the new KNX Gateway, the powerful multi-user audio system from Revox becomes part of the primary building automation system. Using the KNX Gateway, the Revox multi-user system can be controlled via KNX and vice-versa. The KNX Gateway has a powerful ETS database that can be downloaded from the Revox website. In the standard configuration the gateway operates a maximum of ten rooms with up to 50 commands each including feedback. The Gateway is housed in a 2 HP wide built-in enclosure. It can be operated with PoE, 12 –2 4 V AC or 12 – 30 V DC and is connected to the KNX system with a two-core cable.
The KNX LED dimmer 80120 is used for 1 – 4 colour 24 V DC LED lighting strips and has an integrated power supply for up to 100 W. The intelligent load identification system distributes the total channel output depending on the occupancy. With the extensive application file, various types of regulation and switching behaviour such as relative / absolute dimming, soft dimming function, 60 scenes, six colour sequences and colour circle function are possible. The device also has features and safety elements like reset function, short circuit / overvoltage protection and overtemperature protection. Due to its compact design, it is suitable for a variety of installation situations.
The new ekinex® EK-ED2-TP pushbuttons are KNX devices for switching loads, dimming lighting devices, controlling shutters or other programmable functions. Thanks to the integrated temperature sensor, the device can be configured to work also as a room temperature controller. The push buttons can be completed with square or rectangular rockers; in addition to plastic and aluminum, Fenix NTM® is now available – an innovative nanotech material with outstanding features. Two LED (blue / green or white / red) for each channel are programmable as status feedback or orientation light. The devices are designed for wall installation in a flush mounting box and are equipped with an integrated KNX bus communication module.
EK-IA1-TP is a freely programmable PLC equipped with a KNX interface that supports all the KNX communication objects. It is programmed in the CODESYS® development environment which provides several programming languages according to IEC 61131-3. A dedicated configuration tool allows the mapping of the objects defined in an ETS® project and the realisation of complex logical blocks. Libraries are available for the realisation of complex functions in an easy and intuitive way. The device receives telegrams from the bus sent by KNX devices and sends telegrams on the bus after the processing of the previously programmed logical sequences.
The U.motion touch panels put an elegant frame around the visualisation. The ultra-slim Android-based 7 inch touch panel is now powered with Android 4.2. It is compatible with many apps on the market and can be used in combination with U.motion servers, homeLYnk, spaceLYnk or InSideControl, through dedicated apps. This complete solution is especially interesting with the new firmware of homeLYnk and spaceLYnk. Now the end user can use the same interface at home and anywhere in the world using smartphones, tablets and touch screens.
New: Merten KNX/DALI-Gateway MEG6725-0001 supports DT8 tunable white and colour control. Tunable white enables the change between warm white and cold white. This can be used to enhance the feeling of well-being (Human Centric Lighting). Additionally RGBW and XY control format is supported. The typical application for these formats is improved product presentation – making fruit look good in a supermarket etc. or to attract attention to an advertisement. A new timer enables the smooth change of brightness and colour for all three formats. A firmware upgrade is available to upgrade older devices.
KNX Multitouch Pro is an innovative touch interface to control temperature, blinds and lighting. Vertical or rotary visual design. The device recognises the direction of movement of the hand and activates one function without touching the device. No additional power supply. KNX Pushbutton Pro is a flexible device including one, two, three or four configurable by ETS. The selectable backlight symbols are visible by proximity with two colours available. New ‘Express’ settings to simplify the commissioning. Available in System M and System Design ranges.
ELECTRIC homeLYnk/spaceLYnk are multi-protocol (KNX, other systems) logic controllers to create KNX smart home and smart building solutions. They are web servers to design customisable user interfaces accessible through smartphone/tablet/PC to allow IoT integration (Sonos, IFTTT,...) and cloud-based secured remote access and data service. Customer can design stand-alone lighting control and energy management solutions (monitoring and control) or integrated through BACnet in BMS for high performance building Class A.
The new KNX push buttons are available with two, four, six, or eight button surfaces, which are arranged vertically and can be used in pairs or as individual button surfaces. The device provides extensive functions including switching and dimming (absolute or relative), lightscene control, blind and shutter control and room thermostat control which are freely configurable with ETS to any button. The push buttons fit in 55 mm systems with direct connection to the KNX bus and are powered by the KNX bus.
