KNX Devices

3E is proud to announce the official release of its external KNX communication modules. 3E, a leading manufacturer of power and energy meters, now offers a complete solution for KNX connection: the module, housed in a single DIN case, can be connected to the meter via optical port. On the PC side, the application software provides graphic information as far as data logging facilities: the 3E specific know-how is devoted to offer easy-to-use, but rigorous, data acquisition, storage and data management. The fully standard KNX module will also be integrated in the incoming series of professional power meters, thus completing the well-known 3E series of instruments, also available with MID certification.

ABB offers a new series of certified KNX devices for flush mounting installation, according to Italian standard. These devices have a soft velvet finishing and come in two colors, black and white, for a full coordination with Mylos wiring accessories aesthetics, characterized by exclusive design, materials and colors. Mylos KNX is a complete range for home and building automation: inputs, switch actuators and dimmers for lighting control, shutter actuators, all equipped with one or two switch rockers, IR Receiver, thermostat and chrono thermostat for room temperature control. Mylos KNX range allows the maximum flexibility of installation, perfectly integrating the ABBi-bus KNX range of devices.

ABB presents a new software concept with the i-bus® Tool. It supports system integrators during commissioning and servicing KNX installations. The Tool accesses an ABB i-bus® KNX device via a standard KNX interface with the assistance of the physical address. The integrator can trigger the desired functions, read values, simulate states and make settings for the connected device. No divergences to the ETS project can result through the Tool. It is optional, so that the devices are still being commissioned using the ETS. The i-bus® Tool is free-of-charge and can be downloaded at http://www.abb.com/knx.

ABB offers a new series of 16/20 AX C-Load switch actuators with and without current detection. The new switch actuators are available with 2, 4, 8 or 12 outputs. In addition to the well-proven function options of all ABB switch actuators, the application program for the new C-load types offer additional copy, exchange and conversion functions. The use of a 6 mm terminal and a universal head screw makes connecting cables with large diameters easy. An auxiliary voltage supply is not required for device function. The device is supplied by the KNX bus voltage. After connection of the loads, the installation can be manually tested directly - without bus voltage.

With the new blind/roller shutter actuators JRA/S from ABB, the requirements for a sustainable and energy efficient automatic sun protection control can be implemented in offices, residential and functional buildings. The new automatic travel detection, copy and exchange of parameter settings, overheat control and enhanced diagnostic messages assist the system integrator with realizing intelligent sun protection and temperature control in future-oriented and energy efficient buildings. The new actuators are also ideal for control of ventilation elements to reach a better room air quality via automatic ventilation.

The new ABB i-bus® KNX Valve Drive Actuators VAA/S are modular installation devices for installation in the distribution board on 35 mm mounting rails. The devices feature six or twelve semiconductor outputs for control of thermo-electric valve drives in heating and cooling systems. The outputs can be operated at 24-230 V AC. The outputs are short-circuit and overload protected. The outputs can be directly controlled using the manual buttons. The Led’s on the front of the device signal the status of the outputs. The connection to KNX is implemented via a bus connection terminal. The devices do not require an additional auxiliary power supply.

Agenor automation is launching its first KNX product – a middleware intended for system integrators that implement standard SCADA packages or their own MS Windows-based visualisation software for KNX building automation systems. Agent is a fully developed KNX communication driver, covering all KNX data formats and communicating with a KNX network through a standard KNX IP router on the back end. On the front end, the client software can use a fast-deployable, standard DDE protocol to symbolically address data and send commands, without the need to study and develop the KNX telegram system.

The surface-mounted RF module AMB8426 KNX provides an ideal radio solution supporting the wireless KNX protocol (KNX RF). The RF module supports both unidirectional and bidirectional devices. The tiny RF module is easy-to-integrate into sensors or actuators and helps OEMs reducing time-to-market significantly. The AMB8426 KNX operates in the 868 MHz frequency band and is license-free usable throughout Europe. The RF module provides received signal strength information (RSSI) and Listen-Before-Talk (LBT) functionality to enhance the quality of wireless data transmission. Due to its integrated power save modes, the RF module is also perfectly suitable for battery powered applications.

The AMB8520 KNX is a compact and lowcost radio data transmission transceiver module enabling wireless data communication based on the KNX protocol (KNX RF) in the 868 MHz frequency band. The integrated microprocessor controls the entire wireless data communication, the host system does not have to perform any radio-specific tasks. The tiny RF module also provides an onboard chip antenna, which eases the integration of the module into a device. The RF module supports both unidirectional and bidirectional devices. Its integrated power save modes make the RF module perfectly suitable for battery powered applications.

The Multi I/O KNX 12 module provides a complete automation solution in one device. It is the ideal basis for vertical integration and upgrades with KNX, for which specific requirements for switching capacity and sensors are provided: with its twelve floating input contacts and twelve switching outputs, as well as extensive configuration possibilities, the software can realize a superior switching performance with this module. Preselection determines whether the channels are configured separately, in groups of six or together. Functions like scene, block and switch are possible over central objects.

The new USB interface combines high-end technology, functionality and flexibility in a perfect way. This innovative device enables data connection between PC and the KNX bus – not only for ETS, for commissioning of the bus devices, but also for visualisation, protocolling and diagnosis. Any software based on FALCON (ETS4, EITT etc.) communicates via flexible common EMI protocol through UIM KNX 42 with the devices connected. The intelligent USB interface supports long telegrams (max 228 bytes) as well as Raw Frames – a special diagnostic mode. Also available as OEM.

The new KNX/DMX Gateway offers two independently controllable DMX outputs with 512 channels each. The device can be used as ceiling or DIN rail mounted device and is available in four different versions: as an extension for the eibPort, with a KNXnet/IP interface, with a KNX twisted pair connector or as a variant with an EnOcean radio interface. For the configuration and creation of scenes, professional DMX software is being used. The software offers a so-called “DMX Preview” which makes all settings immediately visible at the equipment. Transferring the configuration data happens by a network connection or with an SD-Card.

Externally it has barely changed, but internally it has won enormous power. The eibPort version 3 from b.a.b-technologie now has a 600MHz Vortex 86DX processor unit, 256 MB RAM and 4GB Flash memory. EibPort now disposes a data history table of 500.000 telegrams, which allows a detailed data analysis with a new graph library. The new hardware also offers a wide scope for new software, so furthermore interesting software updates will come up. Thanks to the energy optimized vortex processors the power consumption of Version 3 still stays below five Watts. The eibPort is available as KNX, Powernet KNX and as KNX/EnOcean Version. A GSM module is optional.

The new KNX/DMX Gateway from the company b.a.b-technologie gmbh now has new functions. It is now possible to choose how to continue after stopping a light scene. Two Options are available. Pause: The scene is to be continued where it was stopped. Stop: The Scene will begin with the first programmed step. Each of the 2 x 512 DMX- channels is dimmable. Cause of the multiple group address association, each channel can be mapped different. The ETS data import eases the allocation. A search function lists all gateways connected to the network. This enables an easy change of already programmed scenes.

The NEW multi-function Luxomat® KNX Control Touch Screen Panel offers up to 110 KNX-functions. It has a 5.7 inch graphic capable color screen. It can be set up easily and quickly using the ETS software directly, without the need for plug-ins. It has 64 easy to configure screens, with logical linking of up to 60 objects. It is available with four different color frames and four different background-designs which can be set up individually for the compact, multifunctional and as a hypervisual display.

The new two channel and four channel KNX interface sensors from BEG are designed for installation into Ø 60 mm flush mount sockets. They have two or four inputs for floating button or switch contacts to trigger these KNX telegrams. The status indication can be shown by two LED’s. The BEG interface sensor is labeled through a simple handling and an excellent parameter overview, which allows a quick and accurate installation process.

This new eight channel KNX SA-8C-230VEM, is the latest addition to the B.E.G. family of innovative switch actuators. This product has integrated current consumption monitoring in mA/A, as well as the electrical load in kWh. Each channel has 20mA current which can be controlled and linked to the BUS network. Each channel consumption in mA/A or kWh can also logged, which is ideal for knowing when the service intervals are due. These counters can also be reset. The total load is under permanent surveillance, which makes it easy to see failures such as load breakdowns or load transgressions. The unit is easily set up using the standard ETS3/4 software.

This new four channel dimmer actuator, KNX CD-4C, is the latest addition to the B.E.G. family of dimmer actuators. This product enables the switching and dimming of fluorescent lamps with 1-10V EB. This unit allows the total dimming function to be easily set up, the dimming speed, the setting of the minimum and maximum brightness levels, setting up to eight scene selections and the activation and deactivation delay. For example when linked with B.E.G. occupancy sensors, a room’s optimal light levels can be controlled using the daylight linked functions of the sensors. Push buttons can also be linked to allow manual operation of the dimming channels, along with setting a stair light function.

The KNX OPUS Gateway allows the communication between the KNX bus system and the MCU610 controller from OPUS. The Gateway establishes a bidirectional communication, which means you can use the gateway on the one hand for visualization of OPUS MCU610 states like e.g. \"Volume\", \"Input Select\", … in the KNX system. On the other hand it is also possible to execute OPUS instructions from the KNX bus system like e.g. \"Input Select\", \"Volume Up\" instructions with a normal KNX switch. The parameterization of the KNX OPUS Gateway is performed through the integrated USB interface in conjunction with the b+b Terminal software. You can parameterize up to 200 channels per KNX OPUS Gateway.

Balmart launches the KTC-Controller as the first KONEXTEC brand product, an advanced device featuring energy saving, security and comfort functions for domestic environments. The KTC-Controller provides six potential free contacts to open/ close water or gas supplies. In addition, the inputs for water leak and smoke detection and up to six presence detectors 2-EOLR guarantee a full security performance, sending every self-generated alarm to an ARC through a Contact ID. You can connect sensors to measure indoor parameters, giving the chance to cheap KNX sensing. The KTC-Controller also allows bidirectional communication with KNX over SMS, providing remote control and monitoring with just a cell phone.

