Zur Startseite

Webinars

KNX Association ofrece ahora muchos webinars para informarle sobre varios asuntos relacionados con KNX. Se trata de presentaciones en directo sobre asuntos técnicos y no-técnicos que puede seguir desde su ordenador e interactuar si tiene peguntas.

Información adicional:

  • Todos los webinars son completamente gratuitos
  • Debe registrarse previamente para poder asistir al webinar.
  • Regístrese lo antes posible, siempre hay un límite de participantes.
  • Una vez registrado recibirá un enlace para poder participar.
  • Si no dispone de auriculares puede participar también por teléfono.
  • Visite esta página regularmente ya que se añaden nuevos webinars con frecuencia.

¡Esperamos poder saludarle pronto en uno de los webinars ofrecidos!

¿No le conviene el horario? Varios webinars se ofrecen también en versión grabada aquí.

Webinar type

Date

Intended for


KNX System: network topology & couplers

Agenda:
- couplers: overview, concatenations, ...
- how to optimize bus traffic
- hop count (routing counter)
- individual addresses
- TP: capacity calculation, distances, PSU, ...

Language: English

From: 24-10-2017 10:00
To: 24-10-2017 11:00


Intended for:
- Newcomers

ETS5 Professional & KNX Demonstration

In this webinar ETS Professional will be demonstrated:
- how to realize the most basic (on/off) functions
- how to use the diagnostic features

At the same time also KNX will be demonstrated:
- programming mode
- the effect of programming devices
- the object flags

Language: English

From: 24-10-2017 14:00
To: 24-10-2017 15:00


Intended for:
- Newcomers

ETS Inside & KNX Demonstration

In this webinar ETS Professional will be demonstrated:
- how to realize the most basic (on/off) functions
- how to use the group monitor

At the same time also KNX will be demonstrated:
- programming mode
- the effect of programming devices

Language: English

From: 07-11-2017 10:00
To: 07-11-2017 11:00


Intended for:
- Newcomers

Manufacturer Tool

Via this webinar you will learn about the Manufacturer Tool, which is required for KNX product development.
You also will be updated about the latest new features in order to realize the 'plug-in replacement' program.

Agenda:
- MT project details: static & dynamic part
- ETS parameter dialog
- KNX device templates
- plug-in replacement features

Language: English

From: 09-11-2017 10:00
To: 09-11-2017 11:00


Intended for:
- Developers
- Members

KNX System: communication, functions & flags

Agenda:
- how KNX devices communicate
- group objects & group addresses
- KNX device configuration
- standardized KNX building functions
- the role of the object flags
- multiple group address assignment

Language: English

From: 14-11-2017 10:00
To: 14-11-2017 11:00


Intended for:
- Newcomers

KNX System: network topology & couplers

Agenda:
- couplers: overview, concatenations, ...
- how to optimize bus traffic
- hop count (routing counter)
- individual addresses
- TP: capacity calculation, distances, PSU, ...

Language: English

From: 15-11-2017 10:00
To: 15-11-2017 11:00


Intended for:
- Newcomers

ETS5 Professional & KNX Demonstration

In this webinar ETS Professional will be demonstrated:
- how to realize the most basic (on/off) functions
- how to use the diagnostic features

At the same time also KNX will be demonstrated:
- programming mode
- the effect of programming devices
- the object flags

Language: English

From: 21-11-2017 14:00
To: 21-11-2017 15:00


Intended for:
- Newcomers

ETS Inside & KNX Demonstration

In this webinar ETS Professional will be demonstrated:
- how to realize the most basic (on/off) functions
- how to use the group monitor

At the same time also KNX will be demonstrated:
- programming mode
- the effect of programming devices

Language: English

From: 22-11-2017 14:00
To: 22-11-2017 15:00


Intended for:
- Newcomers

KNX System: telegrams & electronics

If you want to know everything about the KNX telegrams, then this is your chance.
This webinar is also the ideal preparation for the 'KNX Development: communication stack' webinar.

Agenda:
- structure and details on all telegram fields
- serial characters, timing aspects
- communication types
- TP: collission avoidance, choke, PSU, ...

Language: English

From: 28-11-2017 14:00
To: 28-11-2017 15:00


Intended for:
- Developers
- Members
- Newcomers

KNX Easy: how to set up KNX installations without ETS

E-Mode is the alternative for S-Mode. Especially KNX devices that combine E-Mode with S-Mode might lower the 'bus system threshold' significantly for potential customers and/or installers in the future. This webinar is to present you the most important aspects of E-Mode in order to get you started with the development process of E-Mode KNX products.

Agenda:
- Ctrl-Mode vs. PB-Mode
- Device identification
- Device localization

Language: English

From: 04-12-2017 10:00
To: 04-12-2017 11:00


Intended for:
- Developers
- Members