Motor Controller 4DC KNX WM AC

he Motor Controller 4 DC KNX* WM AC is a DC motor interface to drive interior roller blinds or venetians blinds equipped with 24V DC motors. Cabling: Quick and fast wiring via Push-in CAGE CLAMP® connectors. 4 motor outputs for a maximum of flexibility. Possibility to daisy chain the “mains”. Commissioning: Via ETS software Compatibility: Compatible with any Somfy KNX controller. ------------------------------------------------------------------------------------------------------------------------ This Motor Controller can manage up to 4 Dc motors individually in combination with the KNX weather station. Supplied in 220-230 V AC 50/60Hz with daisy chain able connector. Embedded 24 V Power supply with a limitation of 0.6A @ 24V for each motor output. Preconfigured functional modes to offer a maximum number of configuration possibilities and thus satisfying all demands. For each zone of motors, it is possible to configure different usage priorities to satisfy the needs of each demand. Example: priority is given to the manual commands or priority is given to the automatic commands. The embedded software of this controller can be updated (for functional developments or corrective purposes) via a dedicated port on the product. Its design facilitates the installation on the ceiling, floor, wall, DIN rail. "Imprints" for cable clamps have been developed to secure the tension relief.