The B-TRONIC by Becker-Antriebe GmbH will stand for bidirectional KNX RF 1-channel and 15-channel hand-transmitters, bidirectional KNX RF roller-shutter tube-drives and a central control unit for roller-shutters with integrated colour-touchscreen, LAN, WLAN, KNX RF and the approved CENTRONIC- RF-system from Becker. Further KNX RF products are planned.

Made in Austria. BILTON International = permanent R&D at the construction site for LED-lightning and their control units. Think local – act global! Innovation summer 2012: integration of power supplies in the control units of Steel and Curve by BILTON. This symbiosis will simplify the usability and installation. The connection power input will be between 90 and 230 V, so they could also be used outside the EU, and with a total output of 100W there are no limits for the use.

iPads and iPhones are used more and more for visualization of KNX installations. This gateway allows together with the cascadable „bitwise“ BC4X1 controller (5 IR, IP and RS232 interface for AV control) to use one common application for KNX and audio / video systems. Create your personalized user interface with a powerful, full-graphic editor! With one touch the home theater starts, lights are dimmed and shutters are closed. Select songs from your music library (Sonos, Squeeze, WMC…), include the pictures of your IP cams and unlock your house door – at an extremely low price / performance ratio.

Electrical heating systems, especially in French speaking areas, are equipped with a command wire that is called “fil pilote”. The company presents the first two channel KNX interface to control all operating modes of these devices. Now heating systems can be switched to Eco mode, when leaving home or setpoints can be lowered, when rooms are not in use. The KNX application allows an easy configuration together with other temperature controllers, as operating modes are defined according to the KNX specifications. The module is equipped with separate fuses for each of the two channels, so it may be connected directly behind the circuit breaker of the heater. No need for complicated wiring and extra fuses!

Tired of complicated and long configuration? An instant taste of success creating amazing and breathtaking native visualization for iOS smart phones or tablets (Android in preparation) is guaranteed! Configure your GUI only in ETS with zones, circuits, shutters, scenes, HVAC, weather stations, using a simple product database. The configuration is stored through Ethernet in the proServ controller, and when any of your mobile devices connects, it will be configured in mere seconds. The whole visualization just pops up. proServ works 100% biderectionally up to 10 mobiles or tablets! There are no additional costs for software, no need for any editor, only ETS. Check out the free “KNX proServ” apps.

The Quadra by BMS gives an overview of the weather, totally replacing a complete sun protection central unit. Not only the design of the Quadra by BMS is unique: The device measures the wind ultrasonically with no wear and tear. It detects brightness, solar radiation and wind speed from all directions and measures both precipitation and temperature. Simultaneously, the Quadra is a central unit for eight sectors and offers various security and comfort programs. The device is controlled directly via KNX. You can find BMS at the light+building in hall 9.0, booth A35.

The new room temperature controller has been specially developed for public buildings and commercial properties. The temperature controller is equipped with an integrated bus coupler and thus offers all required functions in one single flush-mounted device. Anywhere local operation is not wanted, the room temperature controller measures the room temperature and uses it as the basis for controlling the actuators for heating and cooling. PI, PWM, two-point control and fan coil functions are all available.

Maestro KNX is an application (App) for smart devices running iOS4 or later such as iPhone and iPad. The application combines the Maestro graphic interface with Apple devices, providing full, wireless remote control of KNX and other home systems. The Maestro KNX application controls and monitors KNX and other systems, integrated by the Maestro Server, enabling wireless (WIFi/GPRS) control over temperature, lighting, security, and entertainment systems. The iPhone/iPad LCD touch screen utilizes the same, unmatched, user friendly, Maestro touch screen design, simplifying control of home systems.

The MULTICON TouchHome+ App for iOS and the MULTICON Gateway allow the visualization and control of KNX systems via smartphone and tablet (and for Android in the future). The USP\'s are: 1. control without a server, 2. individually designable graphical interface (no lists), 3. simple setup without programming, 4. connection through TCP/- IP and PoE and 5. a good value for money solution. Furthermore the gateway is the interface to their Multimedia-controller (MMC) to integrate any type of multimedia equipment. The app TouchHome+ also allows the direct control of Sonos and the integration of IP-cameras.

Cytech\'s new Cbus to KNX translator is a gateway between the KNX network and the C-Bus bus system from Schneider Electric, which is another automation system widely used in Australia, Asia and Europe, allowing the two systems to be installed in the same building. KNX switches can control C-Bus dimmers and vice versa. The device is a stand-alone PCB module powered by a wall mount power supply adaptor. The product comes with power supply, KNX Bus connector and C-Bus connector. A free Bus Translator Software allows KNX group addresses to be mapped to any C-Bus Group Address in an appropriate C-Bus Application ID. Up to 3000 group addresses can be mapped on each side.

The first version of the official Comfort iPhone app has been launched and is simple, easy to set up and to use. The free iPhone app can be downloaded from iTunes under “Comfort Control”. Comprehensive guidelines for setting up and using the Comfort app can be accessed at http://comfortforums.com/ forum96/2281.html. For this first version, the app offers functions covering keypad emulation, zone status display, home control menu and alarm events display. Comfort is recommended and fitted by a nationwide network of custom installers in the UK and Ireland.

HomeCockpit Major is a touch panel PC for discerning tastes which combines all of the most important household multimedia functions; video intercoms, camera displays, TV, radio, information services, email. It offers the visualization and control of multiroom audio/video, building automation and all Windows software. The touch panel is equipped with resistive touchscreen, microphone and stereo speakers as standard. A camera with a privacy function and the VideoPerformance module are available as optional extras. In short, with HomeCockpit Major you have everything in one.

Product development, assembly and quality assurance made in Germany – be inspired by innovative technology and an exceptional scope of services: high IT performance, video intercom, camera, HD TV, radio, internet as well as visualization and control of building automation systems, multi-room audio/video and other Windows software. HomeCockpit Excelsior stands for reliability thanks to high-performance IT industrial components (non consumer-goods). Customized frames to your specification can also be developed. In short, the HomeCockpit Excelsior is the first choice for the highend sector.

DIVUS presents the new touch panel KNX TZ with 7“ display and projective-capacitive glass touch. KNX TZ was created for use in home and office buildings and can substitute traditional switches and even internal intercom units within your intelligent system. Because of its small dimensions of 136x213 mm, KNX TZ finds its place in every room. A particularity of KNX TZ is its open operating system Android. It not only allows the use of a countless amount of already existing apps, but also simplifies new developments. Therefore, beneath your KNX system, also many other systems may be “docked” to it. KNX TZ can be mounted in different ways, as well vertically as horizontally.

DIVUS KNXSERVER is the heart of the web-technology based visualisation solution for KNX systems offered by DIVUS. Now DIVUS releases a new DIN rail PC version called KNXSERVER LIGHT on the market. KNXSERVER LIGHT fits best in small apartments or projects with less group addresses / functions. Through network access it will give you full control of your system, regardless of whether you are at home or on the way. Various KNX functions like illumination, shadowing, temperature control or similar can be displayed and controlled through the web based visualisation. Because of its compact design, KNXSERVER LIGHT can be mounted directly in the electric cabinet with the other KNX components.

ayControl is the professional KNX control for iPhone and iPad that already won a user experience award. The new version, supporting the latest iPhones and iPads, once more sets standards in usability, design, and efficient set-up time for KNX visualizations. Functions: KNX, IP cam and multimedia integration via IR or Squeezebox™, RGB color control and more. ayControl KNX is fast and intuitive. Neither servers nor dedicated hardware are required. Use this native iPhone / iPad app together with any standard KNX/ IP router or KNX/IP interface. Free PC configuration software (with ETS import) is also available. Be more productive with ayControl KNX.

ayMonitor KNX is a free, simple and powerful mobile KNX diagnostic tool for iPhone, iPad and iPod touch. ayMonitor KNX now supports group address import from CSV files and it utilizes the full display resolution of current iPads. Analyze errors easily and solve problems quickly while moving around inside a KNX building (connected via Wi-Fi) or from remote. This free app can save you hours! Just download ayMonitor KNX for free from the Apple App Store onto your iPhone, iPod touch or iPad and immediately connect to your KNX system via a standard KNX/IP router or KNX/ IP interface.

With ayControl you can control buildings easily with iOS and Android smartphones or tablets via WI-FI or 3G connections. Unlike other KNX visualizations, ayControl for Android and iOS is easy to use and does not need an additional server. With its efficient configuration (with ETS import) ayControl is not only an ideal choice for new projects but also for upgrading existing ones. Offer your clients an upvaluation of their KNX systems to control lights, blinds, IP cameras and more. Get the free base version from Android Market or iTunes App Store. Are you interested in all innovations or do you want to talk with the ayControl Team? Meet their team at Light+Building.

In addition to the professional KNX functions ayControl KNX now offers a seamless connection to door stations. Video and voice connections based on VOIP/SIP protocol are now integrated. By ringing the doorbell a video connection pops up on your iPhone/ iPad/Android device and allows you to talk with the visitor and to open the door. In automatic mode, which is configurable for certain time intervals (e.g. office hours of a medical practice), the door opens without user interaction and the user gets notified by a sound/vibration. Are you interested in a live demo or do you want to talk in person with our ayControl team? Visit them at Light+Building.

Eelectron enters the residential world with the eelecta® range, fully based on KNX. The range is composed of KNX HomePads and a touch panel. Available in seven colors (ceramic white, chromo, black matte & weave, ivory, gold and bronze or artwork’s range), Eelecta’s HomePads feature a central cross (red, white or black), which customizes the product with different finishes and multiform pad covers. The front has five LED status indicators freely configurable by ETS, one for each button channel plus the corner LED useful for night localization. The HomePad is available in models with four or eight channels, with or without temperature sensor to realize a room thermostat, with or without four rear free inputs to interface a slave version of the product (PB40AxxCON) or other conventional switches.