The SR-KNX9501FA is a DIN rail mounted LED dimmer with four independent output channels and KNX bus connection terminal to connect to KNX. The input voltage range is DC 12 V – 36 V, and each of the four channels can output 5 A with a total combined output current of 20 A. Designed with short-circuit protection, overvoltage and overtemperature protection, the dimmer features great safety and reliability. With built-in 1 data bit, 4 data bit and 8 data bit control, the dimmer offers switching, relative dimming, absolute dimming, scene control, staircase lighting, preset value or modifying preset value, status report and bus recovery functions for LED lights.
With the new application program “000131” for line and backbone coupler N 140/_3, it is now possible with ETS4/5 to set the “filter” function for the Main Groups 16 to 31, also for devices that have already been installed. The Group Address based communication on the KNX bus can thus be optimised. Additionally, the new blocking function of individually addressed telegrams provides increased protection against sabotage. If the transmission of these telegrams is blocked at the Line Coupler e. g. from main line to the line, then the commissioning of these devices is only possible within the line. The described function is also available for IP router N 146/02.
Besides automation functions the IP Control Centers offers the customer an intuitive, fully graphical visualisation of a KNX system via web based end devices. Thanks to the Smart Editor a tailored design visualisation for smart phones or tablets can be made quickly and easily. Powerful application modules like an annual schedule program, data recording, trend chart presentation, scene and event control, logic functions and an alarm module are integrated. The alarm list or recorded data can be sent via email. Additionally, various multi-media applications can be controlled with IP commands via an IP Interface.
Synco IC ist ein cloudbasiertes System, welches von überall und jederzeit eine komplette Anlagenübersicht auf mobile Endgeräte, Tablets oder PC bietet. Per Fernzugriff reduziert sich der Serviceaufwand und verbessert die energieeffiziente Nutzung. Ein Gebäude zu verbinden, ist leicht und dauert nur wenige Minuten. Die Konfiguration des Systems kann ebenso wie Servicearbeiten per Fernzugriff erfolgen und die verteilten Liegenschaften lassen sich zentral steuern. Auf einen Blick sind die wichtigsten Informationen über die Anlage zu sehen und erlauben dem Anwender die Einstellungen mit einem Mausklick schnell zu korrigieren.
The Gamma instabus KNX product portfolio has been extended with new UL-certified products and thus enables complete solutions for the UL/NEMA market. The new products are installed in distributed 4 x 4 inch junction boxes and the KNX cable is connected via bus terminals. Devices are offered for intelligent room lighting, including state-ofthe- art light switches and dimmers, as well as for sun protection, such as blinds and shutters. This means customers are provided with a complete range of Gamma instabus surface-mounted devices – from smart terminal boxes and the bus coupling unit to integration of switches from the i-system and Delta style lines.
SIN.EQRTUEVO1T is a web server with an integrated data logger to acquire data from sinapsitech℗ smart repeaters, which collects information from devices that use wireless M-Bus protocol such as meters, heat cost allocators, digital and analogue I/O, probes. It also integrates a 20-device M-Bus port for wired applications. SIN.EQRTUEVO1T is SSL compliant and can manage up to 500 meters providing storage of daily readings for 10 years. The web interface allows report generation, M-Bus network setup and I/O management. The B.M.S. version allows a simple integration into most complete and complex building automation systems, making communication available via TCP / IP in KNX and other protocols.
Thanks to the universal radio receiver, commands from the Somfy RTS remotes can conveniently be transmitted to the KNX bus network for integration with any application. The receiver enables the control of any shading application, any switch function, lighting, dimming, heating, cooling, or ventilation via the same wireless RTS remote control. Up to ten universal radio inputs with max. five transmitters can be used per input. The device is powered over the KNX bus network. The RTS receiver for 447 MHz is available in 2 / 2017 while the 433 MHz variant will follow Q3 / 2017.
The IS 3360 KNX infrared motion detector from STEINEL PROFESSIONAL watches over more than 1,000 m2 of space in large buildings, multi-storey car parks and indoor facilities. Providing a 360 degree angle of coverage, it ensures precision detection of any movement within a range of 20 m from a height of up to 4 m. Designed either for concealed or surface-mounted installation, it is available with a square or round enclosure for maximum versatility. Giving a range of user-friendly functions, it can be integrated into any chosen KNX installation with effortless ease.