Eelectron offers active energy-meters for single-phase alternating current with either 1, 7 digits digital counters. They have 2 S0 output generating pulses for remote processing of energy active and reactive measurements for 2 tariff. KNX Interface included with the device. Features: • Green backlighted LCD • For direct connection 80 A • Seven digits for energy values indication • Accuracy class 1 for active energy • Accuracy class 2 for reactive energy • Operating range current for direct connection 80 A = 0.02 ... 80 A • Standard versions designed to be combined with the communication module • Energy register zero setting • Energy register for import and export • Instantaneous power (re)eactive display • …

Eelectron enters the residential world with the eelecta ® range, fully based on KNX. The range is composed of KNX HomePads and a Touch panel. Available in seven colors, Eelecta’s HomePads feature a central cross (Red,White or Black) , which customizes the product with different finishes, and multiform Pad Covers. The front has five LED status indicators freely configurable by ETS, one for each button channel plus the corner led useful for night localization. The HomePad is available in models with four or eight channels, with or without temperature sensor to realize a room thermostat, with or without four rear free inputs to interface a slave version of the product (PB40AxxCON) or other conventional switches.

AD84A01KNX module includes four digital inputs to interface free potential contacts; four analog / digital inputs for free potential contacts or temperature sensors and four led outputs. Digital inputs can interface sensors, traditional buttons, etc; four led output channels at low voltage can drive LED for synoptic panels or switches. Inputs five to 8, set as analog inputs, can enable up to two temperature probes (with On/Off threshold) and two thermostats to control heating and cooling equipment, valves, two and four pipes fan coils; etc.. The device is equipped with appropriate communication interface with the TP1 bus type.

From October 2011 EIBMARKT presents a new switch actuator 12fold (N000202), where six channels provide the usual capacity of 16A in manual operation of the current 8-fold actuator and where there are an additional six channels for 8A without manual operation. This permits the installation of the MDRC casing in only six width units. That means in a standard current distribution board, 24 channels can be integrated on one DIN rail. Besides its known high stability and high quality casing and a sophisticated electronic system, the actuator offers comprehensive parameters for a diversity of applications.

From October 2011 EIBMARKT presents a new shutter/blind actuator 6-fold (N000303) with manual operation. In addition to the high stability and high quality casing and the sophisticated electronic system known from the 4/8-fold blind actuator with additional cut-off relay for parallel operation, this actuator disposes of comprehensive parameters for a diversity of applications and, of course, the 1-byte object for runtime and slat.

Since October 2011 EIBMARKT presents a new switch actuator where six channels provide the usual capacity of 16A in manual operation of the current 8-fold actuator and with six additional channels for 8A without manual operation. This permits the installation of the MDRC casing in only six width units. That means in a standard current distribution board 24 channels can be integrated on one DIN-rail. As an additional option the actuator provides binary inputs for operating, status or malfunction messages. Besides its known high stability and high quality casing and a sophisticated electronic system the actuator offers comprehensive parameters for a diversity of applications.

Since October 2011 EIBMARKT presents a new 6-fold shutter/blind actuator (N000303) with manual operation. In addition to the high stability, high quality casing and the sophisticated electronic system known from the 4/8-fold blind actuator with additional cut-off for parallel operation, this actuator disposes of comprehensive parameters for a diversity of applications and, of course, the1-byte object for runtime and slat. From mid 2012 there will be another version by means of capacitive sensor keys for manual operation.

The KNX Server 224R is ideally suitable as PC for KNX visualisation and control of light, heating, shading, multimedia, etc. within a KNX system. The KNX REG-PC has got a high-capacity 1.0 GHz Dual Core. Two integrated KNX interfaces for parallel use allow KNX remote maintenance by ETS even with application software running. Via the 1Gigabit Ethernet port the KNX Server is integrated into existing TCP/IP networks. The Micro-SD slot at the front side can be used for storing and exchanging of e.g. measuring data. A DVI monitor port and four USB ports are ideal interfaces for service and commissioning.

The new KNX Transceiver IC E981.03 has been successfully assessed by the KNX Association. A UART (maximum data rate 115 kbit/s) and an SPI compatible interface are available for connecting to the host controller. Two voltage regulators provide the power supply for the application and several energy-saving modes are supported. A configurable maximum bus load (determined by a bus current and a maximum slew rate) guarantees KNX compliant behavior even in cases of errors in the system. The component comes in a QFN32L7 package with 0.65 mm pitch.

The „Style“model of KNX Touch One shows exquisite design and extended functionality. A magnetic system keeps the glass pane of the touch display invisibly at the wall. The display shows graphically animated weather data and individual pages with bus data, such as oil fill level or energy consumption. For an easy readability, values can be converted (Kilowatt instead of Watt). The changing of display pages can be controlled via the bus, e. g. by urgent messages. The internal automatic system for shading and ambient climate is set at the display or in the ETS. Switching events can be linked with the integrated logic module.

The KNX A2-B2 door control module integrates door drives into the KNX bus system. The module has two outputs, either for two doors with single-surface noperation or for one door with doublesurface operation. The operating mode is defined in the ETS software (impulse, dead-man-control or defined open/ close). The doors and also other bus participants can be controlled via the integrated binary inputs. The inputs are suitable for switches, closed contacts, dimmers, for control of shading systems and windows, for scene control and for transmission of temperature, brightness or eight bit values. The response time for standard, convenience or dead-man mode of manual push buttons can be set individually.

The indoor sensor KNX AQS/TH-B-UP handles ventilation and separate room temperature control at the same time. The unit records the CO2 content, temperature and absolute/relative humidity. In addition, it calculates the dew point and monitors the comfort range (DIN 1946). Depending on the CO2 concentration and humidity measurements, the integrated ventilation controller issues a command to the bus to provide fresh/exhaust air. A temperature controller is designed for heating and cooling. Different target values may be set in the ETS for the day, night and „frost/heat protection“. Furthermore, the temperature required for the room can be set directly on the unit using two buttons.

Empure is pleased to present their free & bidirectional “RTI to KNX driver”. This easy to set-up driver works with their low cost KNiX Port (“IP to KNX gateway”) which will also work with the FREE iPhone and native iPad app. The driver is made for the RTI “integration designer”. It supports everything from lighting, blind and HVAC control up to any trigger events (macros). So you can easily use the press of a KNX switch to execute a RTI macro to turn off the TVs, the stereo or anything you desire! The gateway is an object server which doesn’t clutter the KNX bus with unnecessary traffic because it stores all the needed information within its own buffer.

\\\"SynOhr multi-sense\\\" is the world\\\'s first room controller with built in voice recognition. The room controller measures the temperature, humidity and color intensity. A dot-matrix can show KNX compliant 14- byte strings. An integrated speaker outputs audio signals stored on the included SD card. The vocabulary speech recognition is approximately 150 words, need not to be taught separately and can be parameterized via ETS, so that commands as \\\"COMPUTER, LIGHT 30 PERCENT\\\" are possible. SynOhr® multi-sense is fed directly from KNX bus.

The KNXnet/IP Router (3U) supports up to five KNXnet/IP tunnels and can be used as line or area coupler. Its integrated display shows the most important configuration parameters at any time. This allows putting the device into operation very fast and trouble free. The IP address of the fast ethernet connection can be set manually by ETS or automatically by DHCP or Zeroconf. Furthermore the KNXnet/IP Router has a battery buffered real time clock and offers a SNTP server. The KNXnet/IP Router is fed by Power over Ethernet or an external 20-30V AC/DC power supply.

The new ESYLUX PD-C180i KNX with integrated bus coupler (TK) is optimally suited for presence dependent light control in floors, stairwells, restrooms and where a safety detection from the wall should be realised. 180° detection range as Master or Slave. The coverage of the two PIR\'s can be programmed separately. Several in/outputs, external light sensor, sensor key, HVAC, twilight switch and acoustic sensor are showing the universal applicability. Parameter setting happens via ETS. Compatible to DIN 49075, optimal integration in brand switches, cover frame (in five colours) as well as surface-mounted box IP 20 and IP 44 are available in stock.

The approved ESYLUX outdoor motion detector RC 230i is now also available with an integrated bus coupler (TK) as KNX version. The 230° detection range and 360° anti-creep protection are offering a safety detection with coverage of up to 20m by 2,5m installation height for all outdoor-applications. The RC 230i KNX is usable as Master, functions switching or dimming or as Slave. The sensitiveness of the PIR\\\'s is separately adjustable. Several in/ outputs, e.g. external light sensor, sensor key, locking functions, parallel connection, twilight switch are providing an universal usage of the lighting control. Parameter setting happens via ETS.

The DomiOP eBIS504 combines state-ofthe-art features and top performance with an outstanding design. It is the ideal choice for all HMI applications in building automation, when there is the need for remote monitoring, scene programming for more comfortable living and scheduler/timed actions. The eBIS504 features a 4.3” widescreen TFT display with 480x272 pixel resolution, LED backlight and support for 64K colors. The two built-in dual 100Mb Ethernet interfaces with switch function enhance its communication. JMobile, the software platform for real-time monitoring and seamless remote access, makes the eBIS504 an innovative and efficient solution for the new requirements in building automation.

The DomiOP eBIS504 is a certified KNX control that combines state-of-the-art features and performance with an outstanding design. Easy to use, it is the ideal choice for home control functions, as for instance remote control and scene programming for more comfortable living and scheduler and timed actions. The eBIS504 features a 4.3\" widescreen TFT display able to provide high resolution with 64K colors. The built-in dual 100Mb ethernet interface with ethernet switch enhances its communication capability.JMobile, Exor’s mobile HMI platform for real-time monitoring and controlling of remote equipment, completes the innovative eBIS504.

Where KNX cabling is run internally and may be visible, FS Cables offer a certified KNX cable with a white jacket instead of the standard green. The cable is the same in construction as the standard green 2 x 2 x 0.8 mm but has a white LSHF sheath with yellow printing. As with the standard green cable, the FS Cables white KNX cable has been certified for use on a KNX system. The LSHF sheath material makes it ideal for installations where the evacuation could be slowed in the eventof fire, as it emits minimal amounts of toxic fumes when burnt.

Since May 2011, the display and alarm panel KNX-TAB is 12 / 2 LED has been available. The hardware has been redesigned and now comes with improved electrical and mechanical properties. The LED-caps are closed on the front panel and implement with an additional seal. New is the switchable integrated buzzer. The two-color LED (red / green) lights up brighter during lower power consumption (approx. 27 mA at 29 V). Connection to the unthrottled output of a KNX power supply is possible. As the auxiliary voltage can be nine to 36 V, DC is used, which allows operation in combination with KNX alarm systems. The operation is also possible without auxiliary voltage.

The hardware of the key switch has been completely renewed and now offers improved electrical and mechanical properties. The LED on the front cover is closed and provided with a seal. The key switch is available in a variety of mechanical designs, including a special version IP67. The two-color LED (red / green) lights up brighter than the old version. Using the ETS program red, green, off, flashing, time limit and permanent ON are parameterized. The buzzer is controlled with a separate object. The volume cannot be changed by jumpers anymore (as previously).

With a new bus coupler and ETS product database without any plug-in, key switching, dimming, blinds, value, Lightscene is now configurable as inputs or two-button operations. Highlights are the dead man switch, a second sending group address for long / short pushing and the barrier function of each button. The two-color LED (RED / GREEN / OFF, Blink) have separate objects and can query its state. The priority object is used as the \"third state\" on a separate group address. New is the integrated buzzer. The device is connected directly to KNX and requires no auxiliary power.

Chorus ICE Touch KNX push buttons offer the latest in technological and design solutions where the purity of glass combines with gentle-touch controls and stylish luminous symbols. These new GEWISS push buttons are available in three colours (black, white, titanium) and with two, four or six independent channels for lights, dimmers, shutters and scenes control via KNX. The colour (blue, amber) of status and localisation LEDs, the touch effect, the acoustic signaling and the touch sensitivity level can also be configured. The push buttons can be installed in Italian standard three module flush mounting boxes and are available in System-Mode and Easy-Mode versions.

The DIGICONTROL integration module, ems4.KNX1E, from the house of GFR serves as a bi-directional gateway and a connecting link between the Instabus KNX and DIGICONTROL automation systems. Over and above this, the ems4.KNX1E, in conjunction with other DIGICONTROL integration modules, facilitates the connection of KNX with all other systems of the building automation network, for example, to systems that are based on BACnet, DALI, M-bus, EnOcean, Modbus, CAN bus, Profibus, etc. If KNX is deployed, ems4.KNX1E forms the basis for the implementation of cross-service functions, which, in turn, enable energyoptimized and comfortable operation of modern building systems.

The CO2 sensor measures the carbon dioxide concentration in the air. The values of the various sensors can be connected via logic gates. Values can be processed further as desired, for example, via the Gira HomeServer three or Gira FacilityServer. Through the temperature controller with a specified setpoint, the Gira KNX CO2 sensor can also be used for the temperature control of rooms. The Gira KNX CO2 sensor determines at which temperature the water contained in the air begins to condense on ceilings or walls. If the dewpoint is approached, the Gira KNX CO2 sensor can control heating or ventilation and send out a message via the KNX system.

The Gira Control 9 KNX enables convenient control of the entire building technology even without the Gira HomeServer as a higher-level central control unit. Therefore, the device is ideal for modern singlefamily houses or smaller building complexes. Thanks to its drag-and-drop design, it can be configured easily and quickly by an electrical engineer. The Gira Interface design wins over users with its high level of user friendliness and fast orientation. As a complete KNX system device, it can be combined with all Gira KNX components, for example with the Gira DCS-IP-gateway. With its various design cover plates, the Gira Control 9 KNX matches any room concept.

The series of HDL control panel include two types: two buttons and four buttons; each button can be locked-in, unlocked and bus triggered. The button assembles the control function of switch, dimming, shutter, flexible, scene, percentage, combination,and string. Scene dimming and combination controller is relative new. In addition, the brightness of the backlight is adjustable (0 % ...100 %), and it can be changed through the KNX bus. In the night mode, the brightness can be adjusted to the minimum level automatically, for energy savings and environmental protection. This series control panel supports the function of infrared acceptance, and the panel can also be remote controlled.

The HDL KNX sensor -M/HS05.1 includes four independent logic blocks and one combined logic block. Each logic block is combined with the condition of motion sense, brightness, temperature, external condition and two dry contacts. In real applications, choose requested functions to combine the logic for AND or OR. According to the controlled targets, switch, absolute dimming, shutter, alarm, percentage, sequence, scene, string(14 bytes) can be used as the control function. Open-delay and close-delay are both available for each of the functions. Meanwhile, the sensor can be configured as the master and slave mode; it can report the current status of every condition.

The HDL KNX M/S04. One product (DRY Contact 4CH Sensor input and output module) can be used as multifunction input and output. Any signal from temperature sensors or switches can be used as an input. The output can be used for 0-10V DC dimming and LED Driving. Sensors, logics and dimming functions are possible. The sensors can control many types of objects, such as switching, dimming, shutters, forced, scenes,… The logic functions contain five logics of four channels. The KNX DRY Contact 4CH Sensor input and output module can be used in a variety of buildings and any other area where temperature control and 0-10V dimming is needed.

The HDL KNX HVAC controller can be used as a high power on/off control device for high- medium-low fan speed control and also has cooling and heating functions. Its seven channels can be configured independently for floor heating control with digital accurate temperature sampling. Also, the HVAC controller can be configured as five channel relay output and two channels 0-10V DC. In this case, the staircase light function or some other functions can be configured for each channel. The KNX HVAC Controller can be used in a variety of buildings such as an airport, metro station, sports center, car parks, office building, and any other area.

GVS Push Switch sensor series includes: 1fold, 2fold, 3fold, the material and color of panel and frame can be customized. The main functions are: 1. programmable RGB LED; 2. switching sequence; 3. scene with storage function; 4. switching,dimming; 5. short-long operation; 6. multiple operation; 7. blinds and shutters, value sender; 8. RTC operation.

GVS Shutter actuator for 230V AC drives. The following functions can be set in the application program: 1. movement UP/DOWN 2. stop / louvre adjustment 3.move into preset position (up to two preset positions) 4. set preset position (modification of the preset position during operation) 5. move to position 0…100%; 6. adjustment louvre to position 0…100% (only blind working mode) 7. scenes 8. automatic sun protection 9. monitoring of wind, rain and frost protection (cyclical) 10. block 11. forced operation 12. status display of the current position, status display of the current operating mode 13. LED display 14. two operation modes, Venetian blind and shutter.

tebis KNX domovea is the new solution presented by Hager for intelligent, networked building visualization. It is an easy-to-use client software with server hardware (six mod) for installation on the distribution board. This modular equipment is fitted with RJ45 ethernet 10/100 sockets for connection to the internet or home network, as well as with a KNX terminal block and three USB connections. Through its extensive factory configuration, domovea easily connects the KNX bus system with the IP world. A tebis touch panel PC can act as the display and control unit or, if preferred, a commercial PC, notebook or even an iPhone app can be used.

The apps for iPhone and iPad enable mobile access to all of Hager’s displays and functions of the tebis KNX domovea. Other functions include the creation of individual selected favorite devices or the use of a search function for devices, device groups or categories. Inside the house the apps communicate wirelessly via www.domovea.com. Both apps can be found and downloaded on iTunes with the keyword domovea. Configuration of the apps is not necessary - it is generated automatically.

The Hager energy manager is a solution to improve the energy efficiency in residential buildings. In addition to basic energy management functions, the energy manager offers electrical energy optimisation and visualisation. Thanks to the three channels meter, the user can monitor his electrical production or consumption on the local display and on domovea, the hager visualisation. Moreover, the hager energy manager transmits for information the current tariff to the local display and domovea. The tariff is also used for the energy consumption visualisation, shown for each individual tariff period. Hager offers a complete solution for electrical energy management, by means of which up to 10% energy savings can be achieved.

The ECS132 KNX new single phase Energy Meters line in one module DIN Rail for direct connection 32 and 40A and in three modules DIN Rail direct connection 125A are now available. It is possible to attach the Herholdt Controls KNX communication module to these meters. The meters are MID certified and have the registers of import/export energy. The KNX communication guarantees the availability of 11 important parameters that can be used by upstanding energy management devices.

The new Herholdt Controls KNX communication module, which is joinable by the lateral IR port to all the Herholdt Controls measurement devices such as single and three phase energy meters, power meters, network analyzers,… is now transmitting a wider range of electric quantities: • active Energy T1+T2 • reactive Energy T1+T2 • active power • reactive power • apparent power • voltage L/N – L/L • current • power factor • frequency

Home Systems Consulting, an engineering company fully dedicated to the design and development of technology integration solutions created HSYCO, a Web Based tool for the development of integrated control systems for KNX, MyHome, Duemmegi, Modbus, TCP/IP, Dali, Tridonic, DMX, Airzone, Daikin, Mitsubishi, Fcc Planterm, Elsner Elektronik, HWGroup, Axis, Panasonic, Mobotix, Sony, Samsung, Vivotech, Bentel, Paradox, Tecnoalarm, Squeezebox, NetStreams, NuVo, Denon, Epson, Rotel, Yamaha, JVC, irTrans, Electrex, Legrand, Schneider, Power One, Ekahau, HID, 2N, Snom. HSYCO provides local and remote control with a customizable Web interface, accessible through the most common wireless devices.

B-CON is the multi-supplier control technology software for larger facilities and sites. It combines all subsections in one system. Target applications in technical facility management are open systems like BACnet, KNX, LON, M-BUS, in combination with proprietary systems of HVAC, malfunction, energy monitoring and security systems. The B-CON Software generates an easy PC-based management system on all levels in facility technology.

iKNiX is pleased to present their FREE & bidirectional “RTI to KNX driver”. This easy to set-up driver works with their low cost KNiX Port (“IP to KNX gateway”) which will also work with their FREE iPhone and native iPad app. The driver is made for the RTI “integration designer”. It supports everything from lighting, blind and HVAC control up to any trigger events (macros). So you can easily use the press of a KNX switch to execute a RTI macro to turn off TVs, the stereo or anything you desire! The all new V3 offers 1.000 data points (group addresses) which is great for bigger projects (V2. 250 DPs). Now available on the ANDROID market!

iKNiX proudly presents the first affordable and easy to manage KNX control solution for iPhone, iPod touch and -NEW- iPad. Simply control your lights, blinds, heating and check your weather and status info with your fingertips – bidirectionally! No more fiddling on the iPhone needed, simply use the online portal www.iknix.com OR USE THE NEW ETS application! The FREE App works only in combination with their KNiX Port gateway. The all new V3 offers 1.000 data points (group addresses) which is great for bigger projects (V2. 250 DPs). Now available on the ANDROID market.