World first in modernisation: existing buildings are quickly brought up-to-date with the IR 180 UNIVERSAL KNX infrared sensor switch from Steinel Professional. Suitable for use in standard 2-wire systems, it is ideal for modernising existing electrical installations. The IR 180 UNIVERSAL KNX with a 180-degree angle of coverage and 20 m reach has a SuperCap energy storage system. Electrical isolation of the cable via a relay prevents interference from leakage currents. As a result, it can also switch LED lamps without any flickering as and when they are needed. Temperature and air humidity readings can also be transmitted.
TAPKO TECHNOLOGIES TAPKO’s TP USB interface device UIM-KNX 42 enables addressing of every device in a KNX bus system with no extra application program required. It provides a PC / KNX data connection for commissioning, visualisation, protocolling and diagnosis. Via cEMI protocol, any software based on Falcon can use the UIM-KNX 42 for communication with other bus devices. Due to USB HID profile support, no specific USB driver is required. The UIM-KNX 42 supports long frames as well as a special diagnostic mode. To be ready for KNX Data Security, it is mandatory for a USB TP interface device to support long telegrams.
The TAPKO IPS640 outperforms competitors on both efficiency and size, delivering the same power performance at half the usual footprint. The slimmest on the market at only 2 modules (35 mm), this intelligent 640 mA KNX power supply minimises costs as more KNX devices can be mounted on a single DIN rail. A user interface shows extensive diagnostic information (e. g. voltage, current, overload) that improves flexibility and usability via an additional KNX node. Remote-controlled functions, such as resetting a line, are integrated and all functions can be controlled/fine-tuned using a set of parameters. Also available as OEM.
The new touch panel pureKNX-line7 completes the pureKNX family. Functionally it is oriented on the KNX base unit. Thanks to its glass touch-sensitive surface, it also convinces with its high-quality design. The system-wide operating concept “easy smart home” is simple and clear: four touch zones in the corners, a touchpad at the centre and a control ring for dimming or setting the room temperature. The functions of the individual control interfaces are freely parameterisable. Thanks to mobile apps for Android and iOS, the visualisation via smartphone can be operated with the same “look and feel”. Through the simultaneous use of touch panels and mobile devices, users enjoy the benefits of both worlds even globally.
The pureKNX switch is a touch switch and complements the pureKNX series of tci. Across the series it represents the simple but clear operating concept: four button areas in the corners, a touch area in the centre and a control ring, for dimming or setting the room temperature. The function of each operating zone is freely parameterisable. For a high level of operational safety different confirmations are possible: optical (color change), acoustic (clicking sound) or tangible (vibration). To match the interior the touch switches are available in black, white or in individual colours (RAL).
TENSE TOP DESIGN SWITCHES has launched an innovative built-on motion detector which combines functionality and an elegant design in a beautiful way. Thanks to its discrete housing, you can easily install the built-on motion detector on walls, plasterboard and concrete. Furthermore, this product is waterproof so this motion detector can be mounted outside as well. This product is available in white. But do you have a dark ceiling or wall? Do not worry, then just use the black variant. This built-on motion detector has a subtle cylindrical design due to its 30 x 73 mm dimensions. And it will create a uniform look in a project. In short, this design product offers every comfort and convenience to the customer.
TENSE has launched three types of iPad frames in eight metal finishes: flush-mounted with colour LED background light, flush-mounted without background light, wall-mounted, easy to install, very stylish, highly innovative and first-class design.
Two field buses, one installation – the connection inbetween is this little box, which enables the bidirectional exchange of data between the OT boiler and the heat distribution via the KNX system. The KNX-OT-Box S allows demand-oriented and weather-compensated flow control, control of domestic hot water, and much more. It even provides a legionella protection program. As practical as with the MIX2 actuators: Also here, the KNX bus module can be removed, replaced and programmed, independently of the device.
The KNX IP router from Theben connects the KNX network with Ethernet, and thereby provides convenient access from the PC to the KNX network. It indicates power failures on the KNX bus (KNX IP service) and allows firmware updates. Via Unicast, up to ten devices can communicate with each other. For visualisations etc., five tunnelling servers are available. Power supply is available via bus voltage or via PoE. The KNX IP router can be used as an interface or as a line coupler. The IP router supports the complete filter table for all main groups.
The KNX/DALI Gateway combines the DALI protocol of digital lighting control with the building automation across rooms. It controls up to 64 operating units with DALI interface and assigns a DALI address to each DALI participant. The DALI participants can be combined in up to 16 groups of lights, and be controlled via KNX, individually or via scenes. Which lamps shine full of ambience at which brightness, or in which RGB colour – all this can be controlled via the KNX/DALI Gateway.