Ingenium offers a gateway that permits its BUSing protocol to interact with KNX. The gateway can be operated in three possible ways: integrating a KNX device or installation in a BUSing one by using the BUSing Development System, integrating a BUSing device or installation in a KNX one by using the KNX ETS software; or the possibility to control both systems in a bidirectional way. The new gateway increases the number of possible combinations of KNX and BUSing material. The Gateway is expected to be available in the first semester of this year.

Ingenium has introduced its new device SR KNX to the market, the new version of their patented SR device, 360° radiofrequency movement detector, which can be installed in false ceilings or walls, thus protecting the device from undesired manipulations or vandalism. SR KNX goes beyond optical detectors, in terms of sensitivity and precision. Detection configuration parameters are: smoothing, saturation control cycles and detection area adjustment. SR KNX detects movement through non-metallic objects. It has a sensitivity adjustment and programmable timings in ETS. It detects movement in a maximum area of 12x6 meters, to 2,5 meters high.

Intesis introduces its 3rd generation of KNX gateways for air conditioners, with a common object interface allowing a very easy integration, and including new and advanced functions: different standard KNX datapoints, smart use of Open Window, Occupancy, and Sleep, Power and Economy modes, providing a step ahead in comfort and energy-savings applications. Four binary inputs have also been included, for freepotential contacts, allowing integrating many different devices. This new generation of gateways is available for Mitsubishi Electric, Daikin, Panasonic, Mitsubishi Heavy Industries, and for other AC brands coming soon.

Houseinhand is the brand new iOS app for KNX by Intesis, very easy to setup, powerful, and with the most simple, flexible and user-friendly interface. Not server-based, which means immediate reaction to your commands. No specific KNX/IP gateway required, visualize and control any new or existing KNX installation. Simplicity of use and quick configuration are the most valuable points of houseinhand. All necessary configurations can be performed with the free software Houseinhand Designer, available for download at www.houseinhand.com. The Houseinhand App is available for download, free of charge, in the Apple App Store, supported devices are iPod touch, iPhone and iPad.

Intesis Software S.L. introduces the new version of the IntesisBox® DK-RC-KNX-1 gateway that includes, as the main new feature, the possibility to be used as master remote controller. Now it’s possible to connect directly to the Daikin SKY and VRV compatible indoor units, with or without using their remote controllers. Also this version is provided with new extended functionality, going from 50 to 83 communication objects, and stressing the separation of the control and status objects, and the use of KNX standard data points.

Intesis Software S.L. introduces the new IntesisBox® PA-AC-KNX-1i gateway for the Panasonic AC Etherea Line. This gateway features four binary inputs as a new and important hardware improvement. These binary inputs have the possibility to be parameterized and configured in several ways through ETS. The Intesis-PA-AC-KNX-1i has full control of the Panasonic AC Etherea indoor units, and is provided with new extended functionality, stressing the separation of the control and status objects, the use of KNX standard datapoints, and the possibility to perform several actions depending on the occupancy of a defined area, or the status of a window contact.

Whenever there are a large number of people in a closed room, the CO2 content in the air can reach critical levels and affect both their ability to concentrate and their performance. The new JUNG CO2 sensor measures the carbon dioxide content, the relative humidity and the temperature inside. If the set limit values are exceeded, it can automatically trigger window openers or the ventilation system and ensures that the air in the room has the optimum quality for concentrated work and well-being.

Ideal for use in supermarkets, shops and offices: the KNX control panel in an aluminum housing with a high-quality glass front regulates switching, dimming, blind control and scene functions via 24 independent capacitive sensor buttons. Color LEDs on the control sections signalthe different system states of the KNX installation dependent on the limit values. Removable labeling strips can be used for an optimal assignment of the functions.

JUNG will be the first manufacturer presenting a KNX rotary sensor for control of dimming, switching and shutter actuators as well as for set point adjustment of a temperature controller. The sensor follows the well-known concept of a rotary dimmer control with incremental encoder. The rotary sensor has three satellite inputs to connect conventional potential free contacts of switches, push-buttons and magnetic contacts. An acoustic signal transmitter acts as an acknowledge tone or alarm signaling. The KNX rotary sensor is available in numerous materials and colours in JUNG design.

The new Smart-Control is part of the JUNG Smart Display family. It offers a convenient control of KNX functions via a touch screen and sensory control buttons. The colour-touchscreen offers an intuitive user interface. The structure of the pages is logically oriented either to favorites, functions or rooms. The selection is carried out by scrolling and browsing. To extend the functionality a combination with a speakermodule or a push-button extension module is possible. In conjunction with the frames of the LS-design and the FD-design the Smart-Control appears in an elegant way.

LOYTEC‘s new interface module LKNX-300 provides in combination with various other LOYTEC products seamless connectivity of standardized bus systems via KNX TP1 and KNXnet/IP to the KNX world. Connectivity to several systems is supported. For mere gateway functionality, LKNX-300 is connected to the universal gateway LGATE-950, which supports connectivity to even multiple bus systems simultaneously. Using the LKNX-300 together with the freely programmable L-INX automation servers, KNX connectivity becomes available at automation level for HVAC applications. LKNX-300 can also be combined with the new L-ROC room automation system by LOYTEC.

The new LGATE-950 allows an easy data exchange between KNX/IP networks and other systems! KNX TP1 devices, M-Bus devices or even ZigBee PRO wireless nodes are integrated by the use of optional expansion modules. All data points are automatically mapped to OPC data points and are available through the integrated OPC XML-DA server. LGATE-950 offers AST functions for local time scheduling, alarm management, collection and e-mail notification. An integrated web server provides access to all device parameters and appliance-based data points. Information is also available via the integrated LCD display. LGATE-950 is fully integrated in the L-WEB System.

LOYTEC offers freely programmable automation stations with I/O expandability. The high-performance L-INX Automation Servers provide gateway functions for the simultaneous integration of KNX/IP and Modbus as well as CEA-709 and/or BACnet. Either KNX TP1, M-Bus or ZigBee PRO can be integrated optionally. The combination of free programmability (IEC 61131-3), an integrated OPC server, an integrated SCADA system (HMI), gateway functions, scheduling, alarm monitoring, trend logging and e-mail notification opens multiple uses for building automation.

Lutron’s powerful, flexible and expandable GRAFIK Eye® QS Wireless system has the ability to connect directly to the KNX bus; offering installers the opportunity to link their technology to an even wider range of applications. The system not only allows users to adjust the lights, the GRAFIK Eye® QS Wireless can also be integrated into a wide range of Lutron wireless sensors, blinds and controls to expand the system’s capabilities. With the ability to assign controls directly from the ETS Software and adapt the system to suit user requirements from the front panel, with no need for re-commissioning, the system offers installers the best in flexible control for both daylight and electric light.

The new MDT actuator can switch eight loads. All outputs have status lights and can be switched manually by push buttons. For easy programming ETS3/4 is used. The actors come with wide applications. The actual load power and the sum of all channels can be sent as ampere or kWh to the bus, and a threshold limit or load error and an overload can be used. All channels have an operating hour meter implemented, which can be used for an end of life or service warning. The MDT actors are used for 16A with high C-load 100uF (AMS) or 200uF (AMI). Both actors are also available as 4-channel version.

MDT now offers a 2TE Line coupler to connect two KNX lines to each other with galvanic isolation. The unit can be used as a line coupler, area coupler or repeater. By using it as line or area coupler, you can choose which telegrams are transferred or blocked. This function reduces the busload. The unit will be available in Q4/2011.

The new generation of MDT switch actuators saves space in the power distribution board with 20 outputs at only 12 units. The floating outputs with bistable relay switch up to 140μF and C-Load with16A. All outputs have LEDs and can be operated via switches. The extensive application provides logical functions, status feedback, lock and time functions such as on / off delays and retriggerable staircase function. The positions of the relays can be programmed individually for bus voltage failure and recovery. The new series is available with 12 channel in eight units and eight channel in six units.

The MDT Gateway in six units allows control of 16 Dali groups. Also the individual control of up to 64 ECGs is possible. For example, two dali groups each with 16 lights and 32 additional lights can be individually switched or dimmed. It detects lamp and ECG error, and sends alarms depending on the settings. The commissioning and assignment of the groups can also be done without KNX bus. Alternatively via control buttons and LCD display, built-in Webserver using WLAN or the MDT software tool. Additionally the gateway has two inputs for connecting push buttons or presence detectors.

TSLC-A can be used as a line/backbone coupler or as a repeater. Used as a line coupler, it links a line to a main line. Used as a backbone coupler, it links a main line to the backbone line. At the same time telegrams can be filtered. In this way only telegrams are passed on, which are intended for the other respective line. The device uses a high-performance embedded processor, data ports on both sides share a buffer, able to buffer up to 400 KNX standard data frame telegrams to minimize data loss. TSLC-A provides a data connection between two separate KNX bus lines and also isolates the bus lines from each other in order to limit bus line interference.

The TSView monitoring system software is a set of intelligent control system visualization monitoring software based on KNX and EnOcean wireless sensor technology. It collects and processes the real-time status and data of areas, lines and equipment at all connected levels of the KNX network, to achieve centralized visual management of the KNX system. TSView runs on a PC with Windows platform and mainly achieves automatic monitoring of systems such as lighting, shutter control, HVAC, security, video intercom, background music and other subsystems of airports, exhibition venues, shopping malls, schools, sports venues, hospitals, railway stations, hotels, clubs, home etc.

The new E4000 air quality probe provides the best tradeoff between health, comfort and energy saving. This probe measures CO2, VOC (Volatile Organic Compound like Formaldehyde..), absolute/relative humidity and controls ventilation accordingly. This probe also controls temperature or felt t° (Vs humidity) with an auto adaptive PID. Heater and or cooler can be controlled. This is useful when the building manager wants to lock the t° set point as set by ETS. The probe determines at which temperature the contained water in air will condensate to moderate cooling. Moreover, an optional EnOcean RF module can be plugged in to perform a gateway with all wireless EnOcean devices in the room.

InVendi Panel ITE-Verify is a visualization and control system of temperature and humidity values from the Nechi Group. Benefits: • High flexibility and scalability. • Solution based on KNX standard protocol. • All components are distributed completely programmed. • Fully customizable display format. • Compatible with InVendi BMS without additional equipment. InVendi Panel ITE-Verify is the ideal solution to incorporate the company‘s corporate image in the control panel.

InVendi BMS 3.0 is a new version of the visualization and control software of the Nechi Group. This version offers innovations such as access from mobile devices like iPhone, iPad, Android, PDA and the integration of OPC communication to facilitate the integration of KNX and thirdpart devices. InVendi BMS is capable of communicating with all devices in the area of building automation, allowing local and remote control. InVendi BMS is available in several packages: Web, Panel, Mobile, Retail, Panel ITE-Verify.

This powerful development can recognize devices in real time to obtain additional information that helps by the selection and implementation of KNX devices at your facility. Nechi Group are pioneers in the introduction of techniques of Augmented Reality in the construction and building automation. ARIzone works on Tablet PC or smart phone and enables the user to recognize the installed device and to display it in three dimensions, to check the electrical diagram, to find technical specifications and to request further information from the manufacturer.

With this new and innovative software solution of NETxAutomation, you are now able to control your KNX project on the modern and popular operating system Android™. This new system supports all KNX NETIP protocols. The software does not need any additional server. It controls your KNX installation completely independently. The system offers you highest freedom of design, and of course the essential editor is available for free. Design your project according to your preferences completely comfortably byusing the drag & drop feature, included graphical libraries and the convenient button editor on a PC. After that, you can export your project by a few clicks on the Android™ device.

Modern building management system for ideal central control and visualization for the largest projects. • Extended OPC Server • Easy connection of external systems • Module for energy consumption • Including Smart Clients for iPad and Web • One editor for all visualization clients • Free creation of design of visualization • Comfortable designing with drag and drop • Large libraries • Built in Button Designer • Data archiving for measuring and consumption in SQL database

The new software system from NETxAutomation grants a comfortable energy management for different building dimensions. • Management of any resource • Rates can be defined freely • Flexible cost calculations • Free-to-define project structure • Easy creation of cost groups • Use of any types of meters • Interface for SQL database • Separate report generator • Template editor for reports • User friendly editor • Data export to Excel, xml, pdf,… • Period comparison easily to define • Data recording for several years

Normalux, a Spanish company with more than 25 years of experience in the design, manufacturing and sales of emergency lighting, launches into the market KNX compatible emergency lighting of its family EXTRAPLANA. A discrete and versatile device with reduced dimensions. It can be embedded both in the ceiling or in the wall and can also be made waterproof (IP-65) by using different accessories. There are models with one, two or three hours of operation and with LED technology for energy efficiency. The device uses the “Protector” battery system.

DOPPLO model is equipment with a very innovative design, useful in those buildings where the most demanding conditions should be met. It is a waterproof device (IP65) with an easy plug-in installation system, for fast mounting. Models are available with 900, 1600 and 2500 lumen output. Operation from one to three hours. DOPPLO includes the “Protector” charging battery system. Via the “Protector” charging system, DOPPLO’s battery can be fully charged in 10 hours (instead of the 24 hours needed by normal devices), and the battery will only charge for the percentage lost. In this way the life of the battery is extended and the consumption of the device is reduced.

iSimplex Home Server LX simplifies residential automation, allowing the realization of a comforable home, increasing the quality of life of the inhabitant. The home becomes one’s ideal partner. Home automation, access control, alarm systems, video surveillance, energy management, VoIP, door video intercom and multi-room ambient sound control are no longer isolated elements in your home (house or apartment). With iSimplex, they now are a network that offers you great benefits: a significant costreduction, new services and a centralized control of the entire platform are just a few examples.

The NCN5120 is the first from ON Semiconductor‘s family of KNX transceivers, handling the transmission and reception of data on the bus. NCN5120 integrates two high efficient DC-DC converters generating a fixed 3.3V and a second regulated voltage programmable between 3.3 and 21 V. The convertors retrieve power from the bus and have 100mA drive capability each. NCN5120 additionally has a fixed 20 V integrated regulator. This KNX transceiver has been designed to reduce the bill of material while assuring safe and reliable coupling to the bus thanks to its programmable current slope, bus voltage and temperature monitoring. Available in QFN40 6x6 package, NCN5120 supports both SPI and UART interface to the host microcontroller.

The “professional switch“ from PEAR Automation delivers 21 potential free 16A outputs for 230VAC and C-load 200µF. The actuator has optimal wiring comfort because of connections on both sides on a width of only 12TE. The powerful ETS-product database offers numerous adjustment possibilities next to the following main functions: • behaviour on power breakdown / return • two free linkable central functions • disable function, forced guidance • staircase lighting function or ON-/OFF delay • five storable 8-Bit scenes per channel • channel-dependent logic functions • four innovative channel-independent logic functions

This range of dimmer actuators is designed for direct installation within ceiling cavities with power and communications connections via a structured cabling solution allowing fast installation without the use of tools. Each control output supports DALI, 1-10v and DSI protocols. The device is readily integrated with a BMS via the KNX control network, making it ideally suitable for Office installations where a cost effective solution is required. It is available with either three or four pole power wiring and two pole communication wiring systems from Wieland. There is an optional HD – heavy duty relay version for applications where high in-rush currents occur.

The PDBC120-DALI KNX actuator is designed for cost-effective control of DALI ballasts providing a full universe as well as communication to Philips DALI multifunction sensors and dry contact interfaces installed on the DALI bus – this reduces in-field cabling requirements substantially. It has an integral DALI bus power supply making switchboard wiring easier and saving space by having less devices. Direct DALI to KNX mapping means that DALI imposed limits, such as maximum 16 groups per universe are seamlessly overcome allowing a fully scalable network solution.

preussen automation introduces a new KNX dimmer family. The dimmer KNX-Series provides the convenience of switching and dimming different lights. Dimmers are available in four versions with one, two, four or six channels. With the KNX-phase dimmers dimME product range, you can easily control up to six independent light zones and ten scenes. The maximum total load for all products of the dimmer family is six ampere. The bus connection is established through a KNX terminal, the device can be installed on a standard 35 mm mounting rail.

preussen automation´s newest KNX product is the multifunctional sensor Motion 360 KNX. The sensor is suitable for indoor ceiling mount. With its 360° detection angle, it is applicable as motion detector, luxmeter as well as temperature sensor. Starting from February 2012, the sensor will be available.

The new RC1180-KNX2 from Radiocrafts is the world‘s first RF module supporting KNX Multi, which improves RF redundancy and achieves a better radio link, targeting the home and building automation market. The KNX RF Multi solution is switching between five different radio channels and enables devices to be in a non-permanent receiving mode, providing more reliability and efficiency in power consumption. Fast acknowledgement and re-transmitter features are included. The module operates in the 868 MHz band and is a surface-mounted, high performance transceiver module measuring only 12.7 x 25.4 x 3.3 mm for easy integration into sensors or actuators.

KNX Multi can use up to 5 RF channels, respectively the fast channels F1, F2, F3 and the slow channels S1 and S2. The scanning sequences are handled by the RC1180 KNX radio module: • three fast channels intended to be used with human controlled applications i.e. lights, shutters, etc. • two slow channels intended to be used with NPRM devices for automatic applications like sensors, heat control, etc. NPRM devices sleep when not scanning for KNX packets. In that way they are intended for battery operation. PRM devices should be mains powered, since they are always scanning for KNX frames, even when not receiving or transmitting. The reception and scanning sequences depends on the receiver capabilities.

This new sensor combines the measurement of carbon dioxide, temperature and relative humidity. As CO2 levels which are too high are a reliable indication of poor ambient air, these levels can be used to effectively monitor the air quality - e.g. in offices/conference rooms, schools/kindergartens, restaurants and in passive or low-energy houses. Buildings and people can be protected just as reliably against the effects of humidity levels which are too low or too high. Three separate limit values are available for CO2 and humidity and a limit value is also available for temperature. The CO2 thresholds can be set within a range of 500 - 2500 ppm.

This new flush-mounted actuator enables space-saving retrofitting in two neighboring size 60 switch boxes (potential separation), e.g. for saving energy in different types of buildings. Floating window contacts or push-buttons can be connected with the active SELV inputs; basic functions can already be operated already without ETS due to factory programming. The actuator is part of a new family of six 1-gang actuators with integrated inputs. Loads are connected via prefabricated 20 cm long cores, the inputs and the KNX are connected via a six-core cable with shared sheath. Theinput cables may be max. 5 m long.

With a compact gateway, DALI lighting technology can be conveniently integrated into KNX systems around the world thanks to a wide voltage range from AC/DC 100 ~ 240 V, 50/60 Hz. Up to 64 digital electronic ballasts can be named individually and thus easily distinguished from each other and also controlled individually or in 16 groups or light scenes. Various modes, such as normal, night or panic, as well 16 controlled effects further expand the range of uses. Emergency tests and a burn-in function complete its advantages. An hour counter and detailed failure reports make maintenance easier. DALI commissioning is conducted via an IP connection on a PC, smart phone, or directly on the integrated display.

For building management simple planning, energy efficient use, and flexible expansion options are required. Uniq provides a comprehensive solution for each building from one source. A standardised user interface allows you to intuitively control all devices, including remote access via PC and smart phone. As a central control unit with a VoIP-telephone system, the Uniq server can integrate KNX and IP components as well as other devices such as cameras, TVs or beamers - even during continuous operations. The visualised energy consumption, monitoring and evaluation functions increase efficiency, and installation is easy thanks to the mounting box and plug-and-play.