Sense is the latest release by Vitrum Design, the light switch which combines innovative, recyclable materials and contemporary touch technology. Shape, light and sound get together to create an unprecedented user experience: the buttons’ design encourages the most natural action of the fingers on the commands, while all gestures are followed by the feedback of the luminous circle and the sound which confirms the execution of the command and the system’s state (ON/OFF mode). Sense can be used not only to control lighting, but also home technology such as blinds and heating. The device is easy to install on standard commercial wall boxes and is fully compatible with KNX and many other systems.
Thinka connects KNX to Apple Homekit allowing home owners to interface their home in new and exciting ways, such as Siri, geofences and Touch Id. Configuration is done by importing an ETS4 of ETS5 project file. Using the Thinka setup app from the Appstore, home owners can very easily configure Homekit on their iPhone or iPad. Accessories can be renamed for better Siri performance and can be moved to different rooms. A home owner can use the app to create zones and scenes as well. Some examples of Siri are: “turn off all lights in the living room”, “turn on the coffee machine”, “set the kitchen light brighter” or “activate good morning”.
This release focuses on intuitive blind and slat control using sliders and a modern graphical user interface for HVAC functions with individual presets and scheduling. Currently 12 common thermostat manufacturers are supported directly. Light and multimedia scenes can be fully customised by the user. Multimedia zones can be controlled using a text display and keypads. For advanced integration modules for text messages, ntp time master, logic and generic communication are available.
trivum technologies expands its FLEX series. The new SC044 Multiroom Player offers four line-in, a 4-way FM tuner and four independent streaming clients for four zones. The trick: an extra subwoofer output and trigger port for each output, for driving external amplifiers for even richer sound. The mounting is very easy and can be done both on the ceiling, wall or shelf. The SC044 can be controlled via the trivum 7" TouchPad, the trivum app, a web browser or via the KNX environment in which the SC044 can be integrated bidirectionally. With the new SC044 the new MusicCenter v9 software is delivered. Easier to use, easier configuration and numerous new features make the new software generation a must-have.
Through its high-resolution colour graphic display, the intelligent room controller “u::Lux Switch” operates networked building technology in an individual and comfortable way. Four haptic keys with pressure point and RGB-LEDs ensure an intuitive operating experience. The switch is configurable without plug-in directly in ETS, additional components are not required. Thanks to the KNX-TP connection the “u::Lux Switch” can be easily and timeeffectively integrated into the standardised KNX system, even in demanding projects. It’s combinable with nearly all conventional 55 mm switch ranges and will be available from 3rd quarter of 2016.
Memo KNX can manage events depending on time and geographical position. This time switch, in three DIN rail housing (54 mm), operates up to nine relay outputs (one inside the product, up to eight in additional devices RX4) and can be connected to a GPS receiver (GEO-1) to get the geoposition and the exact time. There is a replaceable back-up battery (ten years duration) to save date and time. Each output can be used as a time programmed output (with daily/weekly/monthly/yearly programs) or as an “astronomic” output (operation based on sunset and sunrise time calculated every day according to the geographic position). All the functions and the programming details can be integrated in KNX system by the KNX-TP connection.
The multi-room audio system Autrix now offers with the “AutrixCast” a free internet service as an extension to the MusicClientOne (integrated webradio and MP3 player). In addition to free storable favorite stations the “AutrixCast” automatically provides other channels, which are compiled by a team of music experts and updated regularly – sorted by genre. So there is something for every musical taste: whether you are looking for a new soundtrack for your fitness training or for the perfect feel-good mix – just push a button. And the handling? Simple and clear as usual. A true plug-and-play Internet radio solution – fully integrated in KNX!
The GVS Intelligent Room Controller is designed in small size and high integration level to keep the high stability and reliability of KNX systems. It is integrated with switch, dimming, shutter, fan coil control and dry contact function. Replacing the traditional RCU Room control box with it will save space and costs. It support outputs for RS485, TCP/IP, KNX and infinitely expands other functions. This actuator module can control heating, cooling, ventilation, lighting, fire or water alarm, emergency SOS button, etc. Model: AMRP-41/00.2
Alluring at first sight, the Eikon Tactil ranges make a smooth, bright glass surface come alive. And beneath this elegant material you will find the Vimar KNX transponder readers for installation outside rooms. These devices have two relays to control the door lock, a courtesy light, or for other uses. With two inputs for connecting On/Off electrical equipment (for example to control the switch for opening and closing the door, a magnetic contact for signalling windows are open or closed, ceiling pull alarm, etc.) they are supplied with a front panel with four LED, each one associated to an icon for signalling a state.