With the new presence and motion detectors it is possible to control lighting systems in office and commercial buildings according to demand – optionally also with constant light level control. The passive infrared detectors with swiveling sensor head under the designer cap are suitable for ceiling mounting, either flush or in a surface-mounting enclosure. Both versions have an integrated infrared receiver for remote control using infrared (IR). Calibration is performed with ETS or optionally by IR remote control. The sensing range of the detectors is 360° horizontally and approx. 100° vertically.

TPUART2 is the next generation of the widespread TPUART transceiver. It is digitally compatible with its predecessor so that communication stacks and drivers can be used without modification. It offers enhanced features including efficient stabilized 3.3V and 5V power supply with 30mA maximum current (50mA when 20V not used), switchable 20V power supply with limiting function and a smaller QFN36X36 package. This module completes the extensive range of Siemens KNX components (consisting of transceivers, processors as well as the M13x series bus interface modules) available for KNX manufacturers.

The GAMMA room temperature controllers UP237K and UP254K are available in different design variations to match the DELTA line. These controllers offer user-friendly visualization and improved operating safety as well as energy-saving features designed to help make buildings more sustainable. One outstanding feature is the logically arranged LED displays which indicate operating and error states. Room users are able to see not only that a room is not being operated within the optimal temperature range, but also the reason why.

These new space-saving installation boxes by Siemens are suited for mounting under floors or inserted ceilings. They offer space for up to eight sensor or actor devices with their own KNX connection. The RoomControlBoxes cover following disciplines: lighting (switching, dimming), shading and electro installations. Thanks to the installation within the room axis, the cabling effort is reduced. All the actors can randomly switch one of the three phases. This reduces large variations in network load.

With RDG100KN, RDG400KN, RDF301, and RDU340 Siemens launches a new generation of communicating KNX room thermostats that excel in high energy efficiency and versatility. The choice connection facilities enable the products to be used on a wide variety of applications – from fan coil units to variable air volume control, chilled ceilings, and radiator heating systems. The thermostats also offer ease of operation, and installation, as well as integration into HVAC control systems like Siemens’ Synco.

The networked GxB air volume controllers recently introduced by Siemens can be used together with the communications-enabled RDx room thermostats and the revised Synco 700 RMU universal controllers to create an innovative and flexible system solution for variable air volume systems. This system solution covers all requirements for climate control in buildings, ranging from heating and cooling to primary air handling. Building operators using this KNX based solution to benefit from increased comfort, high energy efficiency, and lower costs.

Whether at home or on the go, the new Siemens HomeControl app provides you with constant access to the HVAC regulator product lines Synco living, Synco 700, Sigmagyr and Albatros. At a glance, you can see whether the system at home or your vacation home is working without interruption. If adjustments are required, the user friendly navigation enables access to the most important information and settings. The app is available in the following five languages: English, German, French, Italian and Spanish.

eSolar is a system for monitoring and managing locally or remotely maintening photovoltaic systems. eSolar includes a home automation engine, using the KNX communication protocol. eSolar is able to communicate with most of the photovoltaic inverters, energy meters, string controllers available in the market through its RS-485 and ETHERNET interfaces and pulse output so at to obtain the measured quantities. eSolar can interact with a KNX installation, allowing remote control. Through the KNX bus it is able to integrate various types of sensors on the market and make actuations on the PV field.

The new animeo KNX 4 AC Motor Controller by Somfy can now be integrated with Wieland plug-in connectors. The Motor Controller is suitable for on-wall installation and can control four individually parameterable motors. Eight local pushbutton inputs can be used as KNX binary inputs, thus enabling universal functions such as ´Venetian blinds´, ´switch´, ´dim´, or ´send value´. In addition, with the KNX radio receiver, the room brightness can be set exactly with a scroll wheel, e.g. switching and dimming according to individual user wishes. The Motor Controller can also be easily combined with with the new Somfy sun protection central control, animeo KNX Master Control.

Pure aluminum and glass! The new touch series with multi-touch sensor is available as widescreen 10.2 \", 15.6\" and 21.5 \" display. Equipped with an Intel ATOM processor and the latest LED displays the power consumption is kept to a minimum. Dual- (10.2 \"and 15.6\") or multi-finger operation (21.5 \") possible by the dual- and multi touch sensor. The connection to the KNX Bus is solved by an optional integrated USB interface or can be done via an IP KNX interface. Allmajor KNX Visualizations that run on Windows XP/7 can be used. All Touch panels are fanless. Speaker and micro integrated.

For testing the KIMaip Module the new and extremely advanced evaluation board offers several functions within a minimum amount of space: an application controller for testing the KIMaip connection with the external master, push button and two LEDs emulating one input and two outputs, a galvanically isolated USB-interface to connect a PC with hyperterminal. The application controller contains a demo software, emulating inputs and outputs and translating the telegrams from the I²C-interface into an ASCII-based protocol. A brand new databank entry is also available for this demo. Get going!

The hardware solution KAIphys revolutionized the hardware connection to the KNX bus. The KAIphys evaluation kit allows simple and easy testing of KAIphys’ high performance and characteristics. The evaluation kit is comprised of not only the hardware, but also detailed documentation and application examples, as well as the complete communication software KAIstack. This combination, KAIphys and KAIstack as a basis for complete KNX devices, allows remarkably cost effective and flexible KNX solutions, to be realized without great ado. KAIphys – the hardware component of the KAI (KNX Advanced Interface) technology platform for KNX enabled bus devices.

The new evaluation boards for the product KAIstack - the main software component of KAI (KNX advanced interface) that provides the complete functionality needed for KNX devices – enable efficient product development with a diversity of microprocessors from many manufacturers (TI, STM, ATMEL). Different media such as KNX TP, KNX RF and KNX IP as well as several interface modules like KAIphys, TP-UART(2), ELMOS E981.03 for TP respectively SEMTECH SX1211 for RF are supported. Through push buttons, LEDs and all on pin header connected portpins you will get an excellent test hardware and the development work will be facilitated.

The new line coupler from Tapko is the first line coupler for telegrams up to 250 bytes and the ability to disable the filtering of messages temporarily by pressing a button which makes the commissioning of the system easier. The temporary access to other lines is possible without complex download from ETS. In addition, a faulty communication on the bus is indicated through LEDs at the device. The line-/ backbone coupler provides a data connection between two separate KNX bus lines and also galvanically isolates the bus lines from each other. It can be used as line coupler, backbone coupler or repeater in any KNX network. Also available as OEM version.

tci presents with the amena70 a touch for the Android software platform. The touch panels offer the same ease of use as the Android smartphones. The 7\" multitouch display has a flat and continuous glass surface. As a wall-mounting device in industry quality the amena70 is designed for a long life cycle. Spare parts and service are available long term. Therefore, the touch panels are the ideal basis for reliable building control systems. Without fan and hard drive the power saving ARM9 system is maintenance-free and silent. The amena70 can be individually extended with the variety of available Android apps.

The touch panel PC 10Wmura of tci convinces with a simple elegance. An outstanding feature is the continuous and absolutely plain glass surface. This provides together (in conjunction) with the projective capacitive multi-touch sensor an excellent ease of operation as it is known for smartphones. The intuitive navigation with multi finger operation and gesture recognition enables easy to understand operating concepts for building automation. Even in ultra-flat design, the touch panels with a low-power Intel Atom CPU are fully fledged PCs with Ethernet, USB and KNX interface. The power supply via PoE (Power-over-Ethernet) is optionally available.

The interface module from Theben makes it possible to integrate DALI in the KNX building management system. 16 lighting groups can be connected and addressed with a total of 64 electronic DALI devices, e.g. electronic ballasts (EBs), transformers, LED converters, etc. Group-oriented KNX control is exclusively achieved via up to 16 lighting groups. 14 lighting scenes can be selected via 8-bit or 1-bit scene telegrams. All connected DALI participants can be controlled or requested in broadcast mode. Information on lamps or EB errors are available on with KNX for each lighting group or DALI participants. Manual switching of all DALI participants is possible via the test button on the device.

Fully-automatic solar protection control is achieved using the Meteodata 140 GPS KNX weather station. The flow sensor detects both crosswinds and upwinds. Three integrated light sensors are protected from getting dirty. Blind control is achieved via automatic calculation of the sun‘s position based on data received via GPS. Optimum slat adjustment enables azimuth and elevation values. The rain sensor and external temperature are designed to avoid damage to blinds and awnings. The transparent housing is suitable for white and coloured walls. The weather station can be set up quickly thanks to factory preset solar protection channels.

The new 8-channel TR 648 top2 RC KNX annual timer from Theben can be used universally. The quartz clock can also be synchronized via a DCF77 or GPS antenna. It is programmed via the keyboard or with OBELISK top2 PC software. Data is transmitted via the bus or the insertable memory card. In addition to the basic weekly program, there are 14 different weekly programs with priority levels set via 800 memory locations. Pulse, cycle and hour counters extend the range of applications. The location for the Astro program is determined via the integrated location database or GPS.

The PresenceLight 360 KNX presence detector is a versatile device, which means that a wide range of locations such as homes, offices, classrooms, storerooms or wet zones can be provided with energy-saving lighting control. The detection area, originally developed by can cover up to 64 m². The Presence- Light 360 KNX‘s sensitive detection capability will fulfill all the requirements of targeted, energy-efficient lighting and climate control. It supports the following functions: switching two light channels or constant light control with standby and scene numbers, two presence channels for the control of external systems such as HVAC. Parameters can be adjusted via the bus object.

The ThebenHTS PresenceLight 180 KNX Presence Detector is designed for wall mounting. It automatically controls lighting in reception areas, cellars, corridors, garages and wet zones thanks to the IP 54 protection rating. With a detection span of 16 m, the 180° detection area is up to 100 m². The KNX PresenceLight 180 fully meets the requirements for targeted, energy-efficient lighting and air conditioning. It supports the following functions: switching two light channels or constant light control with standby and scene numbers, two presence channels for the control of external systems such as HVAC. Parameters can be adjusted via bus object. Manual operation is possible via remote control.

KNX Power supply 640 mA can work separately or with an emergency power supply module with external battery. Status indicators can be used for control, visualization or maintenance purposes indicating availability of mains power. Device LEDs show the working status in the installation. The family of KNX power supplies will consist of 160, 320 and 640 mA versions, of which two types will be available. One type without and one type with LCD display indicating current consumption of all bus devices connected to the line of the operating power supply.

The KNX USB interface is designed as a snap on version for programing bus devices with ETS. Two LEDs indicate connection to the PC and connection to the bus, indicating bus traffic.

At light&building 2012, trivum will exhibit their newly designed TouchPad. From the basis of a high contrast display with 480x272 pixels and a capacitive touchscreen, a contemporary design has emerged that combines elegance with functionality. The of the intuitive menu lies in its simplicity: all main functions can be accessed immediately, e.g. there is no need to navigate through the menu in order to listen to the radio, change stations, adjust the volume or turn on the TV. Thanks to KNX backing, every TouchPad is itself an intelligent KNX switch with the ability to control lights, blinds and temperature.

The new nine channel motor control of Vestamatic moves comfortably and nine 230VAC motors with two end switches accurately. The motor control encompasses among others the following automatic runtime detection, 9/18 binary inputs for standard/ KNX switches, test button for implementation. The configuration is possible with ETS3.

KNX Solar Centre is the new energy efficient sun shading controller with integrated sensors and line coupler in one unit. The central controls allows the movement of up to eight facades or groups of sun protection with different shading programs, individual failure detection and up to three security objects per façade/ group. Wind, wind direction, lux, temperature, rain/ frost values are exactly measured in the unit with ultrasound. External sensors can also be included. Configuration possible from ETS3.

The new KNX dual-zone thermostat is the ideal product for climate control in hotel rooms where it is also necessary to regulate the temperature of the adjoining bathroom. By calculating the set point, averaging the values measured by the external and internal probes, the new Vimar device can even be used in large spaces characterized by significant temperature gradients. Aesthetically coordinated with the design of the Eikon, Idea and Plana series, the dual-zone thermostat can also display up to eight additional temperatures measured by KNX probes or thermostats sharing the same bus.

With Eikon Evo German standard cover plates, Vimar KNX devices find a new dimension of beauty marked by an all-Italian style. Two-zone thermostats for intelligent climate management, infrared detectors that automatically control the lights if there is someone in the room, with integrated dusk/ dawn sensor, four independent, interchangeable led-fitted buttons to control lighting, shutters and home automation, can all be matched to eight different precious materials to create control switches which reflect the latest interior design trends.

The VIMATY 70ZR is a wireless ZigBee 2-ways radio touch panel. It is capable of controlling KNX devices by communicating wirelessly with the ZigBee to KNX gateway ZigAccess-KI. This interface allows the ZigBee link between the wireless touch screen and KNX devices. It can also be used as a repeater in the ZigBee wireless network to increase the range of wireless communication. VIMATY 70ZR can also directly control infrared devices to function as a universal remote control and command audio-visual devices. Very easy to use, equipped with a screen that adjusts the brightness of the ambient light intensity, VIMATY 70ZR is the ideal wireless interface for driving a full house equipped with KNX.

The TACTUM 4NTR is the new VITY touch panel for residential and professional environment management. Equipped with an IP port, it is directly connected to the network to control Vity IP equipment directly or simply access to the Internet. Its KNX integrated port allows to directly link up to the KNX Bus to drive the electric equipment. Through IP or KNX, this clever remote control is able to analyze and display the energetic consumption of the house and use this information to launch a command to the piece of equipment concerned to reduce consumption. The TACTUM 4NTR can be supplied with power through the RJ-45 thanks to power over Ethernet. The design of the buttons is customizable.

The new WAREMA climatronic with KNX connection is pre-configured for sun shading systems, windows, and lighting up to 32 channels. It will be operated by multifunctional dial and glass sensor keys. All settings can easily be seen at the TFT display. The parameters can be set either at the control panel or at the PC. Furthermore they can be saved on a SD card. Useful functions like slat tracking are also taken into consideration. In order to save energy it is very important that the façade, the sun shading systems and eventually further crafts work together perfectly. The WAREMA climatronic is here the best solution.

The KNX Tiny Serial Interface 810 offers a simple connection to the KNX Bus Twisted Pair including galvanic isolation. The connection is via UART (3 - 5V). A variant with USB is available as well. The communication is based on a modified TP-UART protocol without real-time requirements to the host. The Tiny Serial Interface is ideally suited for connecting KNX devices running Linux, Windows CE and Android, among others. A cross platform SDK is also available to integrate Tiny Serial into your application.

KNX-RF (radio frequency) is the wireless communication within the KNX Standard. The KNX RF/TP Coupler 670 connects KNX wireless components with the KNX bus (twisted pair). The coupler is bidirectional and has 24 channels. The bus-side is configured with the ETS as an end device with communication objects; the RF devices are linked locally using Easy Push Button Mode. An LCD display shows the current configuration of the channels. The device is powered by the bus.

The module KNX BAOS 822 is a serial interface (TTL) to the KNX bus, which also provides the supply voltage for the entire device from the bus. The module includes a complete KNX stack and serves as an interface to the bus on telegram level as well as to the data point level. Thus, various devices can be connected to the bus. It can be configured up to 250 objects in the ETS. Individual ETS entries can be created with the ETS manufacturer tool. Module Size: 30x25 mm.

The KNX USB interface 311 is the compact successor to the KNX USB Interface 310. This interface enables a bidirectional connection between a PC and the KNX bus. The USB connector has a galvanic separation from the KNX bus. The interface is compatible with ETS and is supported by many visualization programs. To integrate the interface in own software a free SDK for different platforms (eg Windows, Linux) is available. The width is one unit (18mm).

The NV Comfort™ - a KNX controller for natural ventilation - now with unique, energy saving sun screening algorithm for sun screening control. By automatic control of roof and façade windows and sun screening products, the NV Comfort™ ensures an optimal indoor climate. The opening/closing of windows and control of sun screening products is based on input from KNX sensors (temperature, CO2, RH and Lux) and weather station (rain, wind speed and temperature). Configuration of settings/user preferences is done on the control unit’s 7\" WVGA touch screen. NV Comfort™ can also send signals to KNX heating actuators, hybrid ventilation, lighting etc.

The new Woertz ecobus combi flat cable 5G2.5 mm² + 2 x 1.5 mm² looks like its predecessor: it comprises a power current part and a parallel drawn bus part with special shielding which are molded in a single cable sheath. The bus lines safely offer an interference-free transmission of KNX signals in the whole installation. The corresponding new boxes IP68 are simply pushed on the smooth surface of the flat cable and connected. For the first time, KNX bus systems may now be used under more stringent conditions. The asymmetric profile of the cable prevents incorrect mounting. The cable is available in PVC and halogen-free FR/ LSOH version.

Just one click! The new waterproof boxes may be installed on the smooth surface of the Woertz ecobus combi flat cable 5G2.5 mm2 + 2 x1.5 mm2 and contacted in a very short time. Secure and quick mounting without any tool! Thanks to the patented piercing technology; all the leads are contacted at the same time. The junction box used in combination with flat cable with smooth surface has led to an IP68 protected system. The box is well dimensioned and is also provided with a power current part and a bus part. The high protection degree now enables KNX technology to also be applied under more stringent conditions.

The MultiRoom-Controller is an interface which allows the temperature of different rooms to be regulated by only one Fan coil unit. After the different temperature set values have been entered, the MRC calculates the temperature having to be reached by the air supply. Based on the reference values the input of air to the rooms is regulated in accordance to the fan speed. With four channels several rooms can be cooled by the air supply. The MRC can be connected to analog devices as well as CO² sensors. With the use of a MRC up to three Fan Coil aggregates can be replaced. Thereby the energy consumption, maintenance and investment costs will be reduced.

MAXinBOX16 is a 16 output multifunction actuator in a high quality eight DIN rail unit enclosure that can address the most demanding of projects. MAXin- BOX16 outputs, each 16A type A can support capacitive loads up to 140 uF, and may be configured individually (up to 16) or as shutters/blinds channels (up to eight). Extra functionality is provided by the inclusion of a powerful logic module. LEDs indicate the state and buttons allow the manual control of each output. No external power supply is required and no program download is necessary to test the device during installation. An incredibly versatile device, likely to become essential to the KNX integrator!

LUMENTO is a low voltage (12 – 24 V DC) LED dimming controller by Zennio which comes in two variations, the X3 and the X4, for the control of three channels (RBG) or four channels (RGBW) respectively. The channel dimming is achieved by means of varying the voltage using PWM, with a 2.5 amp current limit per channel. The low profile enclosure allows the installation of the device close to the LED load, and screw terminals ensure that wiring up is effortless. A powerful application program is provided to configure LUMENTO’s impressive functionality; light dimming, scenes, sequences, color selection, timers, test mode, etc.

KNX Energy Saver (KES) is Zennio’s contribution to reducing energy consumption in smart homes and buildings. Split current transformers, placed around the circuit wires, allow the measurement of instantaneous electric power and energy consumption of up to three different single-phase circuits or a single three-phase circuit of up to 75A current each. In addition, KES provides information about the corresponding CO2 emissions and cost of energy in the desired currency. The monitoring of instantaneous electric power limits and the powerful logic modules are added features that make KES a useful tool for the KNX partner to optimize energy efficiency in homes and buildings.

InZennio Z41 is a 4.1” portrait capacitive color display touch panel. Minimalist aesthetics lead to a timeless design that facilitates integration within working and living environments. Customized appearance is possible by means of theme selection. Home pages with configurable controls and indicators will ease the management of the main functionality in KNX installations, whereas more specific HVAC, Scenes, Alarms and Timer functionalities are accessed through its Menu. The internal temperature probe and thermostats are additional features. Z41 also includes an internal clock with battery, USB and IP ports for firmware updates. IP functionality is an optional feature.