The new power units for bus systems are equipped with a decoupling coil and an auxiliary output. This provides a voltage of 30 V DC that can be used to connect an additional bus line via a decoupling coil. The power units are self-protected against short circuits (thanks to a voltage and current regulator) and ensure a power supply even in the event of brief mains failures provided they do not exceed 200 ms. It is recommended to always have a safety switch for the electric power supply circuit of devices 01500.2 and 01501.2.
Adding the new WAREMA KNX multiple actuator to the surface-mounted housing allows between two and eight sun shading drives of 24 V DC voltage or 230 V AC voltage to be controlled independently of each other. The manual override operation and activation of the KNX programming button via Bluetooth and smartphone app are innovative and unique. Another advantage: easily replaceable miniature fuses provide the optimum line protection for the connected components, guaranteeing an extra level of safety. Standard commercial (venetian blind) push buttons can be connected via integrated binary inputs.
The control system WAREMA BAline makes room automation flexible using a modular approach and allows different systems to be put together individually – based on the individual device family. The basic module KNXMCM allows the integration of WAREMA BAline into a KNX bus system. Here, up to eight BAline extension modules (MIOs) or consumers with different specific functions can be connected – for example sun shading control systems, DALI, SMI, valve controls or universal inputs. What makes this product so special is that the users can program the applications as they wish.
The KNX USB Stick 332 is a compact interface for the KNX bus. Like the new KNX USB interface 312 (DIN-rail mounted, 18 mm), the new stick supports the so-called KNX long frames. Longer telegrams speed up the download and are required for KNX security. The integrated LED show the connection status, telegram traffic as well as communication errors on the bus. The stick is compatible with the ETS® software (ETS3 or higher) and with numerous visualisations. The SDK kDrive is available for Windows and Linux to integrate the interface into its own programs. A module variant is also available for integration into the device.
The KNX PowerSupply USB 367 is a 640 mA power supply with high efficiency and a small footprint of only 4 modules (72 mm). The device features a fully integrated USB interface (connector: micro USB), bus choke and additionally provides an output for auxiliary power. The integrated KNX node monitors output current, bus voltage and the temperature in the enclosure. Furthermore, the device features logic and timer functions. The configuration is done with ETS. An easy to read OLED display on the front panel enables you to display the operating parameters locally on the device.
With the combo multifunction switch actuator, Yonnet provides control for lighting, shutters/blinds, underfloor heating and on/off valve. The product ranges is from 4-gang up to 24-gang with six different sizes available (4-, 8-, 12-, 16-, 20- and 24-gang modules). Yonnet offers good quality, very competitive prices and strong support.
Yönnet is again taking the stage with a new product which has drawn a lot of attention at ISE Amsterdam at the KNX booth and in Frankfurt during L+B. The latest self-developed product of Yonnet is a KNX switch. It is outstanding due to its brilliant design as well as its functions. Iswitch has integrated light and temperature sensors and in different button configurations from one button up to 12 buttons. There are two models: with VATN display and without. One switch offers a perfect touch sensation, so the traditional customer will be more than satisfied. In addition, the unit is only 12 mm thick.
IWAC Display is the Zennio access controller with display for hotels, which allows room access to guests through NFC or Bluetooth. Its design is printed on a high-strength tempered glass with exclusive customisation (images, icons, texts or logo) to give the desired aesthetic impression. The 2.4" backlit display shows the room number / name, an image or message when a guest is trying to access the room. IWAC Display allows each button to be selected to be used as a door bell, switch or any other action. Two outputs make it possible to open the door as well as the activation of other systems, such as the door bell. Two analogue / digital inputs are included.
Complying with minimalist aesthetics and with the control capabilities of Z41 family (up to 96 functions available), Z41 COM allows a complete communication in smart homes, thanks to the integration with Zennio GetFace® video intercom system, including microphone and loudspeakers, as well as IP cameras of several manufacturers. All these features are added to the current remote control from smartphones and tablets through the free mobile app Z41 Remote. It includes additional audio output for auto-amplified loudspeaker (not included), USB port for configuration download and unique dual Ethernet port connector to isolate two different LANs. Plug&play system without additional configurations.